8 - English
Troubleshooting
Problem What to do
Distorted or no sound • Disconnect the amplifier or receiver from the system, and reconnect the Acoustimass
®
module to another amplifier
or receiver that is working properly. If the system now works, the problem is in your amplifier or receiver.
•
Power of
f the amplifier or receiver and check all the connections between the speakers, the module, and amplifier
or receiver.
• Refer to your amplifier or receiver’s owner’s guide for more troubleshooting information.
•
See “Checking your r
eceiver or amplifier’s speaker channels”.
Checking your receiver or amplifier’s speaker channels
If one of the speakers does not play or sounds distorted, your amplifier or receiver’s speaker channel may be defective.
1.
Disconnect both speaker cables fr
om the amplifier or receiver.
2.
Reconnect the cable fr
om the Acoustimass
®
module’s L INPUTS to the amplifier or receiver’s right speaker terminals.
3.
Disconnect both speaker cables fr
om the amplifier or receiver. Reconnect the cable from the Acoustimass
®
module’s L INPUTS to
the amplifier or receiver’s right speaker terminals.
4.
Set the amplifier or r
eceiver’s balance control all the way to the right and power it on. If the left speaker now plays properly, your
amplifier or receiver’s left speaker channel may be defective.
5.
Repeat to check your right speaker
, reconnecting the cable from the module’s R INPUTS to the amplifier or receiver’s left speaker
terminals.
CAUTION:
DO NOT connect the other speaker to the potentially defective c
hannel. If the channel is defective, it could
damage your
Acoustimass system.
Cleaning
• Clean the surface of the system with a soft, dry cloth.
• Do not use any sprays near the system. Do not use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia or
abrasives.
•
Do not allow liquids to spill into any openings.
•
You can vacuum the speaker grilles. To avoid damaging the drivers located directly behind the grille, use light pressure only.
Customer service
For additional help, contact Bose
®
Customer Service. Refer to the contact sheet in the carton.
Limited warranty
Your system is covered by a limited warranty. Details of the limited warranty are provided on the product registration card that is in the
carton. Please refer to the card for instructions on how to register. Failure to register will not affect your limited warranty rights.
The warranty information provided with this product does not apply in Australia or New Zealand. See our website at
www.bose.com.au/warranty or www.bose.co.nz/warranty for details of the Australia and New Zealand warranty.
Care and Maintenance