C1090VK

OSD Audio C1090VK User manual

  • Hello! I've reviewed the datasheet for the OSD Audio C1070V and C1090VK ceiling speakers. This document provides details on their features, including the dual 70/25V transformer, wattage taps, and specifications like impedance and frequency response. I'm ready to answer any questions you have about these speakers.
  • What are the available watt taps on the transformer?
    What is the impedance of these speakers?
    What is the frequency response of these speakers?
OSD Audio | 1.888.779.4968 | osdaudio.com
Wiring Color Codes:
25V/70V Taps
C: Common Ground 70V Black
25V-5W Red
25V-2.5W Yellow
25V-1.25W Green
25V-0.63W/70V-5W Blue
25V-0.32W/70V-2.5W Brown
70V-1.25W Yellow
70V-0.63W White
70V-0.32W Grey
8Ohm: Positive Orange
Common Ground/8Ohm Black
(with taps: 5, 2.5, 1.25, .63, and .32 tap & 8 Ohms)
5, 2.5, 1.25, .63, & .32
..
~UDIO
C
1070V
IC
1090VK
Series
70/25
Volt
8"
Commercial
Ceiling Speakers
with
Transformer
Our 8" dual cone speaker with 6
oz.
magnet features a dual 70/25V transformer and white metal grille combination. The
transformer, which
is
wired and mounted, has Watt taps. A version of this speaker with a volume
control and grille combination can
be
found under model number OSD-C1090VK.
Features:
8" speaker combination with transformer & mounted grille
• 8 Ohm impendance
1
OW
RMS power
15W max. power
• 6
oz.
magnet
5W Dual 70/25V transformer
C1070V
8" Dual Paper Cone Ceiling Speaker with Transformer
C1090VK
8" Dual Paper Cone Ceiling Speaker with Transformer & Volume Control
Specifications:
Frequency Response:
Sensitivity:
Outer Dimensions:
Cutout Dimensions:
Mounting Hardware:
C1070V
40Hz-18kHz
90±3dB 1W/
1m
12" Diameter X 3.25" Depth
10
.
75
"
C1090VK
40Hz-18kHz
90±3dB 1W/
1m
12" Diameter X 3.25" Depth
10
.75"
NCC1070 Ceiling Tile Bracket
(Optional -Sold Separately)
OSD Audio
is
constantly developing procuct improvements. We reserve the right to modify product design and specificationss without notice and
without incurring any obligation.
TYPICAL
ASSEMBLY
FOR
C1070V
&
C1090VK
MOUNTING
HOLES
ARE
11¼
"
(286MM)
CENTER
TO
CENTER.
(4
ARE
TAPPED
HOLES;
4
ARE
CLEARANCE
HOLES.)
ROUND
LOUD-
SPEAKER
CLEARANCE
HOLE
CUT
11½"
(292MM)
HOLE
IN
CEILING
TILE
FOR
BACK
BOX
AND
OTHER
TYPICAL
ENCLOSURES.
NOTE
:
FLOOR-SIDE
INSTALLATION
IS
POS-
SIBLE
BY
PUSHING
ENCLOSURE
THROUGH
CLEARANCE
HOLE
AND
SECURING
LIP
OF
ENCLOSURE
TO
CEILING
TILE
AND
TILE
BRIDGE.
THE
BACK
BOX
DOES
NOT
INCLUDE
SLOTS
FOR
MOUNTING
TORSION
SPRING
GRILLES.
BAFFLE
/