Subaru 2020 Outback Quick start guide

Type
Quick start guide

This manual is also suitable for

MSA5B2013A
Issued October 2019
Printed in USA 10/19
EyeSight
®
is a driver assist system that may not operate optimally under all
driving conditions. The driver is always responsible for safe and attentive driving.
System effectiveness depends on many factors such as vehicle maintenance, tire
condition, and weather and road conditions. See the EyeSight
®
Owner’s Manual
for complete details on system operation and limitations.
All information contained within this EyeSight
®
guide was accurate at the time of
publication. Subaru of America, Inc. reserves the right to change features, operation
and/or functionality of any vehicle specication at any time without incurring any
obligation to make the same or similar changes to products previously sold. Your
Subaru Retailer is the best source for the most current information. For detailed
operating and safety information, always consult the Owner’s Manual.
Love. It’s what makes a Subaru, a Subaru.
Quick Guide
2020
LEGACY
OUTBACK
FORESTER
© 2019 Subaru of America, Inc. All rights reserved.
Contents may not be reproduced in whole or in part without prior written permission of
publisher. Specications in this Guide are based on the latest product information available
at the time of publication. Some images shown are for illustration purposes only. Some
equipment shown in photography within this Guide is optional at extra cost. Specic
options may be available only in combination with other options. Specic combinations
of equipment or features may vary from time to time, and by geographic area. Subaru
of America, Inc. reserves the right to change or discontinue at any time, without notice:
Prices, colors, materials, equipment, accessories, specications, models and packages,
without incurring any obligation to make the same or similar changes on vehicles
previously sold. Colors shown may vary due to reproduction and printing processes.
Subaru of America, Inc. is not responsible for typographical errors.
Aha
is a trademark of Harman International Industries, Inc. Alcantara
®
is a registered
trademark of Alcantara S.p.A., and Alcantara is produced by the Toray Group. App Store
®
is a registered trademark of Apple, Inc. Apple
®
is a registered trademark of Apple, Inc.
BBS
®
is a registered trademark of BBS Kraftahrzeugtechnik, AG. Bluetooth
®
is a registered
trademark of Bluetooth SIG, Inc. Brembo
®
is a registered trademark of Freni Brembo, S.p.A.
GreenEdge
®
is a registered trademark of Harman International Industries, Inc. Harman
Kardon
®
is a registered trademark of Harman International Industries, Inc. HD Radio
®
is a
registered trademark of iBiquity Digital Corporation. HomeLink
®
is a registered trademark
of Prince Corporation, a wholly owned subsidiary of Johnson Controls. iHeart
®
Radio
is a registered trademark of iHeartMedia, Inc. iPod
®
is a registered trademark of Apple,
Inc. iTunes
®
is a registered trademark of Apple, Inc. Metal-Matrix Diaphragm (MMD
®
) is a
registered trademark of Harman International Industries, Inc. MirrorLink
is a trademark of
Car Connectivity Consortium, LLC. Pandora
®
is a registered trademark of Pandora Media,
Inc. Siri
®
is a registered trademark of Apple, Inc. Smart Way
®
is a registered trademark
of the U.S. Environmental Protection Agency. Stitcher
is a trademark of Stitcher
, Inc.
TORSEN LSD
®
is a registered trademark of JTEKT TORSEN North America, Inc. SiriusXM
®
All Access Radio is a registered trademark of SiriusXM Radio, Inc. SiriusXM Trafc
®
and
SiriusXM Travel Link
®
are registered trademarks of SiriusXM Radio, Inc. Added Security,
Crosstrek, Forester and Outback are registered trademarks of Subaru of America, Inc.
Ascent, DriverFocus and StarTex are trademarks of Subaru of America, Inc. BRZ, EyeSight,
Impreza, Lineartronic, Legacy, Subaru, SUBARU BOXER, Starlink, Subaru Starlink, WRX,
STI and X-MODE are registered trademarks of Subaru Corporation. Condence in Motion is
a trademark of Subaru Corporation.
