American Standard 6147SM111.002 Specification

  • Hello! I am an AI chatbot trained to assist you with the American Standard 6147SM111.002 Specification. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the model number of the flush valve?
    What is the operating pressure range of the flush valve?
    What is the flow requirement for the flush valve?
    What is the battery life of the flush valve?
    What is the adjustable range of the flush valve?
    What are the general features of the flush valve?
    What are the roughing-in dimensions for the flush valve?
    What listings and certifications does the flush valve have?
© 2019 AS America Inc.
11/19
MODEL NUMBER:
6147SM111.002 Flush Valve for 1-1/2" top spud bowl,
11-1/2" Supply C\L to top of bowl, 1.1 gpf/4.2 Lpf
OPERATING PRESSURE:
25 psi (owing)-80 psi (static)
FLOW REQUIREMENT:
25gpm (94.6 L/min.)
BAT TERY LIFE:
100,000 ushes (3+ years @ 3,000 ushes per month)
(4) “C” alkaline batteries included
ADJUSTABLE RANGE:
8" to 48" (32" default)
RECOMMENDED SPECIFICATION:
Toilet flush valve includes sensor-operated gear actuator with metal casing. Shall feature self-cleaning diaphragm valve with integral
DynaClean wiper spring in bypass orifice to prevent clogging. Advanced EvoLast diaphragm provides superior chorine-resistance.
Includes dezincification-resistant cast brass valve body with chrome finish. Includes sweat solder kit with wall flange and cover tube.
Angle stop with back-flow protection and vandal-resistant stop cap. High back pressure vacuum breaker included. 1.1 gpf / 4.2 Lpf Flush
valve shall be American Standard Model # 6147SM.111.002
Ultima
Sensor-Operated Toilet Flush Valve
Diaphragm-Type
1.1 GPF / 4.2 LPF
FINISHED WALL
FINISHED
FLOOR
57 mm Min.
(2-1/4")
371 mm
(14-5/8")
TYPICAL WATER CLOSET INSTALLATION:
AFWALL
TOILET SHOWN
292 mm
(11-1/2")
-C-L-
SEE ROUGH-IN
ABOVE
CRITICAL
LEVEL
108 mm, +/-13 mm
(4-3/4")(+/-1/2")
SUPPLY
DN 25 mm
(1" I.P.S.)
User In View Indicator (Green
LED ashes 3 times after user is
detected for 5 seconds)
Low Battery
(Yellow LED)
Object Detection
Courtesy Flush Button
GENERAL DESCRIPTION:
Diaphragm-Type Water Closet Flush Valve for
oor-mounted or wall-hung 1-1/2" top spud bowls.
PRODUCT FEATURES:
Hands-free infrared sensor-operated gear actuator
with chrome plated metal housing
Angled sensor delivers reliable ush even with toilet
seat in raised position
Patent-pending DynaClean
wiper spring technology
signicantly reduces maintenance and downtime
Self-cleaning wiper spring cleans the rell orice with
every ush; prevents valve run-on from clogging
Prevents costly excess water usage and potential
ooding
Premium EvoLast
material is chlorine and chloramine
resistant to prevent premature deterioration and failure
Dezincication-resistant brass alloy
Electronic courtesy ush button
Optional Sanitary Flush: Automatic ush after 24 hours
of non-use
Low Battery Indicator: Yellow LED ashes when
batteries need to be replaced
Easy Battery Replacement: Water does not need to be
shut off to change batteries
High back pressure vacuum breaker prevents dripping
Adjustable tailpiece for rough-in exibility
Can be installed left or right handed
No external volume adjustment
ADA compliant
© 2019 AS America Inc.
11/19
LISTINGS:
• ASSE 1037
• ANSI/ASME A112.19.2
• ADA Compliant
Ultima
Sensor-Operated Toilet Flush Valve
Diaphragm-Type
1.1 GPF / 4.2 LPF
Roughing-in Dimensions
Left or Right Hand Installation
*Note: The Critical Line (-C-L-) on Vacuum Breaker
must typically be a minimum of 6
" (152 mm) above
fixture. Consult Codes for details.
FOR 1-1/2" TOP
SPUD FIXTURES
-C-L-
*CRITICAL
LEVEL
SUPPLY
DN 25 mm
(1" I.P.S.)
108-133 mm
(4-1/4" to 5-1/4")
FINISHED WALL
371 mm
(14-5/8")
38mm-127mm
(1-1/2-5")
152 mm
(6
")
(Min.)
292 mm
(11-1/2")
147 mm
(5-13/16")
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES
AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND
USABLE BUILDING FACILITIES-CHECK LOCAL CODES
INCLUDES:
1" I.P.S. angle stop with back-ow prevention and
vandal-resistant cap
• Sweat solder kit including cover tube and wall ange
• High back pressure vacuum breaker with down tube
• Spud coupling & ange for 1-1/2" top spud
/