American Standard Cadet 2798.012 User manual

Type
User manual
K87
© 2008 AS America Inc.
CADET™
ROUND FRONT TOILET
VITREOUS CHINA
NOTES:
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION
OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range
of tolerance established by ANSI Standard A112.19.2
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
305mm
(12)
699mm
(27-1/2)
C/L OF OUTLET
83mm
(3-1/4)
FINISHED WALL
225mm
(8-7/8)
19mm ± 6mm
(3/4 ± 1/4)
381mm
(15)
419mm
(16-1/2)
C/L OF SEAT POST HOLES
140mm (5-1/2 CENTERS)
305mm
(12)
178mm
(7)
16mm
(5/8)
FINISHED
FLOOR
762mm
(30)
241mm
(9-1/2)
152mm
(6)
495mm
(19-1/2)
222mm
(8-3/4)
SUPPLY
AS
REQ'D
381mm
(15)
*
To Be Specied:
Color: White Bone Linen Silver
Fawn Beige Black
Seat: American Standard #5322.011 “Rise and
Shine” solid plastic closed front seat with cover.
Seat: American Standard #5308.014 “Laurel
molded closed front seat with cover.
Alternate Seat:
Supply with stop:
CADET™ ROUND FRONT TOILET
2798.012
Vitreous china
Low-consumption (6.0 Lpf/1.6 gpf)
Round front siphon action jetted bowl
Fully glazed 2" trapway
AquaForce ushing technology
Close-coupled tank with raised lip detail on
tank cover
Color-matched trip lever
Speed Connect
®
tank/bowl coupling system
Sanitary bar on bowl
2 bolt caps
100% factory ush tested
3454.016 Bowl
4112.016 Tank
Nominal Dimensions:
699 x 495 x 762mm (27-1/2" x 19-1/2" x 30")
Fixture only, seat and supply by others
Alternate Tank Congurations Available:
4112.300 Tank complete with chrome all
metal trip lever
4112.500 Tank complete with Aquagard Liner
4112.600 Tank complete with tank cover
locking device
4112.700 Tank complete with Aquagard Liner
and tank cover locking device
4112.800 Tank complete with trip lever located
on right side
4112.900 Tank complete with tank cover device
and trip lever located on right side
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
Revised 2/08
  • Page 1 1

American Standard Cadet 2798.012 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI