LYYT CAB-LIGHT User manual

www.avsl.com 410.400UK

Set of 3 LED Push Lights with Remote Control

Item ref: 410.400UK

User Manual

A set of 3 push lights, ideal for when additional lighting is required. These versatile lights can be switched on/off by either pushing the

lights or with the use of the remote control, which also features a timer and dimming function. As they are battery powered, you can

use these bright push lights anywhere, either fit with the adhesive stickers or fixing screws supplied.

(In the package)

3 PUSH LIGHTS + 1 REMOTE CONTROL WITH HOLDER

1 – Off

2 – On

3 – Light intensity adjustment

4 – Timer 30 minutes

Operating the push lights:

• Turn the lights on/off by either pressing the top of the lights or using the remote control and pressing the On button (2) or Off

button (1).

• Stand within close range and use the remote control to turn all 3 lights on/off at the same time. If standing further away from the

lights, the remote control will turn them on/off separately, one by one.

• Press the Timer button (4) and the lights will turn off after 30 minutes.

• Adjust brightness by pressing the Light intensity adjustment button (3).

www.avsl.com 410.400UK

INFORMATION TO KEEP - TO READ BEFORE USING

• The light set requires a total of 11 x LR03 AAA 1.5V batteries (not supplied). Each push light requires 3 x AAA batteries and

remote control requires 2 x AAA batteries.

• This product is intended for decorative use only; it is not suitable for use as household lighting.

• Non-rechargeable batteries must not be recharged.

• Do not mix new and used batteries or batteries of different types or different brands.

• Insert the batteries carefully and respect the polarity of the batteries indicated in the box.

• The terminals of a battery must not be short circuited.

• Remove used batteries from the box.

• Remove batteries before disposing of the product.

• Remove batteries if you do not use the product during a prolonged period.

• In the event a leak occurs with the batteries and the liquid (electrolyte) touches the skin, immediately clean with water and soap

or neutralise with a mild acid like lemon juice or vinegar.

• If the liquid comes into contact with the eyes, immediately rinse with clear water for at least 10 minutes, then consult a doctor.

• The light source of this luminaire is not replaceable; when the light source reaches its end of life, the entire luminaire must be

replaced.

This product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial

waste at the end of its useful life. The goods must be disposed of according to your local council guidelines.

Errors and omissions excepted.