2. Zebra
  3. MC1000

Zebra MC1000 Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Zebra MC1000 Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
72-85359-03 Revision A - April 2015
Zebra Technologies Corporation
Lincolnshire, IL U.S.A
http://www.zebra.com
@72-85359-03@
When installing an extended Secure Digital (SD) Card, you must remove a pad on
the back of the SD Card cover.
1. Remove two screws securing the
SD Card cover.
2. Lift the SD Card cover off the
mobile computer.
3. Peel the lower pad off the back of
the cover.
4. Install the SD Card into the mobile
computer.
5. Replace the SD Card cover onto
the mobile computer and secure
using the two screws.
If the SD Card cover does not have a
split pad on the back of the cover,
contact Zebra Support. See the
MC1000 Regulatory Guide for
contact information.
Lower Pad
Pads
Screws
SD Card Cover
MC1000 Extended SD Card
Installation Instructions
/