VISUAL COMFORT CHA8694 User manual

Hello! I've reviewed the assembly instructions for the Visual Comfort Table Lamp CHA 8694. This document details how to assemble the lamp, including the harp, shade, light bulb installation, how to connect it to electrical outlet and how to clean the product. I'm ready to answer your questions about the lamp and its assembly process.
What should I do if I find damage or defect to the lamp?

What tool is required for assembly?

How should I clean the lamp?

Kang Jug Large Table Lamp

Item # CHA 8694

ASSEMBLY INSTRUCTIONS

This light fixture should be installed in accordance with all applicable,

local installation codes, and by a person familiar with the construction

and operation of it, as well as the hazards involved. Inspect item and

contents carefully. If any damage or defect is found, do not install.

Retain all packaging material until installation is complete and approved.

NOTICE:

Bulb not included

B (Packaged separately)

TOOLS REQUIRED (NOT INCLUDED):

Scissors

1. Carefully remove all parts from the box. Place on a clean, soft surface.

2. Install harp (C) by squeezing together and inserting into the top of

saddle (D).

3. Remove finial (A) from harp (C).

4. Remove shade (B) from packaging and install to harp (C) using

finial (A).

NOTE: If shade has additional packaging, carefully cut off from

interior of shade to avoid damages.

5. Install light bulb into the socket.

6. Remove protective cover (E) from plug.

7. Plug into electrical outlet and test the fixture.

Care Instructions: Clean only with a soft dry cloth or feather duster. Do

not use abrasive or chemical agents.