The par ts
Installation
Place the TV face down on a soft and flat surface (blanket, foam, cloth, etc.) to prevent any damage to the TV.
Put the stand to the neck of the TV set as shown below.
TV set
Stand
Screws(supplied)
4 x ST4 x 16F
Attach the stand with the supplied screws.
Front
1. Insert the stand Cover for Wall-mounting in
the bottom of the TV
2. Attach the Stand Cover with the supplied screws.
(Stand)
(Stand Cover For Wall-mounting)
* Please assemble the stand cover into the unit in order to protect your unit while using the wall mount.