ANZZI SW-AZ007WH Installation guide

ANZZI
Brand
ANZZI
Model
SW-AZ007WH
Type
Installation guide

This manual is also suitable for

ANZZI SW-AZ007WH is a wall panel system designed for use in showers. It is made of durable materials and is easy to install. The system includes two wall panels that can be joined together to create a custom-sized shower enclosure. The panels are also adjustable in height, so they can be used to fit any shower space. The ANZZI SW-AZ007WH is a great choice for anyone who is looking for a high-quality, easy-to-install shower enclosure. Here are some of the features and benefits of the ANZZI SW-AZ007WH:

  • Durable construction: The ANZZI SW-AZ007WH is made of high-quality materials that are designed to withstand the rigors of everyday use. The panels are resistant to scratches, dents, and fading, and they are also easy to clean.

ANZZI SW-AZ007WH is a wall panel system designed for use in showers. It is made of durable materials and is easy to install. The system includes two wall panels that can be joined together to create a custom-sized shower enclosure. The panels are also adjustable in height, so they can be used to fit any shower space. The ANZZI SW-AZ007WH is a great choice for anyone who is looking for a high-quality, easy-to-install shower enclosure. Here are some of the features and benefits of the ANZZI SW-AZ007WH:

  • Durable construction: The ANZZI SW-AZ007WH is made of high-quality materials that are designed to withstand the rigors of everyday use. The panels are resistant to scratches, dents, and fading, and they are also easy to clean.
WALL PANELS INSTALLATION & CARE GUIDE
1
Have questions? Visit us at www.ANZZI.com or call us at 1-844-44-ANZZI.
SW-AZ006WH
SW-AZ007WH
2
Preparation
1. Prior to installation, examine all boxes and packages for shipping damage and
compare the piece count with your packing slip. After opening all boxes and
packages, read this introduction carefully. Check that all of the needed parts are
included in the package by checking offthe components on the "Detailed Diagram
of Shower DoorComponents". If the unit has been damaged, has a finishing d
efect,
or has missing parts, please contact our customer support department within 5
business days of the delivery date. Please note that
we will not replace any
damaged products or missing parts free of charge after 10business days or if the
product has been installed.
2. Install all of the required plumbing and drainage before installing the
Wall panels
.Use a competent and licensed ( if required by local code) plumber
for all plumbinginstallation.
3. Wall panels must be installed by a licensed plumber. Please note that you
should consult your local building codes with questions on installation compliance
standards. Building and plumbing codes may vary by location, and we are not
responsible for code compliance standards for your project.
4. Please insure that prior to the installation the installation wall is leveled and the
stud is strong enough .
IMPORTANT NOTE:Dimensions provided are for reference
only. You must measure the actual wall panels sizes
before installation, this includes overalldimensions and
stud / drywall / shower base sizes.
WALL PANELS SIZE
MODEL
SPECIFICATION
D(in) W(in) H(in)
36"X36"X74" 36" 36" 74"
SW-AZ006WH
MODEL
SPECIFICATION
D(in) W(in) H(in)
38"X38"X75" 38" 38" 75"
SW-AZ007WH
D
W
H
D
W
H
3
Wall Panels Installation-Preparation
1. Install the 2 wall panels and seal strip together.Secure the 2walls with
wing nut kit.add silicone at the junction of the 2 wall panels.
See Fig. 1 for details
2.Place the wall panels on the base ,drill holes through the bottom of
the wall into the base with a DIM 1/8”(3mm) drill bit and secure with
screw.
See Fig. 2 for details
Fig. 1
Fig. 2
Screw
ST4x15mm
10+2
Wing nut kit
6+2
4
3. Make sure the studs and drywall size is fix the wall panels.
See Fig. 3 for details
4.Place the wall panels and the base on the wall and level it.
See Fig. 4 for details
Fig. 3
Fig. 4
5
5. Refer to the section for finished install .
See Fig. 5 for details
6. Use silicone to fill the gap between wall panels and base.
See Fig. 6 for details
Fig. 5
Fig. 6
Base
Wall panel
Drywall
Stud
Silicone
24 Hours
Wait 24 hours before
using the shower
6
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

ANZZI SW-AZ007WH Installation guide

ANZZI
Brand
ANZZI
Model
SW-AZ007WH
Type
Installation guide
This manual is also suitable for

ANZZI SW-AZ007WH is a wall panel system designed for use in showers. It is made of durable materials and is easy to install. The system includes two wall panels that can be joined together to create a custom-sized shower enclosure. The panels are also adjustable in height, so they can be used to fit any shower space. The ANZZI SW-AZ007WH is a great choice for anyone who is looking for a high-quality, easy-to-install shower enclosure. Here are some of the features and benefits of the ANZZI SW-AZ007WH:

  • Durable construction: The ANZZI SW-AZ007WH is made of high-quality materials that are designed to withstand the rigors of everyday use. The panels are resistant to scratches, dents, and fading, and they are also easy to clean.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents