2. DCS
  3. TDD120
TDD120

DCS TDD120 User guide

  • Hello! I am an AI chatbot trained to assist you with the DCS TDD120 User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What are the product dimensions of the DCS TDD120?
    What is the height of the bottom flange?
    What is the width of the handle?
    What is the minimum height from the ground to the bottom of the cutout?
    What are the cutout dimensions for the product?
    What is the overall depth of the product (including the handles)?
    What is the height of the top flange?
    What are the dimensions of the chassis?
Data sheet
Tower Drawer Double
Model no:
TDD1-20
(refer page 2 for metric measurements)
Product Dimensions
in
a Overall height of product
21 7/8"
B Overall width of product
20 5/16"
c Overall depth of product (excluding handles)
25"
d Depth of front frame
2"
e Width of front frame
1 1/8"
f Height of chassis
2O 1/2"
g Width of chassis
18 1/2"
h Depth of chassis
2"
i Height of bottom flange
29/2"
j Height of top flange
1/2"
k Width of side flanges
15/16"
l Width of handle
8"
m Height of handle
1 /16"
n Depth of handle
1 /16"
o Height of from bottom of product to top of bottom drawer
1 /8"
p Width of drawer fronts
17 1/16"
Cutout Dimensions
in
Overall width of cutout
18 7/8"
Overall height of cutout
20 11/16"
Clearance Dimensions
in
Minimum height from ground to bottom of cutout
1 /16"
IMPORTANT NOTE: This datasheet shows only the proud installation option.
For full installation and clearance details please refer to our installation
manual.
INDICATES CABINETRY / PRODUCT DATUM --------------------------
INDICATES CUTOUT -------------------------------------------------------
INDICATES CLEARANCES ------------------------------------------------
DATE: 28.08.2015
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm
(/2
''). Please read the installation manual for detailed information on
installing the product. www.dcsappliances.com
0 5 10 20
inches
25"
A
FRONT VIEW
PROFILE VIEW
C
j
d
d
G
F
p
k
k
20 5/16"
B
h
h
o
21 7/8"
PLAN VIEW
i
n
m
e
DATUM: FRONT OF CABINETRY
FOR PROUD INSTALLATION
DATUM: FRONT OF CABINETRY
FOR PROUD INSTALLATION
l
DATUM: BOTTOM OF PRODUCT
CLEARANCE: GROUND LEVEL CLEARANCE: GROUND LEVEL
Data sheet
0 100 200 400
millimetres
Tower Drawer Double
Model no:
TDD1-20
(refer page 1 for imperial measurements)
Product Dimensions
mm
a Overall height of product
556
B Overall width of product
516
c Overall depth of product (excluding handles)
66
d Depth of front frame
51
e Width of front frame
28
f Height of chassis
520
g Width of chassis
469
h Depth of chassis
585
i Height of bottom flange
2
j Height of top flange
1
k Width of side flanges
2.5
l Width of handle
204
m Height of handle
0
n Depth of handle
0
o Height of from bottom of product to top of bottom drawer
40
r Width of drawer fronts
452
Cutout Dimensions
mm
Overall width of cutout
480
Overall height of cutout
525
Clearance Dimensions
mm
Minimum height from ground to bottom of cutout
0
IMPORTANT NOTE: This datasheet shows only the proud installation option.
For full installation and clearance details please refer to our installation
manual.
INDICATES CABINETRY / PRODUCT DATUM -------------------------
INDICATES CUTOUT -------------------------------------------------------
INDICATES CLEARANCES ------------------------------------------------
DATE: 28.08.2015
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm
(/2
''). Please read the installation manual for detailed information on
installing the product. www.dcsappliances.com
636
A
FRONT VIEW
PROFILE VIEW
C
j
G
F
r
k
k
516
B
h
o
740
PLAN VIEW
i
n
m
e
DATUM: FRONT OF CABINETRY
FOR PROUD INSTALLATION
DATUM: FRONT OF CABINETRY
FOR PROUD INSTALLATION
l
DATUM: BOTTOM OF PRODUCT
d
d
h
CLEARANCE: GROUND LEVEL CLEARANCE: GROUND LEVEL
/