AH12H12E3B
Hotpoint® PTAC Heat Pump Unit with Electric Heat Backup 20 amps, 265 Volt
AH12 ELECTRIC HEATER
265 VOLT SUBBASE CONNECTED UNITS
Heater Watts 3,500
Heater BTU 10,900
Heater Amps 13.2
Min Circuit 20
Recommended protective Device 20 amp time-delay fuse or breaker
PRELIMINARY SPECIFICATIONS – SUBJECT TO CHANGE 31-5000821 Rev. 0 07-23 GEA
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
ELECTRICAL WIRING
• All wiring, including installation of receptacle, must be made in
accordance with local electrical codes and regulations.
NOTE: Aluminum wiring may pose special problems – consult a qualied
electrician.
GRILLE OPTIONS
• Stamped Aluminum Grille – RAG70
ELECTRICAL CONNECTION
• 265V Hotpoint PTACs require the use of a subbase (sold separately).
Installation must comply with local electrical codes and regulations.
• Power cord is permanently attached on all Hotpoint chassis.
AH12 HEAT PUMP
Heat Pump Watts 970
Heat Pump BTU 10,800
COP 3.2
A
C
B
70"
30"
WALL CASE DIMENSIONS
RAB80 WALL SLEEVE
Heavy-gauge galvanized steel, with
insulation, for quick self-assembly.
A – 42”, B – 13-3/4”, C – 16”
MAXIMUM CORD EXTENSION
WALL OPENING DIMENSIONS
Add 1/4” to A and C dimensions for all
cut-outs.
RAB80 16-1/4” Min. H x 42-1/4” Min. W
231-5000821 Rev. 0
AH12H12E3B
Hotpoint® PTAC Heat Pump Unit with Electric Heat Backup 20 amps, 265 Volt
PRELIMINARY SPECIFICATIONS – SUBJECT TO CHANGE
FEATURE AND BENEFITS
• 12,000 cooling BTU
• 10.5 EER
• 10,800 heating BTU
• 3.2 COP
• R32 Refrigerant – Environmental friendly, low GWP (Global
Warming Potential)
• 3-Speed Fan – Give guests control over their comfort with three
fan speeds to choose from
• 4-Temperature Limiting Options – Easily select one of four
temperature ranges for peak eciency and total customer comfort
• Intuitive Display – Allow guests to easily customize their preferred
settings and reduce maintenance calls with an easy-to-use control
panel
• Power Cord (LCDI) Included – Hotpoint PTACs come with an
attached cord for a quick and easy installation
• Automatic Emergency Heat – Keep guests comfortable with
a heating option that uses electric resistance heat in heat pump
mode
• Freeze and Frost Protection – Automatic freeze and indoor frost
control keep units operating in peak condition
• Auto Power Recovery – In case of power failures, units
automatically resume their operation when power restores,
reducing maintenance calls
• Self Diagnostics – Quickly and easily identify service needs with
a nine-point diagnostic code system
• Backed by an Industry Leader – With a long history of creating
durable products at an aordable price, Hotpoint is your trusted
PTAC brand
/