2. Jabra
  3. Halo2

Jabra Halo2 User manual

  • Hello! I've reviewed the user manual for the Jabra Halo and Halo2 headphones. This document provides instructions on pairing these headphones with your mobile devices via Bluetooth, including steps for entering pairing mode and troubleshooting. I'm ready to answer your questions about these headphones, feel free to ask.
  • How do I turn on my Jabra Halo/Halo2?
    How do I enter pairing mode?
    What is the pin code if I am asked for one?
Jabra Halo2 - Black
How do I pair my Jabra Halo/Halo2 with my mobile device?
To pair your Jabra Halo or Halo2 with your smartphone, tablet, or other
mobile device, follow these steps.
1. Turn on the Bluetooth setting on your mobile device.
2. Turn on your Jabra Halo/Halo2 by unfolding the headphones.
3. To enter pairing mode, press and hold the Answer/end button on the
right earcup until the Bluetooth light turns blue.
4. To pair, go to the Bluetooth menu on your mobile device and select the
Jabra Halo/Halo2 from the list of available devices.
Enter “0000” (four zeros) if you are asked for a pin code.
Note
If pairing is not successful, try the pairing steps again, or try pairing with a
different Bluetooth device. For troubleshooting tips, see here.
Optionally, try using the Bluetooth Pairing Guide which provides detailed
steps for pairing with a mobile device.
01/07/2022 23:38
https://www.jabra.in/supportpages/jabra-halo2/100-96500002-60/faq/ff096fbe-f869-4a95-
941d-380612808d66
Page 1 of 1
/