Sitecom LN-228 Datasheet

LN-228

6/24

These RJ45 connectors are standard Ethernet connectors for use in home or ofﬁce networks. By attaching

the connectors to UTP cable*, you can create patch cables for interconnecting your PCs and other net-

work devices.* Use an RJ45 Crimping tool to secure connectors (LN-225/LN-224)

Network Cable Plugs - 10x

Change your UTP cable into ready-to-use

patch cables.

Network Cable Plugs

8716502004829

2 gr.

20 (H) x12 mm(W).

3,5 Kg.

320 (W) x 310 (D) x 275 mm (H)

90 gr.

150 (W) x 225(H) x 2,5 mm (D)

700 gr.

190 (W) x 163 (D) x 300mm (H)

Electrical Characteristics:

Current Rating: 1.5 Amps

Voltage Rating: 30 VAC/42 VDC

Dielectric withstanding: 1000V Rms, 1 min, (60HZ)

Insulation Resistance: 500 Megohms. Min

Contact Resistance: 20 Milliohms. Max.

Meets EIA/ TIA TSB 40-A test performance

Dual point contact terminates 24-26 ASW stranded & solid

conductors

Available in non-shielded and shielded conﬁgurations to con

trol EMI/RFI

Speeds up to 100MHZ

Materials and Finish:

Contact: Phosphor bronze, selective gold

plated in contact area over 100 micro-inches

nickel plated.

Housing: Polycarbonate, UL94V-0, UL94V-2

Shield: Nickel plated, brass

Data sheet: LN-228

P. 1.1.