American Standard Cadet 4112.500 User manual

Brand: American Standard

Model: Cadet 4112.500

Type: User manual

K87

CADET™

ROUND FRONT TOILET

VITREOUS CHINA

NOTES:

THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION

OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.

DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED

SEPARATELY.

IMPORTANT: Dimensions of xtures are nominal and may vary within the range

of tolerance established by ANSI Standard A112.19.2

These measurements are subject to change or cancellation. No responsibility is

assumed for use of superseded or voided pages.

305mm

(12)

699mm

(27-1/2)

C/L OF OUTLET

83mm

(3-1/4)

FINISHED WALL

225mm

(8-7/8)

19mm ± 6mm

(3/4 ± 1/4)

381mm

(15)

419mm

(16-1/2)

C/L OF SEAT POST HOLES

140mm (5-1/2 CENTERS)

305mm

(12)

178mm

(7)

16mm

(5/8)

FINISHED

FLOOR

762mm

(30)

241mm

(9-1/2)

152mm

(6)

495mm

(19-1/2)

222mm

(8-3/4)

SUPPLY

REQ'D

381mm

(15)

To Be Specied:

❏ Color: ❏ White ❏ Bone ❏ Linen ❏ Silver

❏ Fawn Beige ❏ Black

❏ Seat: American Standard #5322.011 “Rise and

Shine” solid plastic closed front seat with cover.

❏ Seat: American Standard #5308.014 “Laurel”

molded closed front seat with cover.

❏ Alternate Seat:

❏ Supply with stop:

CADET™ ROUND FRONT TOILET

❑ 2798.012

• Vitreous china

• Low-consumption (6.0 Lpf/1.6 gpf)

• Round front siphon action jetted bowl

• Fully glazed 2" trapway

• AquaForce ushing technology

• Close-coupled tank with raised lip detail on

tank cover

• Color-matched trip lever

• Speed Connect

tank/bowl coupling system

• Sanitary bar on bowl

• 2 bolt caps

• 100% factory ush tested

❑ 3454.016 Bowl

❑ 4112.016 Tank

Nominal Dimensions:

699 x 495 x 762mm (27-1/2" x 19-1/2" x 30")

Fixture only, seat and supply by others

Alternate Tank Congurations Available:

❑ 4112.300 Tank complete with chrome all

metal trip lever

❑ 4112.500 Tank complete with Aquagard Liner

❑ 4112.600 Tank complete with tank cover

locking device

❑ 4112.700 Tank complete with Aquagard Liner

and tank cover locking device

❑ 4112.800 Tank complete with trip lever located

on right side

❑ 4112.900 Tank complete with tank cover device

and trip lever located on right side

Compliance Certications -

Meets or Exceeds the Following Specications:

• ASME A112.19.2M for Vitreous China Fixtures -

includes Flush Performance, Ball Pass Diameter,

Trap Seal Depth and all Dimensions

Revised 2/08

American Standard Cadet 4112.500 User manual

American Standard Cadet 4112.500 User manual

American Standard Cadet 4112.500 User manual

Related papers