Danfoss CF2+ Installation guide

When all actuators are connected, connect CF-MC Master Controller

to mains supply.

Place the room thermostat in the room and press center button for

Link has failed.

x 1 x 5

2. Press OK button and the Install LED lights.

Press center button of CF-R room thermostat once.

Press OK button to add the room thermostat to CF-MC.

Repeat the steps for each room thermostat you wish to add.

1 2

3 4

5 6

First available output is ashing. Push > until you reach the wanted

output.

VISPA302