PURPOSE OF THIS GUIDE
3 FORWARD
3 IMPORTANT SAFETY INFORMATION
3 ADDITIONAL RESOURCES
EYESIGHT
®
4 OVERVIEW
4 OPERATION
5 FUNCTIONS
12 STEERING WHEEL CONTROLS
13 EYESIGHT ASSIST MONITOR (EAM) (Outback/Legacy)
14 LANE DEPARTURE WARNING AND PRE-COLLISION
BRAKING SYSTEM OFF SWITCHES
DRIVER ASSIST TECHNOLOGIES
16 REAR-VISION CAMERA
16 FRONT VIEW MONITOR
16 BLIND-SPOT DETECTION (BSD)/ REAR CROSS-
TRAFFIC ALERT (RCTA)
18 HIGH BEAM ASSIST (HBA)
18 STEERING RESPONSIVE HEADLIGHTS (SRH)
18 REVERSE AUTOMATIC BRAKING (RAB)
TABLE OF CONTENTS
DRIVERFOCUS DISTRACTION MITIGATION SYSTEM
20 DRIVERFOCUS OVERVIEW
20 DRIVERFOCUS COMPONENTS FORESTER
23 DRIVERFOCUS COMPONENTS OUTBACK/LEGACY
25 DROWSY/INATTENTIVE WARNINGS
25 CONVENIENCE SETTINGS FORESTER
27 CONVENIENCE SETTINGS OUTBACK/LEGACY
CARE AND LIMITATIONS
30 STEREO CAMERA PRECAUTIONS
30 WINDSHIELD GLASS AND DASHBOARD
FRONT VIEW
31 FORESTER (FRONT VIEW)
31 OUTBACK/LEGACY (FRONT VIEW)
DISCLAIMER
33 Index
TABLE OF CONTENTS
2
FORWARD
Congratulations on choosing a Subaru vehicle! This Quick Guide is designed to provide
information on the basic operation and key features of the EyeSight
®
and Driver Assist
Systems on your Subaru vehicle.
IMPORTANT SAFETY INFORMATION
The Quick Guide is not intended as a substitute for the EyeSight
®
Owner’s Manual. Some
of the features and functions covered in this guide may vary by model and trim level. We
strongly encourage you to review the entire EyeSight
®
Owner’s Manual to ensure complete
understanding. EyeSight
®
is a driver assistance system that may not operate optimally
under all driving conditions. The driver at all times remains responsible for safe and
attentive driving. Performance of the EyeSight
®
system depends on many factors,
including vehicle maintenance, weather and road conditions. See the EyeSight
®
Owner’s
Manual for complete details on system operation and important limitations.
ADDITIONAL RESOURCES
If you’re having difficulty using any of the functions outlined in this guide, you can get more
information from the following sources:
Your Subaru Owner’s Manual:
Located in the glovebox
Online Subaru Owner’s Resources:
www.subaru.com/owners
Subaru Customer Support:
www.subaru.com/customer-support
1-800-SUBARU3 (1-800-782-2783)
PURPOSE OF THIS GUIDE
3
OVERVIEW
Your Subaru features a variety of safety
systems that are the culmination of everything
Subaru Engineers know about safety. These
systems are referred to as “Driver Assist
Technologies” and add confidence to every
trip you and your passengers take. Working
together, these systems provide enhanced
awareness, safety, and convenience in front, to
the sides, and behind your Subaru. Subaru
Driver Assist Technologies include:
EyeSight
®
Driver Assist Technology
Rear-Vision Camera
Front View Monitor
Blind-Spot Detection (BSD)
Rear Cross-Traffic Alert (RCTA)
Reverse Automatic Braking (RAB)
High Beam Assist (HBA)
Lane Departure Prevention
Steering Responsive Headlights (SRH)
OPERATION
EyeSight
®
is a driver assist technology that
uses dual color cameras to serve as an extra
pair of eyes on the road ahead to identify
vehicles in front, pedestrians, traffic lanes, or
other objects. If need be, the EyeSight
®
system can apply the brakes and/or reduce
engine power to help avoid or reduce the
severity of a collision. During these events, the
system will provide audible and visual alerts to
assist you in making decisions.
Since the characteristics and limitations of the
EyeSight
®
color cameras are similar to
humans, it is important that the cameras,
windshield, and area in front of the cameras
are treated with special care. See the Care and
Limitations appendix on page 30 for more details.
EYESIGHT
®
4
FUNCTIONS
The EyeSight
®
system features several distinct functions designed to provide extra
awareness, improve safety, reduce fatigue, and add peace of mind every time you drive
your Subaru. EyeSight
®
functions include:
Pre-Collision Braking (PCB)
Pre-Collision Brake Assist
Pre-Collision Throttle Management
Lane Departure Warning (LDW)
Lane Sway Warning
Lane Departure Prevention Function
Advanced Adaptive Cruise Control
Adaptive Cruise Control (ACC)
Lane Centering
Conventional Cruise Control
Lead Vehicle Start Alert
Pre-Collision Braking
This function helps prevent or minimize a
frontal collision with another vehicle,
pedestrian, or other objects by providing visual
and audible warnings. Warnings are displayed
in the Combination Meter Display (CMD)
and/or Multi-Function Display (MFD) with
audible beeps. If you take no corrective action,
the system automatically reduces engine
power and applies the brakes with increasing
force to help prevent or minimize the collision.
This system can be turned on or off by
Forester: Using the Pre-Collision Braking
System OFF switch (see page 14).
Outback/Legacy: In the Center Information
Display (CID) (see page 14).
Pre-Collision Brake Assist
This function recognizes a possible collision with another vehicle, a pedestrian, or object in
front while you are applying the brakes. If the system determines you are not applying
enough force, it can assist by applying additional pressure to the braking system to
decrease stopping distance.
EYESIGHT
®
5
This system can be turned on or off by
Forester: Using the Pre-Collision Braking System OFF switch (see page 14).
Outback/Legacy: In the Center Information Display (CID) (see page 14).
Pre-Collision Throttle Management
This function is designed to help prevent you from unintentionally accelerating into a
stopped vehicle or other obstacle by reducing engine power. Warnings are displayed in the
Combination Meter Display (CMD) with audible beeps.
Pre-Collision Throttle Management is helpful when:
You unintentionally place the select lever in the “D” position instead of the “R” position
and start to accelerate toward a parked car, wall or parking structure.
You start to merge onto another road when the vehicle ahead accelerates, but suddenly
stops.
This system can be turned on or off by
Forester: Using the Pre-Collision Braking System OFF switch (see page 14).
Outback/Legacy: In the Center Information Display (CID) (see page 14).
Lane Departure Warning
This function provides audible and visual
warnings if you are about to depart your lane
of travel. Using the EyeSight
®
camera, the
Lane Departure Warning function identifies
lane markings when traveling at speeds of
approximately 30 mph or greater. Warnings are
displayed in the Combination Meter Display
(CMD) with audible beeps. Lane Departure
Warning does not provide any corrective
actions.
This system can be turned on or off by
Forester: Using the Lane Departure Warning
OFF switch (see page 14).
Outback/Legacy: In the Center Information
Display (CID) (see page 14).
EYESIGHT
®
6
Lane Sway Warning
This function detects repetitive or unusual
side-to-side vehicle movement within a lane of
travel that may indicate a drowsy or inattentive
driver. Using the EyeSight
®
camera, the Lane
Sway Warning function identifies lane
markings when traveling at speeds of
approximately 37 mph or greater. Warnings are
displayed in the Combination Meter Display
(CMD) with audible beeps. Lane Sway Warning
does not provide any corrective actions.
This system can be turned on or off by
Forester: Using the Lane Departure Warning
OFF switch (see page 14).
Outback/Legacy: In the Center Information
Display (CID) (see page 14).
Lane Departure Prevention Outback/Legacy
This function provides steering assistance to
keep your Subaru in its lane of travel when
cruising on expressways, freeways, and
interstate highways. Using the EyeSight
®
camera, the Lane Departure Prevention
Function identifies lane markings when
traveling at speeds of approximately 37 mph
or greater.
EYESIGHT
®
7
Operate the Center Information Display (CID)
to turn on/off the Lane Departure Prevention
Function. Once the system is turned on, a
white Lane Departure Prevention Function icon
will be displayed on the Combination Meter
Display (CMD). As you drive the vehicle above
the minimum speed, white lane marking
graphics on the CMD will indicate that right
and/or left lane markings have been
successfully identified by the EyeSight
®
camera. If your Subaru is about to depart the
driving lane, the system can assist the steering
by gently guiding the vehicle back into your
lane. When the system is actively providing
assistance, the Lane Departure Prevention
Function icon in the CMD will change from
white to green.
Lane Departure Prevention Forester
This function provides steering assistance to
keep your Subaru in its lane of travel when
cruising on expressways, freeways, and
interstate highways at approximately 37 mph or
greater. Lane Departure Prevention uses the
EyeSight
®
camera to identify lane markings and
assists steering operation to help prevent lane
departure.
