Select location block hardware to
hole. Hole diameter determines which
the smaller diameter.
a drain. Keep the pan liner
1
Server ConserveWell®
Tips and tricks to help you get started with your new ConserveWell®.
QUICK START GUIDE
© 2022 Server Products, Inc. 100742RevA
WANT TO LEARN MORE?
Visit server-products.com/manual-more for your
manual, part breakdown, support videos and more.
MODEL
XXXX
P/N
#####
SERIES
##X ##X
REFERENCE YOUR PART NUMBER
(P/N) LOCATED ON THE LID OR BASE.
diameter hole.
2
dimensions.
34
CAUTION- HOT
Unit, pans and water will be hot.
7
8
timer, press RESET to start the
ends, an alarm will beep and the
water and press RESET to restart
9
5.5"
5.75"
6"
6.25"
6.5"
COUNTERTOP
HOLE DIAMETER LOCATION BLOCKS
No location blocks needed
BLUE, embossed with “1”
BLUE, embossed with “1”
RED, embossed with “2”
RED, embossed with “2”
rim. Slide location blocks
5
5.5"
5.75"
6"
6.25"
6.5"
COUNTERTOP
HOLE DIAMETER LOCATION BLOCK FITTING
Remove all location blocks
BLUE, slide towards base
BLUE, slide away from base
RED, slide towards base
RED, slide away from base
TARGET TEMPERATURE
140°F 145°F
70°F 45 min. 50 min.
110°F 30 min. 40 min.
120°F 20 min. 30 min.
130°F 20 min. 25 min.
INITIAL
WATER
TEMP.
WATER HEATING TIMES
(When unit is not pre-heated)
TARGET TEMPERATURE
140°F 145°F
70°F 35 min. 40 min.
110°F 20 min. 25 min.
120°F 10 min. 15 min.
130°F 5 min. 10 min.
INITIAL
WATER
TEMP.
WATER HEATING TIMES
(In pre-heated unit)
6
YES
Proper water
level in PAN
1
