Kimberly-Clark PROFESSIONAL KCC09989 User manual

Brand: Kimberly-Clark PROFESSIONAL

Model: KCC09989

Type: User manual

Kimberly-Clark PROFESSIONAL KCC09989 is a Roll Control Center-Pull System designed for easy and efficient dispensing of towels in various settings. Its key features include:

Controlled Dispensing: The system ensures controlled dispensing of towels, preventing wastage and promoting hygiene.
Push-Button or Key Operation: Users can choose between push-button or key operation for added convenience and security.
Adjustable Base Plate: The adjustable base plate allows for compatibility with different towel brands and roll sizes, ensuring versatility.
Ergonomic Design: The dispenser is designed to be easy to use, with a pull-to-dispense mechanism that minimizes effort and strain.

Kimberly-Clark PROFESSIONAL KCC09989 is a Roll Control Center-Pull System designed for easy and efficient dispensing of towels in various settings. Its key features include:

Controlled Dispensing: The system ensures controlled dispensing of towels, preventing wastage and promoting hygiene.
Push-Button or Key Operation: Users can choose between push-button or key operation for added convenience and security.
Adjustable Base Plate: The adjustable base plate allows for compatibility with different towel brands and roll sizes, ensuring versatility.
Ergonomic Design: The dispenser is designed to be easy to use, with a pull-to-dispense mechanism that minimizes effort and strain.

>24"

56"

5 6 7 8

2 3 4

Contents:

a.Dispenser

b.4 inside plates (1x green installed and

3 x in plastic bag)

c.

ack of 4 fixing screws and wall plugs



Metal pronged key push button moulding

d.1 pack of decorator strips if installing

WINDOWS

Roll Control Dispenser

#09337 (#772668)

If using SCOTT

1032 Roll Control Towels

use the pre-fitted GREEN base plate.

Go to Step 6.

If using WYPALL

Wipers or other

Kimberly-Clark Towel Products remove the

GREEN plate by rotating and lifting. Insert

CORRECT plate by locating the lugs and

rotating to align center marks on the upper

face. Go to Step 6.

Keep the enclosed plates you may need them

in the future.

1 Blue — Asia

3 Yellow — N. America

4 Purple — S. Africa

5 Gray — Australia

(1)Hold dispenser firmly and squarely on wall

(2)Mark position of base of dispenser (not less

than 56" from floor)

(3)Allow at least 24" clearance above a

worktop for dispensing.

(1)Check that dispenser is vertical

(2)Open dispenser door and mark wall

through 4 rear mounting holes.

(3)

Drill 4 holes and insert the wall plugs.

(4)

Using base marks as a guide, replace

dispenser and fix to wall with the screws.

Pull towel straight down.

Pulling at an angle will cause ripping.

Grip towel as low as possible to avoid taking

two towels at once. Pull at least 10 sheets to

ensure the dispenser runs smoothly.

To re-load follow Steps 6, 7 and 8. Use only

Kimberly-Clark Professional products for

ROLL CONTROL SYSTEM with the correct

color base plate - see Step 5.

REMEMBER ALWAYS GRIP LOW ON THE

OWEL AND ALWAYS PULL STRAIGHT

DOWN.

Put the towel in the dispenser. Check that the

pulled-out towel length is hanging clear in the

base slots. Firmly close the door to click shut.

Remove core from roll.

Pull out a short length of the wiper.

® Registered Trademark of Kimberly-Clark Worldwide, Inc.

For optimal product dispensing, mount dispenser base no

less than 56" from floor and pull towel straight down.

Dispenser can be opened by

(a) key or

(b) push button

If key operation — Go to Step 3.

If push-button:

(1) Place dispenser on its back

(2) Unlock and fully open the door

(3) Remove the decorator button by

raising the lock spring (do not

over-bend spring) and push out

with small screwdriver.

(4) Slip the push button moulding

into place behind the lock

spring. Push button must

protrude through the hole in

the dispenser side.

(5) Check operation of the push

utton. Keep the key for

possible future use.

Roll Control Center-Pull System

Mounting and Loading Instructions

Kimberly-Clark PROFESSIONAL KCC09989 User manual

Brand: Kimberly-Clark PROFESSIONAL

Model: KCC09989

Type: User manual

Kimberly-Clark PROFESSIONAL KCC09989 is a Roll Control Center-Pull System designed for easy and efficient dispensing of towels in various settings. Its key features include:

Controlled Dispensing: The system ensures controlled dispensing of towels, preventing wastage and promoting hygiene.
Push-Button or Key Operation: Users can choose between push-button or key operation for added convenience and security.
Adjustable Base Plate: The adjustable base plate allows for compatibility with different towel brands and roll sizes, ensuring versatility.
Ergonomic Design: The dispenser is designed to be easy to use, with a pull-to-dispense mechanism that minimizes effort and strain.

Download PDF

report

Kimberly-Clark PROFESSIONAL KCC09989 User manual

Kimberly-Clark PROFESSIONAL KCC09989 User manual

Other documents