3-9-31, Himesato, Nishiyodogawa-ku, Osaka 555-0025, Japan
No part of this document may be copied or reproduced in any form by any means
without prior written consent of CONTEC CO., LTD.
NA06299 (LYWD613) 11022018_rev3[07042018] November 2018 Edition
AC-DC Power Adaptor (5VDC, 3A)
FX-AC053
Thank you for purchasing this product. The product you have purchased consists of the
following items.
Check, with the following list, that your package is complete.
If you find any item either missing or damaged, please contact the sales representative you
purchased the product from.
1. About the Unit
This product is the AC adapter for input: 100 - 240VAC and output: +5VDC 3A.
2. Product Configuration
This product consists of the items listed below.
Check, with the following list, that your package is complete. If you discover damaged or
missing items, contact your retailer.
3. Safety Precautions
Understand the following definitions and precautions to use the product safely.
Safety Information
This document provides safety information using the following symbols to prevent acci-
dents resulting in injury or death and the destruction of equipment and resources. Under-
stand the meanings of these labels to operate the equipment safely.
DANGER
DANGER indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING
WARNING indicates a potentially hazardous situation
which, if not avoided, could result in death or serious in-
jur y.
CAUTION
CAUTION indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate in-
jury or in property damage.
Handling Precautions
DANGER
Do not use the product where it is exposed to flammable or corrosive gas. Doing so
may result in an explosion, fire, electric shock, or failure.
CAUTION
This product must not be used in locations subject to physical shock or strong vibration.
Otherwise, the board may malfunction, overheat, or cause a failure.
Do not use or store this device in high temperature or low temperature surroundings, or
do not expose it to extreme temperature changes. Otherwise, the board may malfunction,
overheat, or cause a failure.
Do not use or store this device where it is exposed to direct sunlight or near stoves or
other sources of heat. Otherwise, the board may malfunction, overheat, or cause a fail-
ure.
Do not use or store this device near strong magnetic fields or devices emitting electro-
magnetic radiation. Otherwise, the board may malfunction, overheat, or cause a failure.
If an unusual smell or overheat is noticed, unplug a wall outlet immediately.
Do not block it up around this product on top of this product or on its sides.
The specifications of this product are subject to change without notice for enhancement
and quality improvement. Even when using the product continuously, be sure to read
the manual and understand the contents.
Do not attempt to modify this device. The manufacturer will bear no responsibility
whatsoever for the device if it has been modified.
Do not rotate or vibrate the DC plug from this product to an apparatus after power supply.
Do not modify this product. CONTEC will bear no responsibility for any problems, etc.,
resulting from modifying this product.
Regardless of the foregoing statements, CONTEC is not liable for any damages whatso-
ever (including damages for loss of business profits) arising out of the use or inability to
use this CONTEC product or the information contained herein.
Storage / Disposal
When storing this product, keep it in its original packing form.
When disposing of the product, follow the disposal procedures stipulated under the rele-
vant laws and municipal ordinances.
4. Dimensions
5. Specifications
Parameter Requirement description
Input voltage range *1 100 - 240VAC 50Hz/60Hz
Rated input current AC480mA (Max.)
Frequency 50 - 60Hz
Rated output voltage 5.0VDC±6% (at the time of 0A - 3.0A)
Rated output current 3.0A (Max.)
Output hold time 19ms (typ) (at the time of 2.0A), 10ms (typ) (at the time of 3.0A)
Operating temperature 0 - 40°C
Storage temperature 20 - 80%RH (No condensation)
Life expectancy
2.39 years at the ambient temperature 40°C (When 100VAC is input
and 3.0A is output)
6.04 years at the ambient temperature 40°C (When 100VAC is input
Floating dust particles Not to be excessive
Corrosive gases None
50(W) x 88.5(D) x 34(H) (Not including the cable and protrusions)
Weight 170g
Standard PSE
*1 The bundled AC cable is for 125VAC.
At the time of the use in Japan, become 100-125V.
1
Contec RRY-16CX-USB Owner's manual