ANKO Make Your Operating instructions

Make Your Own

Marble Art Jewellery

Place an old cloth or newspaper over your work surface.

It is recommended that you wear an art smock to protect your clothing from paint splashes.

1. Choose 10 beads to marble

ﬁrst. Fill 1/3 cup (10mL) of

white pouring paint into a

plastic cup. Choose one

marble dye colour and

add a few drops into the

centre of the white paint.

2. Insert a bamboo stick into

the hole of one of the beads.

Dip half of the bead into the

paint and twirl around until

the entire bead is covered in

paint.

3. Stand the bead & bamboo

stick in the cardboard

drying rack to dry.

4. Repeat step 2 & 3 with the

remaining nine beads.

5. Allow the beads to dry, then

coat with clear varnish.

Allow to dry. Rinse the brush

with water.

6. Repeat for the remaining

20 beads. Then thread the

cord through the beads &

tassles to create your

necklace, bracelet, key

charm etc.

Note: Stirring the beads a lot will lessen the marble eect and mix the colours together.

Plastic cups can be rinsed with water & recycled.

Instructions

148mm x 210mm