Shimano FH-A410 is a bicycle freehub designed for use with a 7-speed HG (Hyperglide) sprocket set. It is compatible with narrow type HG chains and features a built-in spacer for the top and second gear. The freehub body can be replaced if needed, but disassembly of the freehub body is not recommended. For proper and safe performance, always use the HG sprocket set bearing the same group marks and tighten the lock ring to the specified torque of 29.4 - 49 Nm (261 - 434 in. lbs.).
Shimano FH-A410 is a bicycle freehub designed for use with a 7-speed HG (Hyperglide) sprocket set. It is compatible with narrow type HG chains and features a built-in spacer for the top and second gear. The freehub body can be replaced if needed, but disassembly of the freehub body is not recommended. For proper and safe performance, always use the HG sprocket set bearing the same group marks and tighten the lock ring to the specified torque of 29.4 - 49 Nm (261 - 434 in. lbs.).
-
1
Shimano FH-A410 Service Instructions
- Type
- Service Instructions
- This manual is also suitable for
Shimano FH-A410 is a bicycle freehub designed for use with a 7-speed HG (Hyperglide) sprocket set. It is compatible with narrow type HG chains and features a built-in spacer for the top and second gear. The freehub body can be replaced if needed, but disassembly of the freehub body is not recommended. For proper and safe performance, always use the HG sprocket set bearing the same group marks and tighten the lock ring to the specified torque of 29.4 - 49 Nm (261 - 434 in. lbs.).
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Shimano CS-HG50-C7ai Exploded View
-
-
-
Shimano FH-MJ05 Service Instructions
-
-
-
-
Shimano SB-M290 Service Instructions
-
-
Shimano ST-EF20 Service Instructions