HP 5382a User manual

Type
User manual

HP 5382a is a direct-counting frequency counter with a frequency range of 10 Hz to 225 MHz and a resolution of 1Hz in 1 second. It has 8 LED digits and nonsignificant zero blanking. It has an input impedance of 1 MQ, < 40 pF. Sensitivity is 25 mV rms - 30 Hz to 10 MHz and 50 mV rms - 10 Hz to 225 MHz. The HP 5382a has a rear panel input with a sensitivity of 250 mV rms and an impedance of >5000 ohms. It also has a timebase output with a frequency of 10 MHz and a voltage of 200 mVpp into a 50-ohm load.

HP 5382a is a direct-counting frequency counter with a frequency range of 10 Hz to 225 MHz and a resolution of 1Hz in 1 second. It has 8 LED digits and nonsignificant zero blanking. It has an input impedance of 1 MQ, < 40 pF. Sensitivity is 25 mV rms - 30 Hz to 10 MHz and 50 mV rms - 10 Hz to 225 MHz. The HP 5382a has a rear panel input with a sensitivity of 250 mV rms and an impedance of >5000 ohms. It also has a timebase output with a frequency of 10 MHz and a voltage of 200 mVpp into a 50-ohm load.

  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14

HP 5382a User manual

Type
User manual

HP 5382a is a direct-counting frequency counter with a frequency range of 10 Hz to 225 MHz and a resolution of 1Hz in 1 second. It has 8 LED digits and nonsignificant zero blanking. It has an input impedance of 1 MQ, < 40 pF. Sensitivity is 25 mV rms - 30 Hz to 10 MHz and 50 mV rms - 10 Hz to 225 MHz. The HP 5382a has a rear panel input with a sensitivity of 250 mV rms and an impedance of >5000 ohms. It also has a timebase output with a frequency of 10 MHz and a voltage of 200 mVpp into a 50-ohm load.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI