Vivo Y22 User manual

Brand: Vivo

Model: Y22

Type: User manual

Vivo Y22: Your Versatile Companion for All Your Multimedia Needs

With its impressive capabilities, the Vivo Y22 is designed to enhance your multimedia experience like never before. Dive into the world of entertainment with its support for audio, video, and similar electronic devices, ensuring seamless connectivity. Certified for safety and compliance, this device adheres to strict standards, giving you peace of mind.

Vivo Y22: Your Versatile Companion for All Your Multimedia Needs

INSTRUCTION MANUAL

Please keep observed safety notes before use

Technical date (Technical date)

Model:

Input: 100-240V~, 50/60Hz, 0.5A Max.

Output: 5Vdc, 3A or 9Vdc, 2A or 12Vdc, 1.5A

General

To comply with the published safety standards, the following must be observed when using this

adaptor.

1. The appliance is used for audio, video and similar electronic apparatus. It is certified according

to the relevant safety standards IEC 62368-1 and EN 62368-1.

2. The output power taken from the supply must not exceed the rating given on the switching

power supply.

3. The appliance is not intended to be repaired by service personnel in case of failure or

component defect (unit can be thrown away).

4. The external flexible cable or cord of this transformer cannot be replaced; If the cord is

damaged, the transformer should be scrapped.

5. Mains plug is used as the disconnect device, which shall remain readily operable.

6. The appliance shall not be exposed to dripping or splashing and that no objects filled with

liquids, such as vases,shall be placed on the appliance.

7. DISPOSAL: Do not dispose this product as unsorted municipal waste. Collection of such waste

separately for special treatment is necessary.

Manufacturer name:Shenzhen Fengxingda Technology Co., Ltd.

Manufacturer address: Room 305, Building J, Hejing Industrial Park, Qiaohe Road, Heping

Community, Fuhai Street, Baoan District, Shenzhen

Y22

FCC Requirement

Any changes or modifications not expressly approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause

undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy, and if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

– Consult the dealer or an experienced radio/TV technician for help.

Vivo Y22 User manual

Brand: Vivo

Model: Y22

Type: User manual

Vivo Y22: Your Versatile Companion for All Your Multimedia Needs

Download PDF

report

Vivo Y22 User manual

Vivo Y22 User manual

Other documents