2. Blaze King
  3. Clarity 26 FS IPI Fan Kit

Blaze King Clarity 26 FS IPI Fan Kit Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Blaze King Clarity 26 FS IPI Fan Kit Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
180-Z5177-IPI v1.02 E October 5, 2017
Manufactured By
Valley Comfort Systems Inc., 1290 Commercial Way, Penticton, BC, V2A 3H5, Canada
Phone: 250-493-7444 Fax: 250-493-5833 www.blazeking.com info@blazeking.com
S.Z5177.IPI FAN KIT
for CLARITY 26 FS IPI (Intermittent Pilot Ignition)
(S.CL26.FS.IPI)
The optional fan kit can be controlled with the wall mounted transmitter. The
fan speed can be adjusted through six (6) speeds. To control the fan press the
MODE key on the wall mount transmitter to index to the fan control icon. Use
UP/DOWN arrow keys to turn on, off , or adjust the fan speed. A single beep
from the IFC control will confi rm the command has been received.
180-Z5177-IPI v1.02 E October 5, 2017
Page 2
S.Z5177.IPI FAN KIT for CLARITY 26 FS IPI
1. Turn off gas (see gas valve).
2. Remove the rear wire panel (four screws), the
panel is no longer needed.
3. Plug the green socket into the IFC control board.
4. Position the fan into place as shown.
Ensure the side tabs are between the support panel
and the fi rebox bottom pan.
5. Scew the fan assembly to the appliance, 2 screws
(1 each side) into the fi rebox bottom.
GAS VALVE
180-Z5177-IPI v1.02 E October 5, 2017
Page 3
S.Z5177.IPI FAN KIT for CLARITY 26 FS IPI
CLARITY 26 FS IPI WIRING
4 screws to secure back.
/