AKT 808 PRODUCT DESCRIPTION SHEET
5019 319 01047
CZ
SK
BG
HU
RO
SL
GB
HR
PL
DIMENSIONS OF THE HOB (mm)
2
1
3
4
5
1. Radiant cooking zone Ø 145
2
. Radiant cooking zone Ø 210
3
. Radiant cooking zone Ø 145
4
. Radiant cooking zone Ø 180
5
. Display
I
mportant:
T
o avoid permanently damaging the glass-ceramic
t
op, do not use:
-
Pots with bottoms that are not perfectly flat.
-
Metal pots with enamelled bottom.
A
ny aesthetic defects (scratches, surface marks,
e
tc.) must be reported immediately upon
i
nstallation.
Type PLEAA 230 V ~ /400 V 3 N ~ 50 Hz 6.2 kW
D
B
A
C
IMPORTANT: For safety reasons, the hob is equipped with an automatic cut-off function. Prolonged use of the same
heat setting triggers automatic switch-off of the cooking zone (for example, after around 1 hour at maximum heat setting,
the cooking zone switches off).
A On/Off C Heat setting decrease
B Cooking zone selection and heat setting increase D Child safety device
To switch the hob on, hold down buttonA for about 2 seconds. The 4 cooking zone displays show “0”. If within
20 seconds none of the cooking zones is activated, the hob switches off automatically as a safety precaution.
Press one of the buttons“B” corresponding to the cooking zone you intend to use.
Select the heat setting required with buttons “B” or “C”. Heat settings go from 1 to 9. Press buttons +/- at the
same time to cancel all settings.
IMPORTANT: the control is deactivated 10 seconds after the heat setting has been selected. To change the
heat setting, first press the selection button “B” again, then proceed to change the setting, using buttons “B”
or “C”.
The CHILD SAFETY function is switched on by holding down button“E” until a dot lights up above the function
button. The Child Safety function locks all the hob's other functions, with the exception of the On/Off button
“A”. This function remains on even after the hob has been switched off and on again. It can cancelled by holding
down button “E” until the dot above the function button switches off.
H
RESIDUAL HEAT INDICATOR.
When the cooking zone is switched off, the residual heat indicator “H” remains on or flashes alternating with
“0” until the temperature of the hob returns within safety levels.
-
1
-
2
Whirlpool AKT 809/LX Owner's manual
- Type
- Owner's manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Whirlpool AKT 808/NE Program Chart
-
Whirlpool AKT 809/LX Program Chart
-
Whirlpool AKT 805/NE Program Chart
-
-
-
-
Whirlpool AKT 842/BA Program Chart
-
-
-