Tycon Systems ENC-SW-8X5 Datasheet

Brand: Tycon Systems

Model: ENC-SW-8X5

Type: Datasheet

ENC-SW-8x5 Spec Rev 1 3-May-12 Specifications Subject to Change Without Notice

POE Switch Outdoor Enclosure

Features

 For TP-SW series of POE switches

 Feedthru’s for up to 12 CAT5/6/Power cables

 Weatherproof / UV Resistant

 Mounts to wall or pole

Description

The ENC-SW-8x5 outdoor weatherproof POE switch enclosure is designed

especially for the Tycon TP-SW series of POE switches. It accommodates the 5

port or 8 port switches. They provide an inexpensive and convenient way to

locate the POE switch on a tower or antenna mast close to the equipment that

uses it.

There are 6 cable feedthrus which can accommodate up to 12 CAT5 or CAT6 or

power cables. The enclosure is made from UV and impact resistant plastic for

long life and worry free operation. The enclosure can be pole or wall mounted.

Specifications

Ordering:

ENC-SW-8x5

Outdoor weatherproof POE Switch enclosure

For further information contact:

ENC-SW-8x5

Weatherproof Rating

Nema 4X, IP65

Temperature Rating

-50 to +85°C (-58 to +185°F)

Humidity (RH)

0% - 100%

Inside Dimensions (LxWxH)

222 x 133 x 45mm (8.75 x 5.25 x 1.75”)

Outside Dimensions (LxWxH)

292 x 178 x 64mm (11.5 x 7 x 2.5”)

Weight

567g (1.25 lb)

Tyconpower.com

DATA SHEET

ENC-SW-8x5

693 Draper Heights Way Ste 102

Draper, UT 84020

PH: 801-432-0003

FAX: 801-618-4220

Notes:

 All shipments F.O.B. Bluffdale, UT 84065

 ENC-SW-8x5 carries a 2 year warranty

Tycon Systems ENC-SW-8X5 Datasheet

Tycon Systems ENC-SW-8X5 Datasheet

Tycon Systems ENC-SW-8X5 Datasheet

Related papers

Other documents