10290 - 8
• RemovethefourM8x15Bolts(19),four
Ø20xØ8x2.0Washers(14)fromtheMainFrame(1).
• RemoveboltswiththeS6AllenWrenchprovided.
• SlidetheHandlebarPostCover(58)ontothe
Handlebar Post (7).
• InserttheTensionCable(55)throughthebottomofthe
Handlebar Post (7) and pull it out through the
square hole of Handlebar Post (7).
• ConnecttheSensorWire(50)fromtheMainFrame
(1)totheExtensionSensorWire(63)forthe
Handlebar Post (7).
• InserttheHandlebarPost(7)ontothetubeofthe
MainFrame(1)andsecurewithfourM8x15Bolts(19),
fourØ20xØ8x2.0Washers(14).
• TightentheboltswiththeS6AllenWrenchprovided.
• SlidetheHandlebarPostCover(58)downthe
Handlebar Post (7).
• RemovetheM5x45Bolt(40)andØ5BigWasher(41)
fromtheTensionControlKnob(54)usingtheMultiHex
Tool.
STEP 4: HANDLEBAR POST, HANDLEBAR
POST COVER AND TENSION CONTROL
KNOB INSTALLATION
• PutthecableendofresistancecableofTension
ControlKnob(54)intothespringhookofTension
Cable (55) as shown in gure 5A.
• PulltheresistancecableofTensionControlKnob
(54)upandplaceitintothegapofmetalbracket
of Tension Cable (55) as shown in gure 5B.
• AttachtheTensionControlKnob(54)tothe
HandlebarPost(7)withtheM5x45Bolt(40)and
Ø5 Big Washer (41).
• TightenboltwiththeMultiHexToolprovided.
63
50
58
14
19
55
54
40
41
54
55
55
54
7
5
4. ASSEMBLY STEPS (CONT.)
CAUTION:
Ensure that cables are not damaged
during assembly or when tightening bolts.
STEP 3: SEAT POST, SEAT POST COVER, SEAT CUSHION AND
SEAT SLIDING TUBE INSTALLATION
• SlidetheSeatPostCover(59)ontothetubeofthe
Main Frame (1).
• InserttheSeatPost(5)intotheSeatPostBushing
(53) on the tube of the Main Frame (1).
• AttachtheSeatPostKnob(48)ontothetubeof
theMainFrame(1)byturningitinaclockwise
directiontolocktheSeatPost(5).
• RemovethethreeM8NylonNuts(27)andthree
Ø16xØ8x1.5Washers(10)fromtheundersideof
the Seat Cushion (61).
• AttachtheSeatCushion(61)totheSeatSliding
Tube (6) with the three removed M8 Nylon Nuts (27)
andØ16xØ8x1.5Washers(10).
• TightenNylonNuts(27)andwashers(10)withthe
MultiHexTool.
• AttachtheSeatSlidingTube(6)ontopoftheSeat
Post(5),withoneØ10xØ20x2Washer(10)and
Seat Adjustment Knob (15).
3
A B
Figure 5
Figure 4