This function is turned on or off using the Lane
Keep Assist button on the right side of the
steering wheel. Once the system is turned on, a
white Lane Keep Assist icon will be displayed
on the Combination Meter Display (CMD). Blue
lane marking graphics on the CMD indicate that
the right and/or left lane markings have been successfully identified by the EyeSight
®
camera. If your Subaru is about to depart the driving lane, the system assists steering by
gently guiding the vehicle back into your lane. When the system is actively providing
assistance, the Lane Keep Assist icon in the CMD will change from white to green.
EYESIGHT
®
8
Advanced Adaptive Cruise Control
Advanced Adaptive Cruise Control is a driving support system intended to reduce the
burden on the driver when driving on an expressway (including during congestion and
when driving at high speed). Adaptive Cruise Control and Lane Centering, which operates
linked with the Adaptive Cruise Control, are used to assist with driving by automatically
controlling the accelerator, brake, and steering.
Advanced Adaptive Cruise Control
This system provides Cruise Control with the
ability to keep a safe distance from the car in
front of you. Using the EyeSight
®
camera, the
Adaptive Cruise Control function identifies
vehicles in front when traveling at speeds of
approximately 20 mph or greater and manages
the acceleration/deceleration of your Subaru
to maintain a set speed and distance.
Adaptive Cruise Control is turned on or off
using the Adaptive Cruise Control button on
the right side of the steering wheel (see page
12). Once the system is turned on, a white
Adaptive Cruise Control icon will be displayed
on the Combination Meter Display (CMD).
To set Adaptive Cruise Control, push the “SET/–” switch on the right side of the steering
wheel. The CMD will indicate a target speed. This speed can be adjusted up or down using
the “RES/SET” switch (see page 12).
Forester: When a vehicle in front of you is identified, a Lead Vehicle icon will be
displayed on the Combination Meter Display (CMD) and/or Multi-Function Display
(MFD). You can change the desired following distance from the lead vehicle by pressing
the “Increase Distance” or “Decrease Distance” buttons (see page 12).
Outback/Legacy: When a vehicle in front of you is identified, a Lead Vehicle icon will be
displayed on the Combination Meter Display (CMD) and/or Center Information Display
(CID). You can change the desired following distance from the lead vehicle by pressing
the “Increase Distance” or “Decrease Distance” buttons (see page 12).
EYESIGHT
®
9
Lane Centering
The stereo camera detects lane markings (including Botts’ dots) of the lane and the lead
vehicle, and the system assists the steering operation by working with the electric power
steering to help keep your vehicle in its lane when driving on expressways, freeways and
interstate highways.
This function can be used when the Adaptive
Cruise Control is activated. When driving at
speeds of 0 mph to approximately 90 mph, the
system detects the lane markings or the lead
vehicle and assists the driver with steering in
order to keep the vehicle close to the center of
the lane.
Conventional Cruise Control
Conventional Cruise Control maintains a
constant traveling speed set by the driver, but
does not adapt to other vehicles in front of your
Subaru. To switch to Conventional Cruise
Control, press and hold the “Increase Distance”
or “Decrease Distance” buttons on the steering
wheel for approximately two seconds. The
Cruise Control indicator on the Combination
Meter Display (CMD) will change from the
Adaptive Cruise Control icon to the
Conventional Cruise Control icon.
EYESIGHT
®
10
Lead Vehicle Start Alert
This function provides visual and audible alerts
when a vehicle in front of you starts to move,
but you have not. Warnings are displayed in
the Combination Meter Display (CMD) with
audible beeps. Lead Vehicle Start Alert is
helpful in situations where you may become
temporarily distracted at a traffic light and the
vehicle ahead begins to move.
This function can be customized.
Forester: To change this setting, use the
steering wheel mounted “i/SET” switches to
access the “EyeSight
®
settings menu on
the CMD.
Outback/Legacy: To change this setting,
operate the Center Information Display (CID).
EYESIGHT
®
11
STEERING WHEEL CONTROLS
Adaptive Cruise Control
1 Adaptive Cruise Control (ACC): Press to
turn Adaptive Cruise Control (ACC) on or
off.
2 Resume/Set: Press the switch down to
set an initial target speed. Once set,
press up or down to adjust the target
speed.
Press up the “RES/+” side briefly to
increase the vehicle set speed in
5 mph increments. Press up and hold
to increase the set speed in 1 mph
increments.
