Limited Warranty Information
All of our Rheem package units were developed with reliability
and durability in mind. The Copeland
®
Compliant Scroll
®
Compressor features a 10-year limited warranty on all single-phase
models installed in residential applications. The factory standard
Stainless Steel Heat Exchanger on a single-phase model installed
in a residential application features a limited lifetime warranty. A
twenty-year limited warranty is offered on factory standard
Stainless Steel Heat Exchangers on single-phase models installed
in commercial applications. The condenser and evaporator coils are
warranted for five years against leaks caused by factory defects.
All other parts have a limited warranty of five years for single-
phase models installed in residential applications.
Protection You Can Count On
While your Rheem equipment is incredibly
reliable and covered by an outstanding warranty,
you can extend your warranty coverage with Protection Plus
®
extended service protection. Then you can relax and enjoy the
comfort of your Rheem Package Dual Fuel Unit – without
worrying about the cost of parts or labor for unexpected repairs.
And when Protection Plus is purchased in conjunction with your
dealer’s maintenance program, you can enjoy the peace of mind
that your equipment will be both maintained and repaired – as
needed and without additional expense.
Ask your dealer about the variety of Protection Plus plans now
available. For more information, call 1-877-276-4294 or visit
www.protectionplusonline.com.
Kwik Comfort Financing
Ask your Rheem dealer about Kwik
Comfort
®
Financing, the easy and convenient way to finance
everything associated with your Rheem equipment – your original
equipment, all subsequent service, Protection Plus extended
service protection, and even the comfort options you might
choose to add later.
Rheem Air Conditioning Division
5600 Old Greenwood Road • Fort Smith, AR 72908
1-800-548-RHEEM
Rheem also manufactures commercial air conditioning products,
as well as residential and commercial water heater products.
In keeping with its policy of continued progress and product improvement
Rheem reserves the right to make changes without notice.
Printed in the U.S.A. 5/06 DC Form No. M11-6503
A Look Inside
5
6
7
2
3
4
8
www.rheemac.com
Rheem Classic Series
®
Model RQPW-B 14 SEER
Package Dual Fuel Units
Rheem Classic Series
®
Model RQPW-B 14 SEER
Package Dual Fuel Units
The Features You Want
1. The Package Dual Fuel Unit.
The Package Dual Fuel Unit is a package heat pump
with a gas furnace installed in the heat section instead of electric
heat that a standard package heat pump features. This hybrid package
system allows for both comfort and energy savings by utilizing the
electric heat pump for warmth, except in colder periods, which is
when the gas furnace would take over to assure maximum comfort
and energy savings.
2. The Copeland
®
Scroll
®
Compressor.
All of our residential package units – regardless of efficiency level –
feature the Copeland Compliant Scroll Compressor. The scroll
compressor uses a more advanced technology than traditional
reciprocating compressors. They have fewer moving parts, and they
are quieter, more efficient, and longer lasting.
3. Durable Cabinet with Louvered Condenser Compartment.
Our cabinets have a powder painted finish that protects them from the
harshest weather extremes. And our louvered condenser compartment is
the best in the industry for protecting the condenser coil against yard
hazards and weather extremes.
4. Grille/Fan Motor Mount. Our motor mount helps protect the fan
motor from the elements for longer life. Its design dependability helps
reduce vibration and noise.
5. Furnace Compartment. Located inside the easily accessible
furnace compartment is the control box, draft inducer motor, in-shot
gas burners, the gas valve and manifold. Control box operational
controls are “up front” for quick access and service diagnostics.
The draft inducer motor is specially designed to quietly provide
combustion air while simultaneously venting outdoors the combustion
products from the furnace heat exchanger. In addition to the draft
inducer motor, the in-shot gas burners, gas valve and manifold
efficiently regulate the flow of gas for combustion. These new Package
Dual Fuel Units also feature direct-spark ignition and remote flame
sensors for added dependability and efficiency.
6. Matched Blower/Evaporator Coil Unit. The blower is
responsible for the flow of air into your ductwork. It has been designed
to match the evaporator coil and other system components for
maximum efficiency and quiet operation. In addition, the coil features
rifled copper tubing and enhanced fins for improved efficiency.
7. Tubular Heat Exchanger. Our new Package Dual Fuel Units
feature a tubular stainless steel heat exchanger design. Tubular heat
exchangers are more efficient and durable than older-style clamshell
heat exchangers. The factory standard stainless steel heat exchanger is
backed by a limited lifetime warranty in residential applications.
8. Service Fittings. Exterior service fittings enable a serviceman to
quickly determine unit operating conditions.
1