American Standard 6147SM111.002 Specification

Category
Sanitary ware
Type
Specification

American Standard 6147SM111.002 is a sensor-operated toilet flush valve designed for hands-free flushing. It features a self-cleaning diaphragm valve with DynaClean wiper spring to prevent clogging, and an angled sensor for reliable flushing even with the toilet seat up. The valve has a flow rate of 1.1 GPF/4.2 LPF and is ADA compliant. It also includes a courtesy flush button and an optional sanitary flush that automatically flushes after 24 hours of non-use. The valve is easy to install and can be used with either 1-1/2" top spud bowls or wall-hung bowls.

American Standard 6147SM111.002 is a sensor-operated toilet flush valve designed for hands-free flushing. It features a self-cleaning diaphragm valve with DynaClean wiper spring to prevent clogging, and an angled sensor for reliable flushing even with the toilet seat up. The valve has a flow rate of 1.1 GPF/4.2 LPF and is ADA compliant. It also includes a courtesy flush button and an optional sanitary flush that automatically flushes after 24 hours of non-use. The valve is easy to install and can be used with either 1-1/2" top spud bowls or wall-hung bowls.

© 2019 AS America Inc.
11/19
MODEL NUMBER:
6147SM111.002 Flush Valve for 1-1/2" top spud bowl,
11-1/2" Supply C\L to top of bowl, 1.1 gpf/4.2 Lpf
OPERATING PRESSURE:
25 psi (owing)-80 psi (static)
FLOW REQUIREMENT:
25gpm (94.6 L/min.)
BAT TERY LIFE:
100,000 ushes (3+ years @ 3,000 ushes per month)
(4) “C” alkaline batteries included
ADJUSTABLE RANGE:
8" to 48" (32" default)
RECOMMENDED SPECIFICATION:
Toilet flush valve includes sensor-operated gear actuator with metal casing. Shall feature self-cleaning diaphragm valve with integral
DynaClean wiper spring in bypass orifice to prevent clogging. Advanced EvoLast diaphragm provides superior chorine-resistance.
Includes dezincification-resistant cast brass valve body with chrome finish. Includes sweat solder kit with wall flange and cover tube.
Angle stop with back-flow protection and vandal-resistant stop cap. High back pressure vacuum breaker included. 1.1 gpf / 4.2 Lpf Flush
valve shall be American Standard Model # 6147SM.111.002
Ultima
Sensor-Operated Toilet Flush Valve
Diaphragm-Type
1.1 GPF / 4.2 LPF
FINISHED WALL
FINISHED
FLOOR
57 mm Min.
(2-1/4")
371 mm
(14-5/8")
TYPICAL WATER CLOSET INSTALLATION:
AFWALL
TOILET SHOWN
292 mm
(11-1/2")
-C-L-
SEE ROUGH-IN
ABOVE
CRITICAL
LEVEL
108 mm, +/-13 mm
(4-3/4")(+/-1/2")
SUPPLY
DN 25 mm
(1" I.P.S.)
User In View Indicator (Green
LED ashes 3 times after user is
detected for 5 seconds)
Low Battery
(Yellow LED)
Object Detection
Courtesy Flush Button
GENERAL DESCRIPTION:
Diaphragm-Type Water Closet Flush Valve for
oor-mounted or wall-hung 1-1/2" top spud bowls.
PRODUCT FEATURES:
Hands-free infrared sensor-operated gear actuator
with chrome plated metal housing
Angled sensor delivers reliable ush even with toilet
seat in raised position
Patent-pending DynaClean
wiper spring technology
signicantly reduces maintenance and downtime
Self-cleaning wiper spring cleans the rell orice with
every ush; prevents valve run-on from clogging
Prevents costly excess water usage and potential
ooding
Premium EvoLast
material is chlorine and chloramine
resistant to prevent premature deterioration and failure
Dezincication-resistant brass alloy
Electronic courtesy ush button
Optional Sanitary Flush: Automatic ush after 24 hours
of non-use
Low Battery Indicator: Yellow LED ashes when
batteries need to be replaced
Easy Battery Replacement: Water does not need to be
shut off to change batteries
High back pressure vacuum breaker prevents dripping
Adjustable tailpiece for rough-in exibility
Can be installed left or right handed
No external volume adjustment
ADA compliant
© 2019 AS America Inc.
11/19
LISTINGS:
• ASSE 1037
• ANSI/ASME A112.19.2
• ADA Compliant
Ultima
Sensor-Operated Toilet Flush Valve
Diaphragm-Type
1.1 GPF / 4.2 LPF
Roughing-in Dimensions
Left or Right Hand Installation
*Note: The Critical Line (-C-L-) on Vacuum Breaker
must typically be a minimum of 6
" (152 mm) above
fixture. Consult Codes for details.
FOR 1-1/2" TOP
SPUD FIXTURES
-C-L-
*CRITICAL
LEVEL
SUPPLY
DN 25 mm
(1" I.P.S.)
108-133 mm
(4-1/4" to 5-1/4")
FINISHED WALL
371 mm
(14-5/8")
38mm-127mm
(1-1/2-5")
152 mm
(6
")
(Min.)
292 mm
(11-1/2")
147 mm
(5-13/16")
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES
AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND
USABLE BUILDING FACILITIES-CHECK LOCAL CODES
INCLUDES:
1" I.P.S. angle stop with back-ow prevention and
vandal-resistant cap
• Sweat solder kit including cover tube and wall ange
• High back pressure vacuum breaker with down tube
• Spud coupling & ange for 1-1/2" top spud
  • Page 1 1
  • Page 2 2

American Standard 6147SM111.002 Specification

Category
Sanitary ware
Type
Specification

American Standard 6147SM111.002 is a sensor-operated toilet flush valve designed for hands-free flushing. It features a self-cleaning diaphragm valve with DynaClean wiper spring to prevent clogging, and an angled sensor for reliable flushing even with the toilet seat up. The valve has a flow rate of 1.1 GPF/4.2 LPF and is ADA compliant. It also includes a courtesy flush button and an optional sanitary flush that automatically flushes after 24 hours of non-use. The valve is easy to install and can be used with either 1-1/2" top spud bowls or wall-hung bowls.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI