Use and Care Manual
1. TO CLEAN YOUR TABLE’S FELT, BEGIN WITH A BRUSH.
1.1. First, begin in the center and brush out to the edges, then begin at
one end and work towards the other end. Use light strokes to avoid
stretching the cloth.
2. THE NEXT STEP IS TO VACUUM THE FELT.
2.1. Use a vacuum cleaner with light suction that has an upholstery tool
and a crevice tool. Vacuum the main expanse of the table with the
upholstery tool to pull out all the remaining dirt and chalk, and then use
the crevice tool to clean under the rails. Lastly, vacuum the pockets to
remove any debris that has collected there.
3. ANY LIQUIDS THAT ARE SPILLED ON THE FELT SHOULD BE CLEANED
IMMEDIATELY.
3.1. Use a clean damp cloth to blot, not rub, the stain. Once the stain has
been absorbed, use a dry cloth to blot any remaining dampness out of the
felt.
4. FOR MORE STUBBORN STAINS, OR FOR OCCASIONAL DEEP CLEANING, YOU CAN
USE A PRODUCT THAT IS SPECIFICALLY MADE TO CLEAN POOL TABLES.
4.1. This is typically a foam cleaner that you spray on the table and allow
to dry. Follow the label instructions for the best results.