Specifications
CRITICAL DIMENSIONS
(DO NOT SCALE)
MONTICELLO
®
Single-Handle Tub/Shower Trim Only
Models: T2529, T2529CP, T2529P, T2529W
(Packed 1 per carton)
7"(178mm)
ESCUTCHEON
DIAMETER
HOT
INLET
COLD
INLET
FINISHED WALL LINE
4-1/2" (114mm)
WALL OPENING
5-1/4"
(133mm)
FLOOR
1-7/16" (36mm) MIN.
2-3/16" (56mm) MAX.
1-1/4"
L
C
45" (1143mm)/
48" (1219mm) - SHOWER
32" (813mm) - TUB OR
TUB SHOWER
7-1/2"
(191mm)
MIN.
H/A/F
TUB RIM
6' - 6"
(1981mm)
NOMINAL
FINISHED
WALL LINE
FLOOR
1-1/4"(32mm)
DIAMETER
WALL
OPENING
PLASTER
GROUND
2-3/16"
(55mm)
MAX.
PLASTIC
TUB/SHOWER
SURROUND
2-1/16"
(52mm)
REF.
3-1/2" (89mm) MAX.
2" (51mm) MIN.
THIN
WALL APPLICATION
THICK WALL APPLICATION
Rev. 6/05
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
ADA
FAUCET DESCRIPTION
• Metal construction with a chrome plated, LifeShine
®
polished brass or glacier finish
• 1/2" CC connections
• Includes showerhead, arm, flange and diverter tub spout
OPERATION
• Pull-on/push-off design
• Lever style handle with optional interchangeable insert
• Allows control of both temperature selection and
volume with a single handle
FLOW
• Showerhead limited to 2.5 gpm (9.5 L/min)
CARTRIDGE
• 1225 cartridge design
• Nonmetallic/nonferrous and stainless steel materials
• Accommodates back to back installations
STANDARDS
• Third party certified by CSA to meet CSA B-125,ASME
A112.18.1M and all applicable requirements referenced
therein and complies with the applicable requirements
of ANSI A117.1
WARRANTY
• Lifetime limited warranty against leaks, drips and finish
defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI