Sony PCV-RX462DS User manual

ii

Notice to Users

whole or in part without written permission

manual and the software described herein, in

whole or in part, may not be reproduced,

translated, or reduced to any

machine-readable form without prior written

approval.

SONY ELECTRONICS INC. PROVIDES NO

WARRANTY WITH REGARD TO THIS

MANUAL, THE SOFTWARE, OR OTHER

INFORMATION CONTAINED HEREIN

AND HEREBY EXPRESSLY DISCLAIMS

ANY IMPLIED WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR

ANY PARTICULAR PURPOSE WITH

REGARD TO THIS MANUAL, THE

SOFTWARE, OR SUCH OTHER

INFORMATION. IN NO EVENT SHALL

SONY ELECTRONICS INC. BE LIABLE

FOR ANY INCIDENTAL,

CONSEQUENTIAL, OR SPECIAL

DAMAGES, WHETHER BASED ON TORT,

CONTRACT, OR OTHERWISE, ARISING

OUT OF OR IN CONNECTION WITH THIS

MANUAL, THE SOFTWARE, OR OTHER

INFORMATION CONTAINED HEREIN OR

THE USE THEREOF.

Sony Electronics Inc. reserves the right to

make any modification to this manual or the

information contained herein at any time

without notice. The software described

herein is governed by the terms of a separate

user license agreement.

This product contains software owned by

Sony and licensed by third parties. Use of

such software is subject to the terms and

conditions of license agreements enclosed

with this product. Some of the software may

not be transported or used outside the

United States. Software specifications are

subject to change without notice and may not

necessarily be identical to current retail

versions.

Updates and additions to software may

require an additional charge. Subscriptions to

online service providers may require a fee

and credit card information. Financial

services may require prior arrangements

with participating financial institutions.

Sony, VAIO, the VAIO logo, VAIO Digital

Studio, and i.LINK are trademarks of Sony.

Intel, and Pentium are trademarks of Intel

Corporation. Microsoft, Windows, and the

Windows Me logo are registered trademarks

of Microsoft Corporation. PS/2 is a registered

trademark of IBM Corporation. RIMM is a

trademark of Rambus Incorporated.

All other trademarks are trademarks or

registered trademarks of their respective

owners.

Owner’s Record

The model number and serial number are

located on the back of your VAIO®

computer. Record the serial number in the

space provided here. Refer to the model and

serial number when you call your Sony

Service Center.

Model Numbers: PCV-RX462DS/

PCV-RX463DS/PCV-RX465DS/

PCV-RX470DS/PCV-RX480DS/

PCV-RX490TV

Serial Number:________________________

iii

Safety Information and

Caution

❑ To prevent fire or shock hazard, do

not expose your desktop to rain or

moisture.To avoid electrical shock,

do not open the cabinet. Refer

servicing to qualified personnel

only.

❑ Never install modem or telephone

wiring during a lightning storm.

❑ Never install telephone jacks in wet

locations unless the jack is

specifically designed for wet

locations.

❑ Never touch uninsulated telephone

wire or terminals unless the

telephone line has been

disconnected at the network

interface.

❑ Use caution when installing or

modifying telephone lines.

❑ Avoid using the modem during an

electrical storm.

❑ Do not use the modem or a

telephone to report a gas leak in the

vicinity of the leak.

❑ The socket outlet shall be installed

near the equipment and shall be

easily accessible.

DVD-ROM Laser Diode Properties

(PCV-RX462DS/PCV-RX463DS/

PCV-RX465DS/PCV-RX470DS/

PCV-RX480DS)

Laser output 0.4 mW (DVD)

0.14 mW (CD)

Wave Length 650-655 nm (DVD)

785 nm (CD)

CD-RW Laser Diode Properties

(PCV-RX462DS/PCV-RX463DS/

PCV-RX465DS/PCV-RX470DS/

PCV-RX480DS)

Laser output 1.0 mW (Read)

43.5 mW (Write)

Wave Length 780–787 nm

DVD-RW Laser Diode Properties

(PCV-RX490TV)

Laser output 1.3 mW (CD-read)

1.1 mW (DVD-read)

21.9 mW (DVD-write)

42.8 mW (CD-write)

Wave Length 650-660 nm (DVD)

773-797 nm (CD)

CD-ROM Laser Diode Properties

(PCV-RX490TV)

Laser output 0.2 mW

Wave Length 760-810 nm

iv

❑ Pour prévenir tout risque d’incendie

ou d’électrocution, garder cet appareil

à l’abri de la pluie et de l’humidité.

❑ Pour prévenir tout risque

d’électrocution, ne pas ouvrir le

châssis de cet appareil et ne confier

son entretien qu’à une personne

qualifiée.

❑ Ne jamais effectuer l’installation de fil

modem ou téléphone durant un orage

électrique.

❑ Ne jamais effectuer l’installation

d’une prise téléphonique dans un

endroit mouillé à moins que la prise

soit conçue à cet effet.

❑ Ne jamais toucher un fil téléphonique

à découvert ou un terminal à moins

que la ligne téléphonique n’ait été

débranché de l’interface réseau.

❑ Soyez très prudent lorsque vous

installez ou modifiez les lignes

téléphoniques.

❑ Évitez d’utiliser le modem durant un

orage électrique.

❑ N'utilisez pas le modem ni le

téléphone pour prévenir d'une fuite

degazvousêtesprèsdelafuite.

❑ L’appareil doit être le plus près

possible d’une prise murale pour en

faciliter l’accès.

! To change the backup battery,

contact your nearest Sony

Service Center.

! Caution - The use of optical

instruments with this product

will increase eye hazard. As the

laser beam used in this product is

harmful to the eyes, do not

attempt to disassemble the drive

cabinet. Refer servicing to

qualified personnel only.

! Danger - Visible and invisible

laser radiation when drive is

open. Avoid direct exposure to

beam.

! For CD-RW: Danger - Invisible

laser radiation when open. Avoid

direct exposure to beam.

! For DVD-RW: Danger - Invisible

laser radiation when open. Avoid

direct exposure to beam.

! Caution - For ADSL, HomePNA,

and V.90 modem models: to

reduce the risk of fire, use only

No. 26 AWG or larger

telecommunication line cord.

v

For questions regarding your product or

for the Sony Service Center nearest you,

call 1-888-476-6972 in the United States or

1-800-961-7669 in Canada.

Sony Customer Support can be reached at

http://www.sony.com/pcsupport.

Regulatory Information

Model No.: PCVA-IMB4A

This device complies with Part 15 of the

FCC rules. Operation is subject to the

following two conditions:

(1) This device may not cause harmful

interference, and

(2) this device must accept any

interference received, including

interference that may cause undesired

operation.

This equipment has been tested and found

to comply with the limits for a Class B

digital device, pursuant to Part 15 of the

Rules. These limits are designed to

provide reasonable protection against

harmful interference in a residential

installation. This equipment generates,

uses, and can radiate radio frequency

energy and, if not installed and used in

accordance with the instructions, may

cause harmful interference to radio

communications. However, there is no

guarantee that interference will not occur

in a particular installation. If this

equipment does cause harmful

! Pour changer la pile de rechange,

veuillez contacter votre centre de

service Sony le plus près.

! Avertissement : L'utilisation

d'instruments optiques avec ce

produit augmente les risques

pour les yeux. Puisque le faisceau

laser utilisé dans ce produit est

dommageable pour les yeux, ne

tentez pas de désassembler le

boîtier. Adressez-vous à un agent

de service qualifié.

! Danger : Radiation laser visible et

invisible si ouvert. Évitez

l’exposition directe au faisceau.

! Pour les CD-RW : Danger :

Radiation laser visible et invisible

si ouvert. Évitez l'exposition

directe au faisceau.

! Pour les DVD-RW : Danger :

Radiation laser visible et invisible

si ouvert. Évitez l'exposition

directe au faisceau.

! Attention : Pour ADSL, HomePNA,

et V.90 modele modem : afin de

réduire les risques d'incendie,

n'utilisez qu'un cordon de

communication N0. 26 AWG ou

plus gros.

Declaration of Conformity

Trade Name: SONY

Model No.: PCV-RX462DS

PCV-RX463DS

PCV-RX465DS

PCV-RX470DS

PCV-RX480DS

PCV-RX490TV

Responsible Party: Sony Electronics Inc.

Address: 680 Kinderkamack Rd

Oradell, NJ 07649

Telephone: 201-930-6972

This phone number is for FCC-related matters

only.

This device complies with Part 15 of FCC Rules.

Operation is subject to the two following

conditions:

(1) This device may not cause harmful

interference, and

(2) this device must accept any interference

received, including interference that may cause

undesired operation.

vi

interference to radio or television reception,

which can be determined by turning the

equipment off and on, the user is encouraged

to try to correct the interference by one or

more of the following measures: :

❑ Reorient or relocate the receiving

antenna.

