LN-228
6/24
These RJ45 connectors are standard Ethernet connectors for use in home or office networks. By attaching
the connectors to UTP cable*, you can create patch cables for interconnecting your PCs and other net-
work devices.* Use an RJ45 Crimping tool to secure connectors (LN-225/LN-224)
Network Cable Plugs - 10x
Change your UTP cable into ready-to-use
patch cables.
Network Cable Plugs
8716502004829
2 gr.
20 (H) x12 mm(W).
3,5 Kg.
320 (W) x 310 (D) x 275 mm (H)
90 gr.
150 (W) x 225(H) x 2,5 mm (D)
700 gr.
190 (W) x 163 (D) x 300mm (H)
Electrical Characteristics:
Current Rating: 1.5 Amps
Voltage Rating: 30 VAC/42 VDC
Dielectric withstanding: 1000V Rms, 1 min, (60HZ)
Insulation Resistance: 500 Megohms. Min
Contact Resistance: 20 Milliohms. Max.
Meets EIA/ TIA TSB 40-A test performance
Dual point contact terminates 24-26 ASW stranded & solid
conductors
Available in non-shielded and shielded configurations to con
-
trol EMI/RFI
Speeds up to 100MHZ
Materials and Finish:
Contact: Phosphor bronze, selective gold
plated in contact area over 100 micro-inches
nickel plated.
Housing: Polycarbonate, UL94V-0, UL94V-2
Shield: Nickel plated, brass
Data sheet: LN-228
P. 1.1.
