iHome iBT800 User manual

Brand: iHome

Model: iBT800

Type: User manual

iHome iBT800: Your personal portable audio companion! Experience rich, immersive sound with its powerful speaker and enjoy your favorite tunes wirelessly via Bluetooth connectivity. The iBT800 is designed to be waterproof, making it the perfect companion for outdoor adventures or poolside relaxation. With its built-in color-changing LED lights, you can set the mood and create a vibrant atmosphere for any occasion. The device also features a long-lasting battery, ensuring uninterrupted playtime for your music, podcasts, or audiobooks.

iBT800 - Instruction Sheet - English

Color: Black text on white paper (1C + 1C)

Size: 102 W x 150 H mm

Material: 85gsm wood free paper

Nov 25, 2021

CHARGING THE SPEAKER

CONTROLS OVERVIEW (BOTTOM OF UNIT)

iBT800_IS_112521-A

Printed in China

Model: iBT800

For product support, please scan the QR code or visit:

www.ihome.com/help/ibt800

FCC Information

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.

This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause

undesired operation.

• Warning: Changes or modiﬁcations to this unit not expressly approved by the party responsible for compliance could void the user’s authority to

operate the equipment.

• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio

communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one

or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

ISED Statement

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s

licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device.

The device comply with ISED RF exposure requirement, users can obtain Canadian information on RF exposure and compliance.

Any Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the

equipment.

Cet équipement est conforme aux limites d'exposition aux radiations IC CNR-102 établies pour un environnement non contrôlé.

L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement

économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :

(1) L’appareil ne doit pas produire de brouillage;

(2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

L'appareil est conforme aux exigences d'exposition RF ISED, les utilisateurs peuvent obtenir des informations canadiennes sur l'exposition aux RF et

la conformité.

Tout changement ou modiﬁcation non expressément approuvé par la partie responsable de la conformité peut annuler l'autorité de l'utilisateur à

utiliser l'équipement.

CAN ICES-3 (B) / NMB-3(B)

WARNING/DISPOSAL OF UNIT

Do NOT attempt to change the built-in battery. Doing so will void the warranty and could cause personal injury and damage to your

device. To dispose of the unit, follow the instructions below:

• Never dispose of used batteries/electronics with ordinary solid wastes, since they may contain toxic substances.

• Always dispose of used batteries/electronics in accordance with the prevailing community regulations.

• Many electronics retailers now recycle batteries and other electronic components at no charge. To ﬁnd a drop-o location near

you, visit www.call2recycle.com

GENERAL BATTERY PRECAUTIONS

• Never use or charge a battery if it appears to be leaking, discolored, deformed, or in any way abnormal.

• Never disassemble the unit or attempt to remove the battery as that could cause leakage of alkaline solution or other electrolytic

substances.

• Avoid charging a rechargeable battery when the temperature is not within 5°C - 35° C (41° - 95° Fahrenheit).

• Never expose a battery to any liquid.

• Never expose a battery to excessive heat such as direct sunlight or ﬁre. Never use or store a lithium device in an unventilated

vehicle where excessive internal temperatures may be encountered.

• Always keep batteries out of the reach of infants and small children.

• Always charge Lithium devices on surfaces that won’t catch on ﬁre such as cement, steel, ceramic or stone.

Wooden tables and carpeted ﬂoors are not recommended charging surfaces.

• Do not charge batteries near ﬂammable products or liquids.

• Never leave a charging lithium device unattended.

• If the unit is to be unused for an extended period of time, such as a month or longer, charge the unit fully before storage.

IMPORTANT SAFETY INSTRUCTIONS

Please heed all warnings, read and follow all instructions and keep these instructions handy for future reference.

1 Do not use this product near water, and clean only with dry cloth.

2 Do not block any ventilation openings.

3 Heat – This product should be situated away from heat sources such as radiators, heat registers, stoves or other appliances

(including ampliﬁers) that produce heat.

4 Only use attachments/accessories speciﬁed by the manufacturer.

5 Unplug this product during lightning storms or when unused for long periods of time.

6 Damage Requiring Service – This product should be serviced by qualiﬁed service personnel when:

- Plug has been damaged.

- Objects have fallen into or liquid has been spilled into the enclosure.

- The unit has been exposed to rain. The unit has been dropped or the enclosure damaged.

- The unit exhibits a marked change in performance or does not operate normally.

7 No naked ﬂame sources, such as lighted candles, should be placed on this product.

8 Attention should be drawn to the environmental aspects of battery disposal.

9 This product is suitable for use in tropical and/or moderate climates.

10 WARNING: To reduce the risk of ﬁre or electric shock, do not expose this product to rain or moisture.

11 Do not dispose of batteries in the household trash or ﬁre.

12 Always use a UL/ETL certiﬁed charging adapter (not included), and the supplied USB charging cable.

POWER ON/OFF

Press and hold to turn speaker ON

Press to turn speaker OFF

charging (slow ﬂash)

fully charged

RED

OFF

RED

PLAYGLOW MINI

Waterproof Portable Speaker

If necessary, insert the tip of a

paper clip or other thin tool to

reset the unit

pairing (fast ﬂash)

connected to Bluetooth

BLUE

low battery (fast ﬂash)

BLUETOOTH STATUS INDICATORBATTERY STATUS INDICATOR

USB AC

adaptor

(not included)

USB charging

cable (included) CHARGE UNIT

BEFORE USE

ABOUT 2 HOURS

BLUETOOTH PAIRING

USB CHARGING PORT

RESET BUTTON

COLOR MODES/

BATTERY STATUS

FRONT OF UNIT TOP OF UNIT - LED INDICATORS

Blue LED = Bluetooth Status

PLAY/PAUSE

Red LED = Battery Status

- Press repeatedly to cycle

through color modes

- Press and hold to check

battery level status

- Press & hold to enter pairing

mode

- Select ‘iHome iBT800’ on

your BT device to connect

iHome iBT800 User manual

Brand: iHome

Model: iBT800

Type: User manual

Download PDF

report

in other languages

français: iHome iBT800 Manuel utilisateur

iHome iBT800 User manual

iHome iBT800 User manual

in other languages

Related papers

Other documents