Press down the “SET/–” side briefly to
decrease the set speed in 5 mph
increments. Press down and hold to decrease the set speed in 1 mph increments.
The Cruise Control Acceleration Characteristics can be adjusted to four different
levels depending on your preference. The four levels are:
•Lv.1Eco
Lv. 2 Comfort
Lv. 3 Standard
Lv. 4 Dynamic
Forester: To change this setting, use the steering wheel mounted “i/SET” switches to
access the “EyeSight
®
settings menu on the Combination Meter Display (CMD).
Outback/Legacy: To change this setting, operate the Center Information Display
(CID).
3 Decrease Distance: Press to decrease the following distance setting while using
Adaptive Cruise Control. Press and hold to switch to Conventional Cruise Control.
4 Increase Distance: Press to increase the following distance setting while using
Adaptive Cruise Control. Press and hold to switch to Conventional Cruise Control.
5 Lane Keep Assist/Lane Centering: Press to turn on or off Lane Centering or Lane
Departure Prevention (Forester).
EYESIGHT
®
12
Customizing EyeSight
®
Settings
The EyeSight
®
system features customization of certain preferences
and warnings. Use steering wheel mounted “i/Set” switches to
navigate through the Combination Meter Display (CMD) to adjust
settings such as:
Warning Volume: Min/Mid/Max
Cruise Control Acceleration Characteristics: Eco/Comfort/
Standard/Dynamic
EYESIGHT ASSIST MONITOR (EAM) (Outback/Legacy)
The EyeSight
®
Assist Monitor (EAM) provides a
heads-up display of EyeSight
®
system functions in the
lower windshield area allowing you to keep your eyes
on the road ahead. The EAM indicators can be
changed using the steering wheel mounted “i/SET”
switches to access the “EyeSight
®
settings menu on
the Combination Meter Display (CMD). Below are the
indications provided by the EAM function:
LED
COLOR
PATTERN WARNING CONDITION
Green
Solid
illumination
A lead vehicle is detected ahead while Adaptive Cruise
Control is operating.
Yellow
Flashing on one
side
Lane Departure Warning is operating; flashes on side of
departure.
Flashing
alternately
Lane Sway Warning is operating.
Flashing
simultaneously
Steering wheel operation could not be detected for a
certain period of time.
Lane Centering was canceled automatically by the
system (flashing rapidly).
Red
Flashing
simultaneously
(4) indicators
Following Distance Warning, Pre-Collision Braking
System, Obstacle Detected Warning, or Pre-Collision
Throttle Management is operating.
The Lane Centering Function was canceled when there
was no operation of the steering wheel.
Flashing (2)
indicators on
one side
When Lane Centering Function control is active and the
vehicle appears likely to depart the lane.
The side where the vehicle has left its lane flashes, and
the side that has not left its lane illuminates.
EYESIGHT
®
13
LANE DEPARTURE WARNING AND PRE-COLLISION
BRAKING SYSTEM OFF SWITCHES
Lane Departure Warning OFF Switch
Forester: Press and hold this switch on the
overhead console for two seconds to turn off Lane
Departure Warning and the Lane Sway Warning
functions. Press and hold the switch again for two
seconds to turn the functions on.
Outback/Legacy: Navigate the Center
Information Display (CID) to access the
“EyeSight
®
settings menu, select the “Lane
Departure Prevention Function” settings
menu, and select the desired operation
setting.
When this function is off, a yellow Lane Departure Warning indicator will be illuminated in
the Combination Meter Display (CMD). It may be helpful to turn these functions off when
lane markings on the road are inconsistent.
Pre-Collision Braking OFF Switch
Forester: Press and hold this switch on the
overhead console for two seconds to turn off the
Pre-Collision Braking, Pre-Collision Brake Assist,
and Pre-Collision Throttle Management functions.
Press and hold the switch again for two seconds to
turn the functions on.
EYESIGHT
®
14
Outback/Legacy: Navigate the Center
Information Display (CID) to access the
“EyeSight
®
settings menu, select the
“Pre-Collision Braking System” settings
menu, and select the desired operation
setting.
When this function is off, a yellow Pre-Collision Braking indicator will be illuminated in the
Combination Meter Display (CMD. It may be helpful to turn these functions off when taking
your Subaru through an automatic carwash.
EYESIGHT
®
15
REAR-VISION CAMERA
This function provides a clearer view of the
area behind your Subaru to help avoid
obstacles. Using a wide-angle camera
mounted on the rear of the vehicle, an image is
automatically displayed on the multimedia
screen when the select lever is placed in the
“R” position. The displayed image features a
centerline indicator, colored distance markers,
and dynamic guide lines that move as the steering wheel is turned.
FRONT VIEW MONITOR (if equipped)
The Front View Monitor provides 180-degree
visibility from the front grille of your Subaru.
This improves visibility when making turns with
an obstructed view or pulling into a narrow
parking spot.
Outback/Legacy: Press the “VIEW” button on the center console to
display the Front View Monitor image on the Center Information Display
(CID). A guide line is also displayed to provide distance and width
references. You can manually turn off the Front View Monitor by pressing
the “VIEW” button again or the function will automatically turn off.
Camera settings can be adjusted through the Settings menu in the CID.
BLIND-SPOT DETECTION (BSD)/ REAR CROSS-
TRAFFIC ALERT (RCTA) (if equipped)
This system uses radar sensors mounted behind the rear bumper on the left and right
sides of your Subaru that warn you if another vehicle is sensed in your blind spots. These
functions provide additional awareness when changing lanes or driving in reverse.
Blind-Spot Detection (BSD)
This function senses if a vehicle is in your blind spot and provides a
visual warning (yellow light) in the corresponding side mirror frame.
The default operation of BSD is on.
DRIVER ASSIST TECHNOLOGIES
16
Lane Change Assist (LCA)
Lane change assist works with BSD to provide an additional level of warning when you
attempt change lanes with a vehicle in your blind spot. LCA will rapidly flash the
corresponding side mirror indicator if you operate your turn signal. The default operation of
LCA is on.
Rear Cross-Traffic Alert (RCTA)
This function detects a vehicle approaching from
either side as you are reversing and provides audible
and visual warnings. Warnings will appear in the upper
corners of the Rear-Vision Camera display and the
side mirrors. Audible beeping will also be heard. The
default operation of RCTA is on.
Forester: BSD/RCTA can be turned on or off by
pressing the BSD/RCTA OFF switch in the
instrument panel.
Outback/Legacy: BSD/RCTA can be turned
on or off in the Center Information Display
(CID).
When this function is off, a yellow BSD/RCTA indicator will be displayed in Combination
Meter Display (CMD).
DRIVER ASSIST TECHNOLOGIES
17
HIGH BEAM ASSIST (HBA) (if equipped)
This function uses the EyeSight
®
camera to automatically switch
the headlights between high and low beam setting when an
oncoming vehicle is detected, enhancing safety for both you and
other drivers on the road.
To activate High Beam Assist, set the headlight control switch to the
“AUTO” position and push the headlight stalk forward to the high beam position. The
green HBA indicator will illuminate on the Combination Meter Display (CMD). When vehicle
speed is above approximately 20 mph, HBA will automatically switch between high and
low beams. When the high beams are activated, the blue high beam indicator will be
displayed on the Combination Meter Display (CMD).
STEERING RESPONSIVE HEADLIGHTS (SRH) (if
equipped)
The Steering Responsive Headlights (SRH) system aims the headlight beams in the
direction you are steering. This helps to improve visibility at corners and intersections
when driving at night. While the system is normally on, you can turn the system off using
the steering wheel mounted “i/SET” switches to access the “SRH” settings menu on the
Combination Meter Display (CMD).
REVERSE AUTOMATIC BRAKING (RAB) (if equipped)
This system uses four rear bumper mounted sonar
sensors to detect objects when your Subaru is moving
between 1 and 9 mph in reverse. RAB uses the
Rear-Vision Camera image to display colored
proximity alerts when an object is detected. As an
object becomes closer to the rear of your vehicle,
audible beeps provide additional awareness in three
progressive levels. If RAB determines that a collision
with an object is possible, the system can
automatically apply the brakes to help prevent or minimize the impact.
The default operation of the RAB system is on, but in some cases, such as connecting a
trailer, it may be helpful to temporarily turn the system off. RAB can be turned off using the
Touchscreen buttons on the lower corners when the select lever is in the “R” position.
DRIVER ASSIST TECHNOLOGIES
18
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43

Subaru 2020 Outback Quick start guide

Type
Quick start guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI