Dell EqualLogic PS6210XV is a high-performance storage array designed for small and medium-sized businesses. It offers exceptional scalability, flexibility, and data protection, making it ideal for a wide range of applications, including virtualization, databases, and file sharing. With its advanced features, such as thin provisioning, snapshots, and replication, the PS6210XV can help businesses improve storage efficiency, simplify management, and ensure data availability.
Dell EqualLogic PS6210XV is a high-performance storage array designed for small and medium-sized businesses. It offers exceptional scalability, flexibility, and data protection, making it ideal for a wide range of applications, including virtualization, databases, and file sharing. With its advanced features, such as thin provisioning, snapshots, and replication, the PS6210XV can help businesses improve storage efficiency, simplify management, and ensure data availability.
Setting Up a PS Series Storage Array
PS6210 Installation
Before You Begin
This poster is a condensed reference. Read the PS6210 Storage Arrays Installation and Setup Guide (provided in the box) for complete
installation information.
Register for a Dell™ EqualLogic® Customer Support Account.
If you do not have a customer service support account, go to eqlsupport.dell.com/secure/login.aspx and create one.
Download and Read the Release Notes from the Support Site.
The PS Series Storage Arrays Release Notes contain the latest product information.
Review Safety Guidelines.
Review the safety instructions in your Safety, Environmental, and Regulatory Information booklet located in the shipping box.
Prepare for Installation:
Environmental requirements
Make sure the installation location meets the power, cooling, and ventilation requirements described in the PS6210 Storage Arrays
Installation and Setup Guide (located in the shipping box).
Networking requirements
- Standard Ethernet and TCP/IP networking rules apply to a PS Series SAN
- 10 Gigabit Ethernet
Hardware requirements (not supplied)
- Standard 19-inch, four-post rack
- For Ethernet connections (use a minimum of one 10GbE port per controller):
With the 10GBASE-T port, CAT6 (or better) cable for up to 55 meters, CAT6A for up to 100 meters
With the SFP+ port, optical cable or copper SFP+ cable
- For Management connections (optional): CAT5 cable with RJ45 connector
PS SERIES STORAGE ARRAYS
Installation & Setup Manual
Step 4: Start Using the SAN
Step 3: Run the Remote Setup Wizard
Software Configuration Methods
PS Series Storage Arrays
Software Configuration
PS Series Groups
Step 1: Install the Host Integration Tools
Step 2: Collect Configuration Information
To configure the PS Series software, you need the information
in the following tables.
CHAP password
Group name
Group IP address
Membership
password
Administration
password
CHAP user name
Group Configuration
RAID policy
Array Configuration
Member name
Default gateway
Subnet mask
Array IP address
RAID policy
Where to Go Next
Multi-Member PS Series Group
Group1
1 Unpack the Shipping Box
Caution: Protect sensitive hardware. Use an electrostatic
wrist strap or a similar form of protection when handling hardware.
Shipping box contents:
Setup poster (this document)
Rail kit (if ordered)
Power cables
Documentation
PS Series Storage Array
2 Remove the Front Bezel
1. Using the bezel key, unlock the bezel.
2. Holding the bezel, lift the latch on the left side of the bezel and
swing the left side away from the array.
3. Lift the right side of the bezel off the right side of the array.
4. Set the bezel aside.
3 Install the Rails into the Rack
1. Remove the rail kit from the shipping box.
2. Install the rails into the rack.
See the Rack Installation setup poster for detailed instructions.
5 Install the Front Bezel
1. Hold the bezel with the array model number and Dell logo upright.
2. Hook the right end of the bezel onto the right side of the chassis.
3. Swing the left end of the bezel toward the left side of the chassis.
4. Press the bezel into place until the release latch closes.
5. Using the provided key, lock the front bezel. Store the key in a safe place.
4 Install the Array into a Rack
Warning! The array is heavy. Do not attempt to lift the array without assistance.
Mount the array into a four-post, 19-inch rack.
1. Slide the array onto the rails.
2. Hand-tighten the thumbscrews to the front of the rack.
Setting Up a PS Series Storage Array
Setting Up a PS Series Storage Array (continued)
Hardware Installation Is Complete!
Your array hardware should now be up and running. If it is not, make sure that you have successfully completed
all of the steps described in this poster.
If you are still experiencing problems, see the PS6210 Storage Arrays Installation and Setup Guide for technical
information and customer service contact information. Alternately, you can call technical support at 1-800-945-3355.
What to Do Next
Configure the array software. See the PS6210 Storage Arrays Installation and Setup Guide for array configuration information.
To learn more about Dell EqualLogic products, visit DellStorage.com or the Dell Tech Center site at
DellTechCenter.com/Storage. These sites contain articles, demos, white papers, and more details about the benefits
of our product family. You will be prompted to either create your customer account or enter your existing account information.
Other helpful sites:
Dell TechCenter's Storage Infrastructure and Solutions Team Publications page contains the EqualLogic Configuration
Guide to help you determine how best to build your iSCSI SAN infrastructure: en.community.dell.com/techcenter/
storage/w/wiki/2639.equallogic-configuration-guide.aspx. The site also provides an extensive compilation of application and
networking best practices and reference architectures for EqualLogic:
en.community.dell.com/techcenter/storage/w/wiki/2631.storage-infrastructure-and-solutions-team.aspx.
The Dell EqualLogic support site contains the latest Dell EqualLogic Firmware compatibility matrix on its home page, eqlsupport.
dell.com.
Notes, Cautions, and Warnings
A NOTE indicates important information that helps you make better
use of your system.
A CAUTION indicates potential damage to hardware or loss of
data if instructions are not followed.
A WARNING indicates a potential for property damage, personal
injury, or death.
Printed in U.S.A.
Printed on recycled paper.
Information in this document is subject to change without notice.
Reproduction of this material in any manner whatsoever without
the written permission of Dell EqualLogic is strictly forbidden.
Dell™ and EqualLogic® are trademarks of Dell Inc.
© Copyright 2013 Dell Inc. All rights reserved.
8 Turn On Power to the Array
Note: Before turning on power, allow enough time for the array to adjust to ambient temperature and humidity (for example, overnight).
Turn on power to both power supply modules (in any order) by pressing (|) on the power switch. The power switch is located next to
the power plug on each PSU.
Notes:
The battery backup unit installed in each controller is shipped in a partially discharged state. The first time the system is powered on,
a boot delay of up to 30 minutes might be experienced while the battery is charged to full capacity.
Batteries will start to charge, and some hardware components might start to synchronize, when power is turned on. Array LEDs will
indicate this normal activity.
7 Connect the Array to the Network
Recommended Configuration: For high performance and availability, distribute the connections across multiple network switches. The
switches must be connected with interswitch links that have sufficient bandwidth. See the PS6210 Storage Arrays Installation and Setup
Guide for more information.
10GBASE-T
Optical (SFP+)
15
1
1
10G BASE-T 10G SFP+10G BASE-T 10G SFP+
PPID
15
1
1
10G BASE-T 10G SFP+10G BASE-T 10G SFP+
PPID
CM 0
CM 1
Switch 0 Switch 1
15
1
1
10G BASE-T 10G SFP+10G BASE-T 10G SFP+
PPID
15
1
1
10G BASE-T 10G SFP+10G BASE-T 10G SFP+
PPID
CM 0
CM 1
Switch 0 Switch 1
6 Connect the Power Cables
Caution: Make sure the power switch is set to off (O) before connecting the power cables.
1. Use the power cables shipped with the array to connect each power supply module to a power source.
Note: Use separate sources of power, if possible.
2. Use the strain-relief fasteners to secure the power cables to the power supply modules so they cannot be pulled out accidentally.
See the Dell EqualLogic PS6210 Installation and Setup Manual for more information.
-
1
-
2
Dell EqualLogic PS6210XV Quick start guide
- Type
- Quick start guide
- This manual is also suitable for
Dell EqualLogic PS6210XV is a high-performance storage array designed for small and medium-sized businesses. It offers exceptional scalability, flexibility, and data protection, making it ideal for a wide range of applications, including virtualization, databases, and file sharing. With its advanced features, such as thin provisioning, snapshots, and replication, the PS6210XV can help businesses improve storage efficiency, simplify management, and ensure data availability.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Dell EqualLogic PS4210XS Quick start guide
-
Dell EqualLogic PS4210 Series Owner's manual
-
Dell EqualLogic PS4210E Owner's manual
-
Dell EqualLogic PS4110X Owner's manual
-
-
-
-
Dell EqualLogic PS6610ES Owner's manual
-
Dell EqualLogic PS6210X Owner's manual
-
Dell EqualLogic PS4100X Owner's manual