Imada CW-500N is a wedge type grip designed to secure wire or cable samples for tensile testing. It features self-tightening jaws that provide a secure hold on the sample, making it ideal for testing a wide range of materials. With a capacity of 500N, the CW-500N is suitable for testing samples of various strengths. It is easy to install and use, with a simple lever operation to open and close the jaws. The CW-500N is compatible with Imada's horizontal stands and can be used with various force gauges to measure the tensile strength of crimp terminals, wires, and other materials.
Imada CW-500N is a wedge type grip designed to secure wire or cable samples for tensile testing. It features self-tightening jaws that provide a secure hold on the sample, making it ideal for testing a wide range of materials. With a capacity of 500N, the CW-500N is suitable for testing samples of various strengths. It is easy to install and use, with a simple lever operation to open and close the jaws. The CW-500N is compatible with Imada's horizontal stands and can be used with various force gauges to measure the tensile strength of crimp terminals, wires, and other materials.
Imada CW-500N is a wedge type grip designed to secure wire or cable samples for tensile testing. It features self-tightening jaws that provide a secure hold on the sample, making it ideal for testing a wide range of materials. With a capacity of 500N, the CW-500N is suitable for testing samples of various strengths. It is easy to install and use, with a simple lever operation to open and close the jaws. The CW-500N is compatible with Imada's horizontal stands and can be used with various force gauges to measure the tensile strength of crimp terminals, wires, and other materials.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI