About the print function
•
Do one of the following settings to print with AirPrint.
• Set printer job authentication to [Simple (All)].
• Disable the user authentication function.
• Enable the user authentication function, and then in the IPP authentication settings, set the
[User Authentication Function of Main Unit] to [On].
• When printing with AirPrint, your machine cannot accept multiple jobs simultaneously. Wait
for the preceding job to finish before printing the next one.
• If you cancel a job while it is printing, the main text may continue printing if that job has a
cover sheet.
• You may not be able to use the printing functions depending on the application.
• When printing odd pages, the last page may be counted as black and white depending on
the application and the operation system.
About the scanner function
• Even if [Not Available] is selected in [Use a Destination List that is not DSM], you can scan
documents with AirPrint.
The [Use a Destination List that is not DSM] settings appear in a different menu according to
the screen type.
Standard: [Scanner Settings], [Others], [WSD/DSM Settings]
Classic: [General Settings] under [Scanner Features]
• When scanning is performed with AirPrint, the following settings are enabled. The settings
name varies according to the screen type.
Standard:
• Compression (Black & White): On
• Compression Method (Black & White): MMR
• Compression (Gray Scale/Full Color): On
Settings in [Sending Settings] under [Scanner Settings] on the machine are not applied.
Classic:
• Compression (Black & White): On
• Compression Method (Black & White): MMR
• Compression (Gray Scale / Full Color): On
Settings in [Send Settings] under [Scanner Features] on the machine are not applied.
• You cannot use the scanner function if the user authentication management function is used to
restrict the use of functions.
1. How to Use AirPrint
8