Stairmaster SMV-1 LCD Digital Television Owner's manual

Owner’s Manual

SMV-1

DETAIL A

SCALE 1 : 6

075-0042_A

075-0041_A 2

CONTENTS

page(s)

page

GENERAL SAFETY and CARE

3

-

5

In the Box……………………………………..

5

Mounting the Screen………………………...

5

FCC Statement……………….

5

MENU: SETUP and OPERATION

6

Main MENU – Access

6

1

CHANNEL MENU

6

-

9

1

-

1

Tuning Band…………………...

7

1

-

2

Cable Mode…………….

8

1

-

3

DTV Signal……………………..

8

1

-

4

Auto CH Search……….

9

1

-

5

Manual CH……………………..

9

1

-

6

Channel Label Options..

10

1

-

7

Menu Language……………….

10

2

Video Menu

11

-

13

2

-

1

Contrast………………………..

11

2

-

2

Brightness……………..

11

2

-

3

Sharpness……………………..

12

2

-

4

Color……………………

12

2

-

5

Tint……………………………..

12

2

-

6

Aspect Ratio…………..

13

2

-

7

Settings…………………………

13

3

Audio Menu

14

-

16

3

-

1

Audio Language………………

14

3

-

2

Base……………………

15

3

-

3

Treble ………………………….

15

3

-

4

Balance………………..

15

3

-

5

Digital Audio Output…………..

16

3

-

6

Settings………………….

16

4

Setup Menu

17

-

19

4

-

1

Set Time………………………..

17

4

-

2

Sleep Mode Timer…….

17

4

-

3

Advanced Video Mode……….

18

4

-

4

Set Password…………

18

4

-

5

Parental Control ……………...

18

4

-

6

Close Caption Options..

19

4

-

7

Display Closed Caption……….

19

5

CUSTOM FEATURES

20

-

23

5

-

1

Auto-Off Vibration Detect

20

5

-

2

Home Channel Default

21

5

-

3

Private Network Default

22

5

-

4

Auto Power Off

23

6

Headphone Jack Replacement

23

7

Docking Station Installation

24

8

Specifications

25

075-0041_A 3

GENERAL SAFETY and CARE

Thank you for your purchase of the SMV-1 personal viewing screen.

This product has been designed specifically for use in the health & fitness industry, ensuring maximum

performance and longevity in the harsh fitness club environment. Properly cared for, this product will

provide years of high-quality entertainment.

Prepare an area in which to place the product components as they

are removed from the box prior to installation. The surface of the

work area should be clean so as not to damage the screen and

associated components.

WARNING!

Do not open monitor enclosure. There are no user-serviceable parts inside.

Any changes or modifications made to this product that are not approved by

StairMaster will void the user’s warranty and authorization to operate the

equipment.

Do not open package using sharp instruments or tool.

Inspect all shipping carton for signs of damage and to ensure that the

contents of the carton have not broken loose during shipping.

075-0041_A 4

Radio Frequency Interference (RFI) Federal Communications Commission, Part 15

This device complies with Part 15 of the FCC Rules (47CFR15). Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause undesired operation.

This product generates and utilizes radio frequency energy. If not installed and maintained in accordance with the installation &

maintenance procedures as prescribed by MYE Entertainment, there is a possibility of causing interference with other services.

In order to determine whether or not this product is generating harmful interference, try performing the following steps:

 Try turning off the product by unplugging it from the AC power receptacle.

 Try powering the product from another AC power receptacle.

 Relocate or turn the antenna of the receiving device.

 Increase the distance between this product and the receiving device.

If these steps do not resolve the interference, please contact your local installing company or MYE Entertainment at

1-661-964-0217.

Do not expose unit to liquid, rain, excessive moisture

or areas of high humidity.

Do not use bent, damaged or modified power cords.

Discontinue use and contact your technician.

·

Important Safety Instructions

Do not spray cleaner directly onto monitor. Clean only with a

dry, soft cloth.

Only use the power adapter supplied with this product! Use of non-approved power

adapters may result in personal injury or damage to the product.

This product should be installed using a manufacturer-approved mounting method ONLY.

Use of unapproved mounting brackets may damage the product and void the warranty.

Route all cables safely per mounting situation. Ensure that the cables are routed in a manner

as to avoid being damaged by personnel or equipment.

Ensure the product has adequate ventilation so as not to overheat the product. Do not place

anything on the product that may impede proper air circulation and thus damage the product.

Avoid extreme temperatures. Locate the equipment away from sources of heat, such as

radiators and heat registers.

CAUTION!

RISK OF ELECTRICAL SHOCK

Do not attempt to disassemble, open or otherwise service the

product. There are no user-serviceable parts inside.

Before you begin, read all warnings.

FCC Statement

075-0041_A 5

1) SMV-1 LCD Personal Viewing Screen

2) Power Supply

3) AC Power Supply Cord

4) Manual

1

DC Power Input. 2.5mm DC jack.

5

Audio/Video Input. RCA jacks

2

AUX TV Controller Cable port. RJ45 jack.

6

AUX Audio Output. 3.5mm stereo jack

3

AUX RGB Input. HD-15 jack

7

RF Signal Input. TYPE "F Connector

4

AUX Audio Input. 3.5mm stereo jack

Mounting the Screen and Making the Connections

DC Power In

1

2

3

4

5

6

7

RF “F”

A/V IN (RCA STYLE)

Audio In

3.5mm

RGB

RJ45

CONNECTION IDENTIFICATION

Audio Out

3.5mm

Use the four screws (included) to fasten the screen to

the mount. Using screws other than those supplied,

may result in damage to the screen. It is highly

recommended to not use a power tool when

tightening these screws, as this may result in

damage to the screen. Use a #2 Phillips screwdriver,

taking care not to over-tighten!

SCREEN MOUNTING SCREWS

Fasten the F-connector of the coaxial cable on to the

fitting on the rear of the screen. It is important that

care be taken with this connector, as

over-tightening will result in serious damage to

the screen. This connector should be started using

only fingers and then tightened to 20 inch-pounds of

torque, slightly more than finger-tight.

Carefully unscrew Strain Relief cable clamp from

enclosure rear. Do not use power tools. Run the DC

cable through the cable clamp and reattach.This will

help prevent the power cable from becoming

accidentally unplugged during use. Insert the DC

power plug to the TV power jack.

IN THE BOX…

075-0041_A 6

1

2

3

4*

5

6

10

7

8

9

KEY PAD ORIENTATION

1

Power (On / Off)

2

Channel (Up / Down)

3

Volume (Up / Down)

4*

Intellijack Faulty Headphone Jack Indicator* ( Blue = Faulty Headphone Jack Detected)(See below)

5

TV Status (Green = TV On) (Red = TV Stand by)

6

Direct Channel Access (1-0)

7

Dash Key / Direct Digital Channel Access (Ex: 88 - 2)

8

Closed Caption. (Closed Caption / Mute)

9

View TV

10

View Docking Station

QUICK KEY CODES

0001

INSTANT CHANNEL PROGRAMMING FEATURE (DEFAULT: CABLE AUTO / QAM)

0002

MENU (Channel - Video - Audio - Set up)

0003

CUSTOM FEATURES (See Page 20)

MAIN MENU ACCESS (No IR remote is required to access the TV MENU)

To access the MENU for SET UP and TV ADJUSTMENTS press “0002”

To navigate through the MENU use Channel Up / Down and Volume Up / Down

ENTER/CHANGE

EXIT/BACK

SCROLL DOWN

SCROLL UP

Key Pad Orientation

There are three Key Codes for quick access to TV features.

*The IntelliJack self diagnostic headphone circuit detects when the headphone jack has failed or been damaged.

When a faulty headphone jack is detected, a BLUE “headphone” icon appears on the keypad (see #4 above). It will

remain on until a new jack is installed and the circuit is reset. (See page 23). To reset the faulty headphone jack

circuit, insert a known good pair of headphones for 5 seconds.

Intellijack Icon

075-0041_A 7

1-CHANNEL MENU

1-1 Tuning Band

To ENTER MENU

1) Push “0002” on the TV keypad.

2) Use CHANNEL  keys to select Sub-Menu.

SUB-MENU pages are:

Channel

 Video

 Audio

 Setup

3) Push Volume  key to enter a Sub-Menu.

 Tuning Band

 Cable Mode

 DTV Signal

 Auto CH Search

 Manual CH Setting

 Channel Label Options

 Menu Language

1) Use CHANNEL  to select Tuning Band.

2) Use Volume  to enter / change setting.

3) (AIR – CABLE – HRC – IRC – AUTO CABLE)

MAIN MENU To access all MENU functions you must enter MENU mode. Press “0002.”

Enter MENU (0002) and Sub-menu page “Channel”

Use Volume  to enter.

Sub-menu page “Channel”

To EXIT MENU

1) Push VOLUME  to exit MENU

To EXIT

1) Push VOLUME  to exit Sub MENU / MENU

075-0041_A 8

1-2 Cable Mode

1-3 DTV Signal

Digital cable is supported depending on transmission system. When QAM is set, 64/256 QAM is automatically detected and

set. This works only when Tuning Band is set to cable. Please check with your cable provider whether the transmission

system is 8VSB, 64QAM or 256QAM. Encrypted signals from paid channels cannot be converted into video/audio. When

transmission is 8VSB, set cable mode at VSB. When transmission is 64/256 QAM, set cable mode at QAM.

1) Use CHANNEL  keys to select DTV Signal.

2) Use Volume  key to enter.

Signal Window meter will show signal strength.

(weak/normal/strong)

1) Use CHANNEL  to select Cable Mode.

2) Use Volume  to enter / change setting.

(VSB – QAM)

Input Signal Level Requirements

Common sources of television signal are cable, satellite or over-the-air antenna systems. Many of these choices will

provide signal in analog, digital or both even both formats. In order to provide high-quality images, the signal level supplied

to each screen should be in the range of +5dBmV to +15 dBmV when read on analog channels. A signal level outside of

this range will provide less than optimum results

To EXIT

1) Push VOLUME  to exit Sub MENU / MENU

Enter MENU (0002) and CHANNEL  to “Channel”

Use Volume  to enter.

To EXIT

1) Push VOLUME  to exit Sub MENU / MENU

Enter MENU (0002) and CHANNEL  to “Channel”

Use Volume  to enter.

075-0041_A 9

1-4 Auto CH Search

1-5 Manual CH Setting

1) Use CHANNEL  keys to select Auto CH Search.

2) Use Volume  key to enter.

Broadcasting frequency is automatically searched and

saved. The search starts from analog TV (NTSC) to

digital TV (VSB/QAM), and it takes 2~4 min.

Channel numbers are allocated for weak signals from

analog broadcasting. IN DTV, weak signals or signals

without broadcasting data are ignored.

1) Use Channel  keys to select Manual CH.

2) Use Volume  key to enter channels listed.

3) Use Channel  keys to select channel

4) Use Volume  set options:

Viewable – Not Viewable

For Channel Default* / Auto Default* please refer to

Custom Features

Depending on the content provided by the cable or satellite

company, there may be some content received that is

inappropriate for your intended viewing audience. Once

channel scanning is complete, these channels can be deleted

as necessary by using the IR remote control.

If the content provider does not provide an encoded rating for

the content (Eg: MA14), inappropriate content will not be

blocked by the parental control setting of the screen.

Enter MENU (0002) and CHANNEL  to “Channel”

Use Volume  to enter.

Enter MENU (0002) and CHANNEL  to “Channel”

Use Volume  to enter.

To EXIT

1) Push VOLUME  to exit Sub MENU / MENU

This TV is equipped with an instant channel programming feature. The television tuner is preset

to Cable Standard – QAM. To program the TV in one step, complete the Signal / Power

Connections and press 0001 to begin channel programming Scan.

To access the Auto Scan through the MENU:

Instant Channel Programming Feature Installation Notice!

075-0041_A 10

1-6 Channel Label Options

1-7 Menu Language

1) Use Channel  to select Channel Label.

2) Push Volume  to enter.

3) Use Channel  to select channel.

4) Use Volume  to move to first character entry.

5) Use Channel  to select character.

6) Use Volume  to move to next character entry

Analog channels are shown as “------“ because there is

no channel info in analog.

7) To SAVE, wait 10 seconds for entry display to

disappear. Entry will be saved to Channel OSD. (On

Screen Display)

1) Use Channel  to select Menu Language.

2) Push Volume  to enter / change setting.

(English – Spanish – French)

Enter MENU (0002) and CHANNEL  to “Channel”

Use Volume  to enter.

Enter MENU (0002) and CHANNEL  to “Channel”

Use Volume  to enter.

To EXIT

1) Push VOLUME  to exit Sub MENU / MENU

075-0041_A 11

2-Video Menu - USER

2-1 Contrast

2-2 Brightness

 Contrast

 Brightness

 Sharpness

 Color

 Tint

 Color Temperature

 Aspect Ratio

 Settings

1) Use CHANNEL  to select Contrast.

2) Push Volume  to enter.

3) Use Volume  to adjust level.

Contains 3 video presets (Soft – Standard – Vivid) and 1 user adjustable option (User).

1) Enter MENU (0002) and use CHANNEL  to move to “Video”

2) Push Volume  to enter Video Mode.

3) Push Volume  to change setting. (Soft – Standard – Vivid – User)

1) Use CHANNEL  to select Brightness.

2) Push Volume  to enter.

3) Use Volume  to adjust level.

2-VIDEO MENU

Enter MENU (0002) and CHANNEL  to “Video”

Use Volume  to enter.

Enter MENU (0002) and CHANNEL  to “Video”

Use Volume  to enter.

Wait for the level display to disappear.

To EXIT: push VOLUME .

Wait for the level display to disappear.

To EXIT: push VOLUME .

075-0041_A 12

2-3 Sharpness

2-4 Color

2-5 Tint

1) Use CHANNEL  to select Tint.

2) Push Volume  to enter.

3) Use Volume  to adjust level.

1) Use CHANNEL  to select Color.

2) Push Volume  to enter.

3) Use Volume  to adjust level.

1) Use CHANNEL  to select Sharpness.

2) Push Volume  to enter.

3) Use Volume  to adjust level.

Enter MENU (0002) and CHANNEL  to “Video”

Use Volume  to enter.

Enter MENU (0002) and CHANNEL  to “Video”

Use Volume  to enter.

Enter MENU (0002) and CHANNEL  to “Video”

Use Volume  to enter.

Wait for the level display to disappear.

To EXIT: push VOLUME .

Wait for the level display to disappear.

To EXIT: push VOLUME .

Wait for the level display to disappear.

To EXIT: push VOLUME .

075-0041_A 13

2-6 Aspect Ratio

2-7 Settings

When you exit the menu, all video-related values which

were previously set will reset to factory default.

1) Use CHANNEL  to select Aspect Ratio.

2) Push Volume  to enter / change setting.

(16:9 – 4:3)

1) Use CHANNEL  to select Settings.

2) Push Volume  enter / change setting.

Enter MENU (0002) and CHANNEL  to “Video”

Use Volume  to enter.

To EXIT

1) Push VOLUME  to exit Sub MENU / MENU

To EXIT

1) Push VOLUME  to exit Sub MENU / MENU

Enter MENU (0002) and CHANNEL  to “Video”

Use Volume  to enter.

075-0041_A 14

3 Audio Menu - User

3-1 Audio Language

 Audio Language

 Bass

 Treble

 Balance

 Digital Audio Output

 Settings

Audio Language supports digital broadcasting audio as digital broadcasting include several kinds of

audio. Audio Language is set to Default. In some digital channels, audio language is not English

although English is set as audio language. It can be regarded as an error in terms of broadcasting

information, but there will be no problem in functioning.

Contains 4 audio presets (Standard – Music – Movie -Sports) and 1 user adjustable option (User).

1) Enter MENU (0002) and use CHANNEL  to move to “Audio”

2) Push Volume  to enter Audio Mode.

3) Push Volume  to change setting. (Standard – Music – Movie – Sports – User)

3 AUDIO MENU

To EXIT

1) Push VOLUME  to exit Sub MENU / MENU

075-0041_A 15

3-2 Bass

3-3 Treble

3-4 Balance

1) Use CHANNEL  to select Balance.

2) Push Volume  to enter.

3) Use Volume  to adjust level.

1) Use CHANNEL  to select Treble.

2) Push Volume  to enter.

3) Use Volume  to adjust level.

1) Use CHANNEL  to select Bass.

2) Push Volume  to enter.

3) Use Volume  keys to adjust level.

Enter MENU (0002) and CHANNEL  to “Audio”

Use Volume  to enter.

Enter MENU (0002) and CHANNEL  to “Audio”

Use Volume  to enter.

Enter MENU (0002) and CHANNEL  to “Audio”

Use Volume  to enter.

Wait for the level display to disappear.

To EXIT: push VOLUME .

Wait for the level display to disappear.

To EXIT: push VOLUME .

Wait for the level display to disappear.

To EXIT: push VOLUME .

075-0041_A 16

3-5 Digital Audio Output

3-6 Settings

1) Use CHANNEL  to select Digital Output.

2) Push Volume  to enter / change setting.

(AC-3 – PCM)

When you exit the menu, all audio-related values which

were previously set will be reset to the factory settings.

1) Use CHANNEL  to select Settings.

2) Push Volume  to enter / change setting.

Enter MENU (0002) and CHANNEL  to “Audio”

Use Volume  to enter.

To EXIT

1) Push VOLUME  to exit Sub MENU / MENU

Enter MENU (0002) and CHANNEL  to “Audio”

Use Volume  to enter.

To EXIT

1) Push VOLUME  to exit Sub MENU / MENU

075-0041_A 17

4 SETUP MENU

4-1 Set Time

4-2 Sleep Mode Timer

 Set Time

 Sleep Mode Timer

 Advanced Video Menu

 Set Password

 Parental Control

 Closed Caption Options

 Display Closed Caption

1) Use CHANNEL  to select Set Time.

2) Push Volume  to enter Set Time.

3) Use CHANNEL  keys to select setting.

 Time Zone

 Year

 Date

 Time

4) Push Volume  key to adjust.

1) Use CHANNEL  to select Sleep Timer.

2) Push Volume  to enter / change setting.

(Off - 30 - 60 - 90 min.)

Enter MENU (0002) and CHANNEL  to “Setup”

Use Volume  to enter.

Enter MENU (0002) and CHANNEL  to “Setup”

Use Volume  to enter.

To EXIT

1) Push VOLUME  to exit Sub MENU / MENU

Wait for the On Screen Display to disappear.

To EXIT: push VOLUME .

075-0041_A 18

4-3 Advanced Video Menu

4-4 Set Password

4-5 Parental Control

1) Use CHANNEL  to Advanced Video Menu.

2) Push Volume  to enter Advanced Video Menu.

3) Use CHANNEL  to select setting.

 Noise Reduction

 Color Temperature

 3D Y/C

 Adaptive Contrast

 Live Scan

 LCD Brightness

 Setting (Reset)

4) Push Volume  to enter / change setting.

1) Use CHANNEL  to select Set Password.

2) Push Volume  to enter old password.

3) Use number keys to enter old password

(Factory Set password is 0-0-0-0.)

4) Confirm password

1) Use CHANNEL  to select Parental Control.

2) Push Volume  to enter to password window.

3) Use number keys to enter password.

4) View Parental Control settings.

 MPAA

 TV RATING

5) Use Volume  and CHANNEL  select ratings.

Enter MENU (0002) and CHANNEL  to “Setup”

Use Volume  to enter.

Enter MENU (0002) and CHANNEL  to “Setup”

Use Volume  to enter.

Enter MENU (0002) and CHANNEL  to “Setup”

Use Volume  to enter.

To SAVE, wait 10 seconds for the On Screen

Display to disappear.

075-0041_A 19

4-6 Closed Caption Options

4-7 Display Closed Caption

1) Use CHANNEL  to Closed Caption Options.

2) Push Volume  to enter Closed Caption Options.

3) Factory setting is “Automatic”

4) Press Volume  enter / change to “Custom”

5) Use CHANNEL  to select Custom CC function.

 Size

 Text Color

 Text Opacity

 Background Color

 Background Opacity

 Edge Effect

 Edge Color

6) Push Volume  to enter Advanced Video Menu.

1) Use CHANNEL  to Display Closed Caption.

2) Push Volume  to enter / change setting.

(On – Off)

Enter MENU (0002) and CHANNEL  to “Setup”

Use Volume  to enter.

Enter MENU (0002) and CHANNEL  to “Setup”

Use Volume  to enter.

To EXIT

1) Push VOLUME  to exit Sub MENU / MENU

To EXIT

1) Push VOLUME  to exit Sub MENU / MENU

075-0041_A 20

5- CUSTOM FEATURES – ACCESS

Custom Features

5-1 AUTO OFF / VIBRATION DETECT

Used to set a vibration monitoring time. When no vibration is detected on the cardio equipment after the assigned

monitoring time the TV will automatically turn “Off.”

Custom Features

 Detect Vibration

 Channel Default Time

 Channel Default

 Auto Default

 Auto Power On

 Manual Channel Setting

 Set Factory Default (Reset)

1) Use CHANNEL  to DETECT VIBRATION.

2) Press Volume  to select the desired vibration

monitoring time in minutes (1-8). When no vibration

is detected on the cardio equipment for the

assigned number of minutes the TV will

automatically turn off.

Enter Custom Features (0003)

To EXIT

1) Push VOLUME  to exit Sub MENU / MENU

To ENTER CUSTOM FEATURES

1) Push “0003” on the TV keypad.

2) Use CHANNEL  keys to select needed feature.

3) Push Volume  key to change.

Page is loading ...

Stairmaster SMV-1 LCD Digital Television Owner's manual

This manual is also suitable for

Stairmaster SMV-1 LCD Digital Television Owner's manual

Related papers

Other documents