none IF-A36-000 Installation guide

Type
Installation guide

none IF-A36-000

The none IF-A36-000 is a hidden deck fastener that provides a quick and easy way to install decking boards without the need for visible screws or nails. The fastener is designed to be used with 16" on center joists and requires approximately 1.75 pieces per square foot of deck.

To install, simply attach the fastener to the joist using a deck screw, then slide the deck board into place and secure it using the upper hole on the fastener. The fastener can also be used to attach the final deck board to the inside perimeter board (rimboard).

The none IF-A36-000 is a versatile fastener that can be used with a variety of decking materials, including composite, wood, and PVC. It is also backed by a warranty that covers any defects in materials or workmanship.

none IF-A36-000

The none IF-A36-000 is a hidden deck fastener that provides a quick and easy way to install decking boards without the need for visible screws or nails. The fastener is designed to be used with 16" on center joists and requires approximately 1.75 pieces per square foot of deck.

To install, simply attach the fastener to the joist using a deck screw, then slide the deck board into place and secure it using the upper hole on the fastener. The fastener can also be used to attach the final deck board to the inside perimeter board (rimboard).

The none IF-A36-000 is a versatile fastener that can be used with a variety of decking materials, including composite, wood, and PVC. It is also backed by a warranty that covers any defects in materials or workmanship.

  • Page 1 1

none IF-A36-000 Installation guide

Type
Installation guide

none IF-A36-000

The none IF-A36-000 is a hidden deck fastener that provides a quick and easy way to install decking boards without the need for visible screws or nails. The fastener is designed to be used with 16" on center joists and requires approximately 1.75 pieces per square foot of deck.

To install, simply attach the fastener to the joist using a deck screw, then slide the deck board into place and secure it using the upper hole on the fastener. The fastener can also be used to attach the final deck board to the inside perimeter board (rimboard).

The none IF-A36-000 is a versatile fastener that can be used with a variety of decking materials, including composite, wood, and PVC. It is also backed by a warranty that covers any defects in materials or workmanship.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI