![](//vs1.manuzoid.com/store/data-gzf/b535c87865f31171a85f3aa63ad73adc/2/000600298.htmlex.zip/bg1.jpg)
Coin or Flat head
screwdriver
Replacing your faceplates:
1. Position a small coin or flat head
screwdriver as indicated and lift
faceplate gently. Do not lift
faceplate more then a 30 degree
angle.
2. Line up new faceplate with holes
and press down to secure all
latching tabs.
Note: It is not necessary to remove the
screws to replace the faceplate
MJ270R Series
KEM-PK36112-02