TP-LINK X95 AX7800 Whole Home Mesh Wi-Fi 6 System User manual

Brand: TP-LINK

Model: X95 AX7800 Whole Home Mesh Wi-Fi 6 System

Type: User manual

This manual is also suitable for

tp-link X95 AX7800 Whole Home Mesh Wi-Fi 6 System

TP-LINK tp-link X95 AX7800 Whole Home Mesh Wi-Fi 6 System lets you create a powerful, flexible Wi-Fi network for your home. Experience smoother streaming, gaming, and web browsing with its advanced features like beamforming, MU-MIMO, and OFDMA. Set up a guest network for visitors, prioritize devices with QoS, and keep your network secure with WPA3 encryption and HomeShield protection.

Tap a client on the Devices list to

check the details

Manage Connected Devices

In the Overview page, you can check the working status of all the connected devices, view the device details, or change the device settings.

Tap Belongs to to add a unique

profile for the device and manage

its online activities

Tap to manage the device

settings

Create New Networks

On the Deco app, you can create different Deco networks bound to your TP-Link ID, and manage them conveniently from the Deco app with one

account. You can also help family or friends by managing their network on your Deco app. Two methods are provided as below to create a new network:

from the Overview page or the Menu page.

Method 1. Create a new network from the Overview page

Tap > Create New Network Then follow the app instruction to

complete the setup

Tap to open the Menu Tap > CREATE NEW NETWORK Follow app instruction to complete the setup

Create New Networks

On the Deco app, you can create different Deco networks bound to your TP-Link ID, and manage them conveniently from the Deco app with one

account. You can also help family or friends by managing their network on your Deco app. Two methods are provided as below to create a new network:

from the Overview page or the Menu page.

Method 2. Create a new network from the Menu page

Remove/Reboot Deco

You can remove or reboot your Deco easily on the Deco app. Follow the steps below.

Tap to remove or reboot the Deco

Note: If the LED light of Deco does not turns

pulsing blue after tapping Remove, refer to

Appearance to use the reset button to reset it.

Tap to check all Deco's status Tap a Deco unit to enter the details

HomeShield

Whether protecting your network from malicious attacks, managing your family's online activities, or prioritizing devices to get better performance,

TP-Link HomeShield provides you a kit of basic (free) and Pro (charged) features to enhance your whole home network with enhanced security.

An overview of HomeShield features are shown below.

• What is HomeShield: tp-link.com/homeshield

• How to use HomeShield features and upgrade to HomeShield Pro: go to the product support page at https://www.tp-link.com and refer to

TP-Link HomeShield User Guide.

Weekly/Monthly Reports: Review a weekly or a monthly list of usage, such as security threats, top visited contents, and

more, to better manage your family’s online activities.

HomeShield Pro subscription: To enjoy more features, you can upgrade to HomeShield Pro.

Scan: Examine your network regularly to identify the potential risks, thus improving your network performance and

security.

Real-Time Protection: Real-Time Protection is for Pro users only. There are three ways to ensure your home network

and your IoT devices remains safe: (1) block malicious websites, protect your home network and applications against

external attacks and eliminate vulnerabilities; (2) prevent infected devices from sending sensitive information or security

threats to clients outside your network; (3) identify IoT devices and immediately monitor their security performance

once they join the network.

Parental Controls: Create proles for family members and specify the devices that belong to each. Set individualized

parental controls including when and for how long each person can access the internet. Block inappropriate content

and pause the internet if necessary.

QoS: Prioritize the connection of a particular device for a set duration, such as a family member’s laptop for one hour

during a video call.

Wi-Fi Settings

You can change the network name and password of your main network, create a separate network for guests to guarantee the security and privacy of

your main network, and shake your device to share the network details easily with family and friends.

Manage your main network

(eg. change your Wi-Fi network

name and password)

Tap > Wi-Fi Enable guest network Shake to share your network

Deny List

Compile a deny list to avoid the specified devices to access to your network, ensuring the safety of your personal information shared in the network.

Tap > Deny List Add clients to list Add other devices to list Manage the deny list

Online Update

TP-Link is dedicated to improving product features and providing a better customer experience. An up-to-date firmware provides better and more

stable network performance. Always update your Deco to the latest firmware version when prompted in the Deco app.

Tap > Update Deco Follow app instructions to update your Deco to the

latest version

Tip: If the rmware update fails, please reboot the main Deco, move

the Satellite Deco closer to the main Deco, then try to update again.

Advanced Features

Additional features are available under the Advanced menu. You can modify WAN settings (IPv4 & IPv6), add IPv6 rewall rules, modify LAN IP, set up

DHCP server, enable VLAN/IPTV/MAC Clone mode, reserve the same IP address for a specic device, set up port forwarding rules to make your local

computers accessible to other devices over the internet, enable TP-Link DDNS, SIP ALG, fast roaming and beamforming, control Deco's LED, change

the working mode, and congure the notication settings.

Tap > Advanced View IPv4 details or change the

internet connection type

Enable IPv6 to set up an IPv6

internet connection

Add IPv6 rewall rules to allow

specic devices to access the

specied services

Modify LAN IP to avoid IP address

conct

Change DHCP server settings Enable IPTV/VLAN mode to

support IPTV services

Enable MAC Clone if Deco fails to

connect to the internet

Tip: For more about MAC Clone, refer to https://

www.tp-link.com/support/faq/2925/

Reserve IP addresses for specic

devices to recognize and manage

the device more easily

Set up port forwarding rules to

enable devices in your network

accessible over the internet with

safety

name to access your router and

local servers using a domain name

Enable SIP ALG to communicate

with SIP (Session Initiation Protocol)

servers via NAT

Enable UPNP to allow your local

network to dynamically open ports

for applications like gaming

Enable Fast Roaming to allow

your wireless devices to switch

connection to dierent Decos

seamlessly

Enable Beamforming to

concentrate Wi-Fi signal towards

connected devices for stronger

connections

Toggle o LED to turn o the light on

Deco. Congure the Night Mode to

turn o the LED light at bedtime only

Change the operating mode

Note: When the Deco works in Access Point

mode, advanced features such as HomeShield,

IPv4, Address Reservation, Port Forwarding, and

DHCP server are not available.

Set connection alerts to receive

notications once the clients

connect to or disconnect from Deco

Set notications to receive alerts in the

notication bar

Note: If the Notications option shows “Disabled”,

go to Settings > Notications on your mobile device

to enable it.

WPS

WPS (Wi-Fi Protected Setup) helps you to quickly and securely connect a client to a network with a tap without entering any password.

Tap > WPS Tap the WPS icon on Deco app and

then on your client

Your device connects to the network

successfully if shown as below

Weekly/Monthly Reports

Review the weekly or monthly usage reports, such as security threats and total connected network devices each day.

Tap > Reports View weekly / monthly reports Tap to enable or disable reports

Managers

Add friends and family members to help manage your network. Each manager should have their own TP-Link ID.

Tap > Managers Add other accounts as managers Set privileges for managers Remove managers

FAQ

Solutions to common problems during setup or use are provided here for reference. Follow the steps in the provided link to solve your problem.

If problems still exist, contact us: https://www.tp-link.com/support

Q1. What should I do if I fail to congure the main Deco and get stuck on “We couldn't nd Deco”?

Refer to the guide https://www.tp-link.com/support/faq/2239/ or follow the video https://youtu.be/2HYuEYS9XJM

Q2. What should I do if I fail to congure the satellite Deco and get stuck on “We couldn't nd another Deco”?

Refer to the guide https://www.tp-link.com/support/faq/1447/ or follow the video https://youtu.be/iVgDzoo16T4

Q3. What should I do if I fail to congure the main Deco and get stuck on “Testing Internet Connection”?

Refer to the video https://youtu.be/OSUrGdWH-i0

Q4. What should I do if my wireless devices cannot connect to Deco?

Refer to the guide https://www.tp-link.com/support/faq/2718/

Q5. What should I do if Deco suddenly lost internet access?

Refer to the guide https://www.tp-link.com/support/faq/1454/

Q6. How can I nd a suitable spot for my Deco?

Refer to the guide https://www.tp-link.com//support/faq/1446/

Q7. What can I do if the Deco app isn't working properly?

Refer to the guide https://www.tp-link.com/support/faq/1456/

Authentication

FCC Compliance Information Statement

Product Name: AX7800 Whole Home Mesh Wi-Fi 6 System

Model Number: Deco X95

Component Name Model

I.T.E POWER SUPPLY T120250-2B4

Responsible party:

TP-Link USA Corporation

Address: 10 Mauchly, Irvine, CA 92618

Website: http://www.tp-link.com/us/

Tel: +1 626 333 0234

Fax: +1 909 527 6804

E-mail: [email protected]om

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio

or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the

equipment.

Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications

could void the user’s authority to operate the equipment.

FCC RF Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be

co-located or operating in conjunction with any other antenna or transmitter.

“To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this

transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction

with any other antenna or transmitter.”