LifeGear 97512 Owner's manual

LifeGear
Brand
LifeGear
Model
97512
Category
Fitness, gymnastics & weight training
Type
Owner's manual
LEADER WALK
SMART PAD TREADMILL
ITEM NO: 97512
OWNER’S MANUAL
IMPORTANT: Read all instructions carefully before using this product. Retain this
owner’s manual for future reference.
The specifications of this product may vary from this photo and are subject to change
without prior notice.
2021, Jan.
Bluetooth Kinomap App
1
TABLE OF CONTENTS
WARRANTY
-------------------------------------------------------------------------------- 2
IMPORTANT SAFETY INSTRUCTIONS ------------------------------------------- 3
PARTS LIST -------------------------------------------------------------------------------- 5
COMPONENTS --------------------------------------------------------------------------- 7
TOOL ---------------------------------------------------------------------------------------- 7
EXPLODED VIEW ------------------------------------------------------------------------ 8
ASSEMBLY INSTRUCTIONS --------------------------------------------------------- 9
STORAGE ---------------------------------------------------------------------------------- 14
ADJUSTMENT ----------------------------------------------------------------------------- 17
MOVING THE TREADMILL ------------------------------------------------------------ 17
OPERATING THE COMPUTER ------------------------------------------------------ 18
ERROR MESSAGES -------------------------------------------------------------------- 20
CARE, MAINTENANCE & TROUBLESHOOTING GUIDE -------------------- 21
BELT ADJUSTMENT -------------------------------------------------------------------- 22
LUBRICATION ----------------------------------------------------------------------------- 23
EMERGENCY STOP -------------------------------------------------------------------- 23
WARM UP AND COOL DOWN ROUTINE ----------------------------------------- 24
2
ONE YEAR LIMITED WARRANTY
LifeGear Inc. warrants to the original purchaser that this product is free from defects in
material and workmanship when used for the purpose intended, under the conditions that
it has been installed and operated in accordance with LifeGear's Owner's Manual.
LifeGear's obligation under this warranty is limited to replacing or repairing free of charge,
any parts which may prove to be defective under normal home use. This warranty does
not include any damage caused by improper operation, misuse or commercial application.
From the date of purchase, the frame is warranted to be free from defects for 1 (one) year.
This warranty is offered only to the original owner and is not transferable. Proof of
purchase is required.
When ordering replacement parts please have the following information ready:
1. Owner's Manual
2. Model Number
3. Description of Parts
4. Part Number
5. Date of Purchase
3
IMPORTANT SAFETY INSTRUCTIONS
Basic precautions, including the following important safety instructions should always be
followed when using this treadmill. Read all instructions before using this treadmill.
DANGER: To reduce the risk of electric shock, always unplug the treadmill
from the electrical outlet immediately after using and before cleaning, assembling, or
servicing the treadmill.
Failure to follow these instructions may lead to personal injury and cause damage
to the treadmill.
WARNING: To reduce the risk of burns, fire, electric shock or injury to any
persons, please read the following:
Never leave the treadmill unattended while plugged in. Disconnect by turning off the
master power switch and unplugging from wall outlet when not in use and before
putting on or taking off parts.
Use this product only for its intended use as described in this manual. Do not use
attachments not recommended by the manufacturer.
Never operate the treadmill if it has a damaged cord or plug, or if it is not working
properly. If it has been dropped or damaged, or been exposed to water, return the
product to a service center for examination and repair.
Do not attempt any maintenance or adjustments other than those described in this
manual. Should any problems arise, discontinue use and consult an Authorised
Service Representative.
Never operate the product with the air openings blocked. Keep the air openings
free of lint, hair, and other obstructions.
Do not use the treadmill outdoors.
Do not pull the treadmill by its power cord or use the cord as a handle.
Keep children and pets away from the equipment while in use.
Elderly or disabled users should only use this treadmill in the presence of an adult
who can provide assistance if required.
Do not operate where aerosol (spray) products are being used or where oxygen is
being administered.
Keep dry - do not operate in a wet or moist condition.
The motor cover can become hot while the treadmill is in use. Do not place the
treadmill on a blanket or other flammable surface as this can create a fire hazard.
Keep electrical cord away from heated surfaces.
Keep the treadmill on a solid, level surface with a minimum safety area clearance
of two meters around the treadmill. Be sure the area around the treadmill remains
clear of any obstructions during use.
This treadmill is for domestic household use only.
Only one person should use the treadmill at a time.
Wear comfortable and suitable clothing when using the treadmill. Do not use the
treadmill barefoot or in socks. Always wear appropriate athletic footwear. Never
wear loose or baggy clothing as it can become caught on the treadmill and create an
entrapment hazard.
4
Always hold on to the handrails while using the treadmill.
Do not leave children who are under 12 years-old unsupervised near or on the
treadmill.
To disconnect, turn all controls to the off position, then remove plug from the wall
outlet.
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children should not be allowed to play on or near the treadmill at any time.
CAUTION - RISK OF INJURY TO PERSONS - To avoid injury, use extreme caution
when stepping onto or off of a moving treadmill belt. Carefully read this instruction
manual before use.
Maximum Weight Capacity is 90 kg.
Pull out the Safety Tether Key for emergency stop.
This unit must be plugged into a nominal 220 volt 50/60Hz outlet which has been
grounded.
Keep hands clear of all moving parts. Never place hands or feet under the treadmill
while in use.
Do not use the treadmill on a carpet that is greater than 1.3 cm in height.
Before using the treadmill, check that the belt is aligned and centered on the running
deck and all visible fasteners on the treadmill are sufficiently tightened and secure.
Cleaning and user maintenance shall not be made by children without supervision.
If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
Never operate this treadmill if it is in the folded position.
Allow the running belt to fully stop and unplug the power cord from the wall outlet
before folding up the treadmill.
Always face towards the computer console and do not run backwards on the running
belt.
WARNING: Before beginning any exercise program consult your physician.
This is especially important for people who are over 35 years old or who have
pre-existing health problems. Read all instructions before using any fitness equipment.
Do not operate this exercise equipment without properly fitted guards, as the moving
parts can present a risk of serious injury if exposed.
CAUTION: Read all instructions carefully before operating this product. Retain
this Owner’s Manual for future reference.
5
PARTS LIST
No. Description Qty No. Description Qty
Mobile Device Holder 017 Power Socket 1
1A
Main Body of the Mobile
Device Holder
1 018 PC Plate 1
1B Mobile Device Clamp 1 019 Power Cord (L=1800 mm) 1
001
1C Elastic Band 1
1 Set
020 Safety Tether Key 1
Upper Computer Console 021 Running Belt (T1.6x460x2512mm) 1
2A
Upper Computer
Console Cover
1 022
Running Deck
(T15x563.4x1125mm)
1
2B Computer Control Panel 1 023
Cross Recessed Countersunk Head
Screws ST3x8
4
2C
Cross Recessed Pan
Head Screw ST2.5x6
7 024 Bushing 55x45.7x26.4 2
2D Bluetooth Module Wire 1 025 Bushing 50x48x30 2
2E
Safety Tether Key
Sensor with Wire
1 026 Handlebar Knob M8x16 2
002
2F Magnet 1
1 Set
027
Cross Recessed Countersunk Head
Screws ST3x4
4
Lower Computer Console 028 Left Handlebar Support Tube 1
3A
Lower Computer
Console Cover
1 029 Right Handlebar Support Tube 1
3B Bluetooth Module 1 030 Knob 2
003
3C
Cross Recessed Pan
Head Screw ST2.5x6
1
1 Set
031 Wire Grommet Ø12xØ24x9 2
004
Cross Recessed Pan Head Bolt
ST3.6x16
10 032L Left Side Rail End Cap 1
005 Front Cover 1 032R Right Side Rail End Cap 1
006 Rubber Pad 1 033 Side Rail (82x22x1100mm) 2
007 Upper Motor Cover 1 034L Left Tube Frame 1
008
Cross Recessed Pan Head
Tapping Screw ST4.2x16 (Ø10)
4 034R Right Tube Frame 1
009
Handlebar Foam Grip
T3.0x188mm
2 035
Hexagon Socket Round Head Cap
Bolt M6x15
22
010 Handlebar 1 036 Spring Washer M6 34
011
Cross Recessed Pan Head
Tapping Screw ST4.2x16
6 037 Washer M6 32
012 Control Cable (L=2200 mm) 1 038L Left Linking Plate 1
013 Power Control Board 1 038R Right Linking Plate 1
014
Hexagon Socket Round Head
Cap Bolt M5x10
2 039
Hexagon Socket Round Head Cap
Bolt M6x45
2
015 Fuse Box 1 040
Hexagon Socket Round Head Cap
Bolt M6x10
4
016 Power Switch 1 041
Hexagon Socket Round Head Cap
Bolt M6x20
10
6
PARTS LIST
No. Description Qty No. Description Qty
042 Nylon Nut M6 6 058 Belt 390J6 1
043
Hexagon Socket Round Head Cap
Bolt M6x60
2 059 Motor 1
044L Left Rear Roller Support 1 060 Pad 2
044R Right Rear Roller Support 1 061 Front Tube Frame 1
045
Hexagon Socket Countersunk
Head Bolt M6x12
8 062
Cross Recessed Pan Head Bolt
M6x40
2
046 Front Foot Pad 64x35x24 2 063 Transport Wheel 2
047
Cross Recessed Pan Head Bolt
ST4.2x20
2 064
Hexagon Socket Button Head Bolt
M8x15
2
048
Cross Recessed Truss Head
Screw ST4.2x9.5
6 065 Spring Washer M8 2
049 Lower Motor Cover 1 066 Washer M8 2
050 Rear Tube 1 067 AC Wire (L=450 mm) 1
051 Nylon Nut M5 4 068 AC Wire (L=150 mm) 2
052 Rear Foot Pad 60x40x15 2 069 AC Wire (L=150/450 mm) 1
053
Cross Recessed Pan Head Bolt
M5x30
4 070 Earth Lead (L=450 mm) 1
054L Rear Left End Cover 1 071 Ring for Cable Ø28xØ16x13 1
054R Rear Right End Cover 1 072 Foam Cover Ø35.5xØ28.2x15 1
055
Cross Recessed Pan Head
Tapping Screw ST4.8x16
4 073 Reinforcement Tube 1
056 Front Roller Ø80xØ38xØ15x555.5 1 074
Hexagon Socket Round Head Cap
Bolt M6x30
2
057 Rear Roller Ø38xØ15x566.4 1
7
COMPONENTS
TOOL
(20) Safety Tether Key
1 PC
(19) Power Cord (L=1800 mm)
1 PC
(1) Mobile Device Holder
1 Set
Allen Wrench with Phillips Screwdriver
1 PC
8
EXPLODED VIEW
1B
1A
1C
9
9
10
14
20
21
22
11
23
23
24
24
25
26
27
28
29
30
31
31
32L
33
33
34L
36
35
36
35
36
37
38L
40
41
36
37
35
42
43
44L
45
35
42
42
46
47
48
49
50
51
52
53
54L
55
54R
57
34R
32R
60
61
59
66
65
64
62
63
58
56
15
16
17
67
68
68
13
18
19
70
14
27
26
25
30
3B
3A
2A
2B
2C
2D
2
1
2C
3
4
11
2E
2F
2C
3C
51
52
53
37
35
36
37
35
60
63
62
42
35
36
35
36
37
35
36
37
40
36
37
35
36
37
41
36
37
43
45
55
39
39
46
47
11
48
48
41
36
37
41
36
37
5
6
7
44R
11
8
12
12
38R
71
72
74
36
37
74
36
37
73
9
ASSEMBLY INSTRUCTIONS
Step 1
Remove the treadmill from the carton and place it on a level flat surface. Please always
use the aid of a second person when removing the treadmill from the carton.
Step 2
Turn both Knobs (30) in a counterclockwise direction until both Left and Right Handlebar
Support Tubes (28, 29) can be lifted up.
30
28
30
28
29
30
10
10
Step 3
Lift both Left/Right Handlebar Support Tubes (28, 29) up and lock them in place by
tightening the Knobs (30) in a clockwise direction.
NOTE: Continue to turn the Knobs (30) until both Left and Right Handlebar Support
Tubes (28, 29) are secure before exercising.
30
28
30
30
29
29
28
10
NOTE: Each end of
Handlebar Support Tube
has one protruding point
which shall be placed
behind the Bolt.
Bolt
Protrude Point
Handlebar Support Tube
Knob
11
Step 4
Remove both Handlebar Knobs (26) from both Left and Right Handlebar Support Tubes
(28, 29). Push the Handlebar (10) all the way down and align the knob holes.
Lock the Handlebar (10) in place by tightening the Handlebar Knobs (26) in a clockwise
direction.
NOTE: Continue to turn both Handlebar Knobs (26) until the Handlebar (10) is
secure before exercising.
28
29
10
26
26
10
26
10
26
29
28
12
Step 5
Slide the Mobile Device Holder (1) into the slot of the Upper Computer Console (2).
Install the Power Cord (19) to the power socket of the treadmill.
Place the Safety Tether Key (20) onto the Upper Computer Console (2).
(20) Safety Tether Key
1 PC
(19) Power Cord (L=1800 mm)
1 PC
(1) Mobile Device Holder
1 Set
10
20
1
2
19
13
Step 6
The running belt has been adjusted to the running deck at the factory before it was
shipped. At times the running belt may get slippery during shipment. After the treadmill is
completely assembled, use the Allen Wrench with Phillips Screwdriver to turn the both left
and right rear roller adjustment bolts 1/4 turn clockwise before using the treadmill.
Tool:
Allen Wrench with
Phillips Screwdriver
14
STORAGE
Step 1
1-1: Remove both Handlebar Knobs (26) from both Left and Right Handlebar Support
Tubes (28, 29).
1-2: Pull the Handlebar (10) all the way up and align the knob holes.
Lock the Handlebar (10) in place by tightening the Handlebar Knobs (26) in a
clockwise direction.
1-1
1-2
28
29
26
10
26
26
10
10
26
29
28
15
Step 2
Pull out the Safety Tether Key (20) from the computer console.
Turn both Knobs (30) in a counterclockwise direction until both Left and Right Handlebar
Support Tubes (28, 29) can be pushed down.
30
30
28
28
29
30
29
10
20
16
Step 3
Push both Left/Right Handlebar Support Tubes (28, 29) down and lock them in place by
tightening the Knobs (30) in a clockwise direction.
Step 4
The treadmill can fold flat to the floor for storage under a bed.
30
28
30
28
29
30
17
ADJUSTMENT
For a secure and snug fit, pull the Mobile Device Clamp upward while placing your mobile
device in open clamps. Make sure the mobile device is securely held.
MOVING THE TREADMILL
The unit can be carefully tilted onto its Transport Wheels for easy moving and storage.
With the treadmill in the folded flat position, firmly grasp the Handlebar with both hands.
Next, carefully pull the treadmill up until it rolls freely on the Transport Wheels.
CAUTION: Do not attempt to move the treadmill while it is in the
unfolded position.
Transport Wheel
Handlebar
Mobile Device Clamp
18
OPERATING THE COMPUTER
Flip the Master Power Switch that is located at the front of the treadmill to the ON position.
Before beginning a workout session ensure that the Safety Tether Key is properly placed
onto the Computer Console and the Safety Clip is securely attached to an article of your
clothing.
NOTE: Always stand on the side rails when you start the treadmill,
never start the treadmill while you are standing on the running belt.
QUICK START:
Press the (START) button on the computer to begin exercising, the computer screen
will countdown 3 seconds before the running belt starts moving. The running belt starts
moving with an initial speed of 1.0 KPH. You may press the (SPEED UP) or
(SPEED DOWN) button on the computer console to increase or decrease the running
speed during exercise. The split window of (SPEED) will display your current running
speed from the minimum 1.0 KPH to the maximum 12.0 KPH. You may also press one of
the INSTANT SPEED buttons (6 / 9) on the computer console and the split
window of (SPEED) will display the speed that you have pressed and the running
speed will change to 6 KPH or 9 KPH respectively. The split window of (TIME) will
display your elapsed workout time in minutes and seconds. The split window of
(DISTANCE) will display the accumulative distance travelled during workout. The
split window of (CALORIES) will display the total accumulated calories burned during
workout. During workout, you may press the (STOP) button on the computer console
to stop the treadmill running at any time.
BUTTON FUNCTIONS:
(START): Press the START button to begin exercising.
(STOP): During workout, press the STOP button on the computer console to stop the
treadmill running.
(SPEED UP): To make speed upward adjustments during all training periods.
(SPEED DOWN): To make speed backward adjustments during all training periods.
INSTANT SPEED BUTTONS (6 / 9): Used to reach desired speed more quickly.
19
DISPLAY FUNCTIONS:
(TIME): Displays your elapsed workout time in minutes and seconds. .
(SPEED): Displays the current speed from the minimum 1.0 KPH to the maximum
12.0 KPH. You may increase or decrease the speed by pressing the (SPEED UP) or
(SPEED DOWN) button on the computer console.
(DISTANCE): Displays the accumulative distance travelled during workout.
(CALORIES): Displays the total calories burned during your workout.
1. You can install the Kinomap app on your mobile device using a QR code.
2. Scan the QR code to download and install the app.
To connect via Bluetooth, please go to your mobile device’s settings section and
turn on the “Bluetooth” function. After that, start to pair your mobile device to the
treadmill via Bluetooth in the Kinomap app. Make sure that Bluetooth is enabled on
your mobile device and the treadmill is within the Bluetooth connection range of
your mobile device.
NOTE: All the activity information from this app may vary from the
computer; user can choose either one of them to help you get the best
results.
Bluetooth
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26

LifeGear 97512 Owner's manual

LifeGear
Brand
LifeGear
Model
97512
Category
Fitness, gymnastics & weight training
Type
Owner's manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents