Roberts Gorden II User manual

Roberts Gorden
Brand
Roberts Gorden
Model
II
Type
User manual

Roberts Gorden II is a unitary infrared heating system that offers efficient and versatile heating solutions for a wide range of applications. Engineered with over 30 years of expertise in infrared heating, this device provides exceptional performance and reliability.

The Roberts Gorden II features a comprehensive range of high-BTUH input burners and tube lengths, enabling customization to suit any building size or floor plan. Its flexible design allows for straight, "U" or "L" configurations, ensuring optimal heat distribution even in complex spaces. Additionally, reflectors can be tilted or side reflectors can be added to direct heat precisely where it's needed.

Roberts Gorden II is a unitary infrared heating system that offers efficient and versatile heating solutions for a wide range of applications. Engineered with over 30 years of expertise in infrared heating, this device provides exceptional performance and reliability.

The Roberts Gorden II features a comprehensive range of high-BTUH input burners and tube lengths, enabling customization to suit any building size or floor plan. Its flexible design allows for straight, "U" or "L" configurations, ensuring optimal heat distribution even in complex spaces. Additionally, reflectors can be tilted or side reflectors can be added to direct heat precisely where it's needed.

Features/Benefits of the Vantage
®
II
Setting the Standard in Unitary Infrared Heating
Feature Benefit
Layout & Installation:
Design based on over 30 years of infrared heating experience Field-proven product performance
Broad range of high BTUH input burners and tube lengths; straight,
"U" or "L" configurations available
Fits any building size or floor plan
Reflectors can be tilted or side reflectors can be added Concentrates heat where needed
Designed to readily accept low voltage thermostats Reduces installation cost – no additional transformer required for
single heater installation.
Quick assembly stainless steel couplings Minimizes installation time
Standard flue connector Easy vent installation
Option of decorative grille for drop ceiling applications Aesthetically-appealing look in high visibility areas
Operation:
Operates with natural gas or LP gas (propane) Fuel efficient and environmentally friendly
Honeywell® SmartValve® II control Combines the gas valve and electronic ignition control functions
into one single unit
Hot surface electronic ignition control Reliable start-up
Prepurge and timed trial for ignition with multiple ignition trial Reduces nuisance lockouts
Auto reset from lockout Resets the system after one hour of lockout and begins another
sequence for ignition
Low-intensity infrared heat Warms people and objects directly, not the air
Deep-dish, high efficiency aluminum reflectors with end caps Maximizes energy reflection; minimizes heat loss by convection
Safety:
SmartValve® II control provides all gas ignition safety functions Controls gas flow, ignition source and combustion air blower and
monitors pressure switch
CSA design certified Independent testing to industry standards
Electrical and burner components separated by a partition Minimizes negative effects of contaminants and back draft
Stainless steel flex gas connector included Reliable, durable gas piping
Door interlock switch Halts burner operation for service
Detailed Installation, Operation and Service manual Reduces installation time and errors; easier to troubleshoot and
repair
Maintenance:
Diagnostic capability incorporated in burner design Reduces service time
Separate burner compartment Protects valuable electrical controls from heat exposure and
extends life of componentry
Durable, spot welded burner construction with electrostatically
applied paint
Strong, long-lasting unit
Removable burner doors Easy access for service
Mica flame observation window Flame verification and burner operation easy to observe
Three-year limited warranty on all components No hidden short-term exceptions for electrical and gas components
Roberts-Gordon Roberts-Gordon
1250 William Street 76 Main Street West
P.O. Box 44 Unit 10
Buffalo, New York 14240-0044 Grimsby, Ontario L3M 1R6
Telephone: 716.852.4400 Telephone: 905.945.5403
Fax: 716.852.0854 Fax: 905.945.0511
Toll Free: 800.828.7450
http://www.rg-inc.com
CTH2FBNA Printed in USA 06/02
  • Page 1 1

Roberts Gorden II User manual

Roberts Gorden
Brand
Roberts Gorden
Model
II
Type
User manual

Roberts Gorden II is a unitary infrared heating system that offers efficient and versatile heating solutions for a wide range of applications. Engineered with over 30 years of expertise in infrared heating, this device provides exceptional performance and reliability.

The Roberts Gorden II features a comprehensive range of high-BTUH input burners and tube lengths, enabling customization to suit any building size or floor plan. Its flexible design allows for straight, "U" or "L" configurations, ensuring optimal heat distribution even in complex spaces. Additionally, reflectors can be tilted or side reflectors can be added to direct heat precisely where it's needed.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents