Blade PulsePak User manual

Brand: Blade

Model: PulsePak

Type: User manual

GETTING STARTED

WARNING: Before using this product, read this manual for important safety

and health informaon.

Required Items:

- A compable device such as a cellular phone, camera, or electronic accessory

- A micro-USB cable for recharging PulsePak

Aaching PulsePak to Your Phone:

Insert PulsePak’s Power Output Plug into your phone’s charging port. PulsePak

will automacally begin charging your phone. Gently press the Retractable

Switch and slide the switch backward to retract the Power Output Plug for safe

storage. Recharge PulsePak’s internal baery by connecng a micro USB cable

to the Micro USB Power Input.

Note: For opmal results, exit all apps running in the background and turn oﬀ

power draining features such as GPS, Bluetooth, Wiﬁ, etc.

LED Indicators:

Red Light - PulsePak’s internal baery is recharging.

Green Light - PulsePak’s internal baery has been fully charged.

CLEANING

Before cleaning, disconnect all cables and remove PulsePak from any external

devices.

• Use a so, lint-free cloth.

• Avoid geng moisture in openings.

• Don’t use cleaning products

IMPORTANT HEALTH AND SAFETY WARNINGS

WARNING: Failure to follow these safety instrucons could result in ﬁre,

electric shock, or other injuries, or damage to your phone or other property.

Read all safety informaon below before using PulsePak.

CHOKING HAZARD: Contains small parts. Not for Children under 3 years.

May contain sharp edges.

Operaonal Temperature Warning:

PulsePak is designed to operate and be stored in ambient temperatures

between 32° and 95° F (0° and 35° C). Do not expose PulsePak to extreme

temperatures, including heat caused by intense sunlight; it can be damaged

and baery life shortened if stored or operated outside of these temperatures.

Avoid exposing PulsePak to dramac changes in temperature or humidity. If the

temperature of PulsePak exceeds normal operang temperatures, it may not

funcon properly and may result in permanent damage. If PulsePak or your

mobile device is excessively hot, is eming odor, is deformed, abraded, cut, or

is experiencing or demonstrang an abnormal phenomenon stop using the

aﬀected device(s) immediately and contact the manufacturer. This product

contains chemicals that are known to the state of California to cause cancer

and birth defects or other reproducve harm.

PROPER CARE FOR YOUR PRODUCT

Be sure that PulsePak is securely connected to your device during use. If

PulsePak is not securely connected, it could result in damage to your phone.

Blade Electronics assumes no responsibility for any damage caused to devices

used with PulsePak.

PulsePak has an internal, lithium-ion rechargeable baery. Rechargeable

baeries have a limited number of charge cycles and may eventually need to

be replaced and disposed of.

PulsePak has sensive electronic components inside and should be handled

with care. PulsePak can be damaged if dropped, burned, punctured, crushed,

or if it comes in contact with liquid. Don’t use a damaged PulsePak, as it may

cause injury.

Never force a connector into a port or apply excessive pressure to a buon,

because this may cause damage that is not covered under the warranty. Do

not open, take apart, modify, or repair PulsePak in any way. Disassembling

PulsePak may cause injury to you or damage to PulsePak and it will void your

warranty. Don’t aempt to replace the PulsePak baery yourself—you may

damage the baery, which could cause overheang and injury. Do not

incinerate the baery.

If this baery is intended to be used by a minor, the purchasing adult agrees to

provide detailed instrucons and warnings to any minor prior to use. Failure to

do so is sole responsibility of the purchaser, who agrees to indemnify Blade

Electronics for any unintended use/misuse by a minor.

DISPOSAL AND RECYCLING

You must dispose of PulsePak properly according to local laws and regulaons.

PulsePak contains electronic components and a baery and, therefore, must be

disposed of separately from household waste. Contact local authories to

learn about disposal and recycling opons.

WARRANTY INFORMATION

PulsePak has a one year limited warranty. For detailed informaon, visit

www.Blade-Electronics.com/warranty

BLADE ELECTRONICS SUPPORT

Comprehensive support informaon is available online at www.Blade-Electron-

ics.com/contact

logo are registered trademarks of Blade Electronics LLC. All other logos and

trademarks are property of their respecve owners. Patents Pending. Menon

of third-party products is for informaonal purposes only. Blade Electronics

assumes no responsibility in regard to the performance or use of these

products. All agreements or warranes, if any, take place directly between the

vendors and the prospecve users. Every eﬀort has been made to ensure that

the informaon in this manual is accurate. Blade Electronics is not responsible

for prinng or clerical errors.

2.0/2014-12

This device complies with part 15 of the FCC rules. Operaon is subject to the

following two condions: (1) This device may not cause harmful interference,

and (2) this device must accept any interference received, including

interference that may cause undesired operaon. NOTE: This equipment has

been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protecon against harmful interference in a residenal installaon.

This equipment generates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instrucons, may cause harmful

interference to radio communicaons. However, there is no guarantee that

interference will not occur in a parcular installaon. If this equipment does

cause harmful interference to radio or television recepon, which can be

determined by turning the equipment oﬀ and on, the user is encouraged to try

to correct the interference by one or more of the following measures:

—Reorient or relocate the receiving antenna. —Increase the separaon

between the equipment and receiver.—Connect the equipment into an outlet

on a circuit diﬀerent from that to which the receiver is connected. —Consult

the dealer or an experienced radio/TV technician for help.

User Guide

TOP BOTTOM

Power Output Plug

(micro USB for Android or

Lightning for iPhone)

LED Indicator

Key Ring HoleRetractable Switch for

Power Output Plug

Micro USB Power Input