The Superlux ECM888B is a 1/4" measurement microphone with a wide frequency response, making it perfect for spectrum analysis, audio testing, measurement applications, and recording. It has a metal structure with a champagne silver finish and a built-in 6V 4LR44 battery that provides power for over 200 hours of use.
The Superlux ECM888B is a 1/4" measurement microphone with a wide frequency response, making it perfect for spectrum analysis, audio testing, measurement applications, and recording. It has a metal structure with a champagne silver finish and a built-in 6V 4LR44 battery that provides power for over 200 hours of use.
1
Contact
Marketing and sales
Superlux Taiwan
+886-2-26931323
Manufacturing & logistics
Superlux Enterprise
Development ( Shanghai ) Co., Ltd.
English
ECM888B
1/4"MEASUREMENT
MICROPHONE
2
GENERAL DESCRIPTION
The ECM888B is a 1/4” standard
measurement microphone powered by
an internal battery. There is no external
power needed for easier connection
to various devices such as a real time
analyzer, PC, or palm-size devices. Its
wide and at frequency response makes
the ECM888B an ideal measurement
and recording microphone.
FEATURES
• Metal structure with champagne silver
nish
• Wide frequency response from 20 Hz
to 20 kHz
• Suitable for spectrum analyzer, audio
testing and measurement applications
• Internal battery, 6V 4LR44 battery
• 1/4” industrial standard diameter
ECM888B
1/4"MEASUREMENT MICROPHONE
3
ECM888B FREQUENCY RESPONSE ( Omni )
Omni
With equal sensitivity in all directions, an omni microphone doesn’t need to point toward
the sound source. It features low handling and wind noise. It is welcomed for news
gathering and music recording applications.
APPLICATIONS
Measurement / Recording
ECM888B
4
Unit:mm/inch
5
SPECIFICATIONS
Type Back electret,
Ø6 mm (Ø0.24”)
Polar Pattern Omni
Frequency
Response
20-20,000 Hz
Sensitivity -43 dBV/Pa (4 mV)
Output
Impedance
800 Ω
Min. Load
Impedance
3 kΩ
S/N Ratio 72 dB
Equivalent
Output Noise
22 dB
Max. SPL 132 dB SPL
Dynamic Range 110 dB
Power
Requirements
6V 4LR44, 0.5 mA,
>200 hours
Finish Champagne silver
Connector XLR3M
Dimensions
Ø21170 mm
Ø0.83”6.7”
Net Weight 150 g (5.3 oz),
without battery
*Note:Specications are subject to change.
CAUTIONS
• When the microphone is connected, do
not un-screw the microphone that may
cause impact signal to the connected
system.
• Turn off the level on the audio system
before disconnecting the microphone.
• Battery life time is 300 hours. If the
signal is low or no signal, replace the
battery.
• Before replace the battery, disconnect
the microphone from the system.
• Insert the battery according to the
illustrated polarity on the body. Anode
shall point toward the XLR3M plug.
Cathode shall point to the capsule tip. If
the battery is not properly inserted, the
microphone will not be damaged, but
will not work either.
• To save the battery power, remove the
battery when the microphone will not be
used for a long period.
• Place foam wind screen when in out-
door to reduce wind noise.
6
ECM888B ACCESSORIES FURNISHED
HM32
Shock mount
MS131
Adjustable
boom stand
MS104
Instrument
boom stand
HM6
Table top
microphone
stand
S02
Foam
windscreen
HM10B
Mic clip
4LR44
6V alkaline battery
OPTIONAL ACCESSORIES
7
!
!
!
SAFETY PRECAUTIONS
Safety symbols-“WARNING” AND “CAUTION”- and messages described below are
used in this manual to prevent bodily injury and property damage which could result
from mishandling. Before operating your product, read this manual rst and understand
the safety symbols and messages so you are thoroughly aware of the potential safety
hazards.
!
WARNING: Indicates a potentially hazardous situation which, if mishandled,
could result in death or serious personal injury.
CAUTION: Indicates a potentially hazardous situation which, if mishandled,
could result in moderate or minor personal injury, and/or property damage.
WARNING
‧Do not expose the unit to rain or an environment where it may be splashed by
water or other liquids, as doing so may result in re or electric shock.
‧Do not attempt to modify this product. Doing so could result in personal injury
and/or product failure.
CAUTION
‧Do not subject to extreme force and do not pull on the cable or failures may
result.
‧Keep the device dry and avoid exposure to extreme temperatures and humidity.
8
LIMITED WARRANTY
Superlux Enterprise warrants all materials and workmanship under use as instructed by the user’s
manual of this product for a period of one year from the original date of purchase. Warranty period
might be different by each area. Please contact your local dealer for more information. If any defects
are found in the materials or workmanship or if the product fails to function properly during the applica-
ble warranty period, Superlux Enterprise, at its option, will repair or replace the product. This warranty
applies only to equipment sold and delivered by Superlux Enterprise’s authorized distributors or
dealers. However, the following are not covered: Damage caused by accident, misuse, abuse, product
modication or neglect; damage occurring during shipment; damage resulting from failure to follow
instructions contained in your Instruction manual; damage resulting from the performance of repairs
by someone not authorized by Superlux; claims based upon any misrepresentations by the seller; any
Superlux product on which the serial number has been defaced, modied or removed. Service and
repairs of Superlux products are to be performed only at a factory-authorized facility or authorized
distributors or dealers. Unauthorized service, repairs, or modication will void this warranty. To obtain
repairs under warranty, you must have a copy of your sales receipt from the authorized Superlux
dealer where you purchased the product. It is necessary to establish purchase date and determine
whether your Superlux product is within the warranty period. To obtain factory authorized service,
please contact authorized distributors, dealers or mail to [email protected].
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES CLASS B. OPERATION IS SUB-
JECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MUST NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE
THAT MAY CAUSE UNDESIRED OPERATION. SUITABLE FOR HOME OR OFFICE USE.
www.superlux.com.tw
P/N:LB100888B01EN MAY, 2018
9
Contact
中国地区营销和业务
旭 广 企 业 发 展（ 上 海 ）有 限 公 司
021-69223756
support_cn@superlux.com.tw
国际营销和业务
Superlux 舒伯乐 台湾
+886-2-26931323
sales@superlux.com.tw
简体中文
ECM888B
1/4"
测量麦克风
10
ECM888B
1/4"
测量麦克风
概述
1/4 6V
PC
特征
•
•
•
• 4LR446V
200
• 1/4
应用
11
ECM888B频率响应图（无指向）
无指向
ECM888B
12
/
13
规格
Ø6 mmØ0.24"
20-20,000 Hz
-43 dBV/Pa4 mV
800
3K
72 dB
22 dB
132 dB SPL
110 dB
6V 4LR44,
0.5 mA, >200
XLR3M
Ø21170 mm
Ø0.83"6.7"
150 g5.3 oz
*
注意事项
•
• XLR
• 300
•
•
-
•
•
14
ECM888B随货附件
HM32
MS131
MS104
HM6
S02
HM10B
4LR44
6V
选购配件
15
!
!
!
!
安全事项
16
保固服务
Superlux
Superlux
Superlux
Superlux
SuperluxSuperlux
Superlux
support_[email protected]w
FCCB15
www.superlux.com.tw
P/N:LB100888B01EN MAY, 2018
17
Contact
中國地區行銷和業務
旭廣企業發展（上海）有限公司
021-69223756
support_cn@superlux.com.tw
國際行銷和業務
Superlux 舒伯樂 台灣
+886-2-26931323
sales@superlux.com.tw
繁體中文
ECM888B
1/4"
測量麥克風
18
ECM888B
1/4"
測量麥克風
概述
1/4" 6V
PC
特徵
•
•
•
• 4LR44(6V)
200
• 1/4
應用
19
ECM888B頻率響應圖（無指向）
無指向
ECM888B
20
/
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
The Superlux ECM888B is a 1/4" measurement microphone with a wide frequency response, making it perfect for spectrum analysis, audio testing, measurement applications, and recording. It has a metal structure with a champagne silver finish and a built-in 6V 4LR44 battery that provides power for over 200 hours of use.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