❑ Increase the separation between the

equipment and the receiver.

❑ Connect the equipment into an outlet

on a circuit different from that to

which the receiver is connected.

❑ Consult the dealer or an experienced

radio/TV technician for help.

You are cautioned that any changes or

modifications not expressly approved in this

manual could void your authority to operate

this equipment.

Only peripherals (such as computer input/

output devices, terminals, and printers) that

comply with FCC Class B limits may be

attached to this computer product. Operation

with noncompliant peripherals is likely to

result in interference to radio and television

reception.

All cables used to connect peripherals must

be shielded and grounded. Operation with

cables, connected to peripherals, that are not

shielded and grounded, may result in

interference to radio and television reception.

FCC Part 68

This equipment complies with Part 68 of the

FCC rules. The FCC Ringer Equivalence

Number (REN) for this equipment is 0.79 B

(for Lucent modem), or 0.0 B (for HomePNA

modem). If requested, this information must

be provided to the telephone company.

This modem uses the USOC RJ-11 telephone

jack.

The REN is used to determine the quantity of

devices which may be connected to the

telephone line. Excessive RENs on the

telephone line may result in the devices not

ringing in response to an incoming call. In

most, but not all areas, the sum of the RENs

should not exceed five (5.0). To be certain of

the number of devices that may be connected

to the line, as determined by the total RENs,

contact the telephone company to determine

the maximum REN for the calling area.

Iftheterminalequipmentcausesharmtothe

telephone network, the telephone company

will notify you in advance that temporary

discontinuance of service may be required.

But if advance notice is not practical, the

telephone company will notify the customer

as soon as possible. Also, you will be advised

of your right to file a complaint with the FCC

if you believe it is necessary.

The telephone company may make changes

in its facilities, equipment, operations or

procedures that could affect the operations of

the equipment. If this happens, the telephone

company will provide advance notice in

order for you to make the necessary

modifications in order to maintain

uninterrupted service.

vii

If trouble is experienced with this modem,

forrepairorwarrantyinformation,please

contact 1-888-4SONY-PC, or write to the

Sony Customer Information Center, 12451

GatewayBlvd.,FortMyers,FL33913.If

the trouble is causing harm to the

telephone network, the telephone

company may request that you remove

the equipment from the network until the

problem is resolved.

Repair of this equipment should be made

only by a Sony Service Center or Sony

authorized agent. For the Sony Service

Center nearest you, call 1-888-4SONYPC

(1-888-476-6972).

This equipment cannot be used on public

coin service provided by the telephone

company. Connection to Party Line Service

is subject to state and possible provincial

tariffs. (Contact the state or provincial utility

service commission, public service

commission, or corporation commission for

information.)

Telephone Consumer

Protection Act of 1991

(United States)

The Telephone Consumer Protection Act

of 1991 makes it unlawful for any person

to use a computer or other electronic

device to send any message via a

telephone facsimile machine unless such

message clearly contains, in a margin at

the top or bottom of each transmitted page

or on the first page of the transmission, the

date and time it is sent and an

identification of the business, other entity,

or individual sending the message, and

the telephone number of the sending

machine or such business, other entity, or

individual.

In order to program this information into

your facsimile, see your fax software

documentation

Telephone Consumer

Guidelines (Canada)

Pleaserefertoyourtelephonedirectory

under‘PrivacyIssues’and/or‘Termsof

Service.’ For more detailed information,

please contact:

CRTC

Terrasses de la Chaudiére, Tour centrale

1 promenade du Portage, 5 étage Hull PQ

K1A 0N2.

This Class B digital apparatus complies with

Canadian ICES-003.

Cet àppareil numérique de la classe B est

conforme à la norme NMB-003 du Canada.

Disposal of Lithium Battery

You can return your unwanted lithium

batteries to your nearest Sony Service

Center or Factory Service Center.

✍ In some areas the disposal of lithium

ion batteries in household or business

trash may be prohibited.

viii

For the Sony Service Center nearest you, call

1-888-476-6972 in the United States or

1-800-961-7669 in Canada.

! Do not handle damaged or

leaking lithium batteries.

! Danger of explosion if battery is

incorrectly replaced. Replace

only with the same or

equivalent type recommended

by the manufacturer. Discard

used batteries according to the

manufacturer’s instructions.

! The battery pack used in this

device may present a fire or

chemical burn hazard if

mistreated. Do not disassemble,

heat above 212°F (100°C) or

incinerate.

Dispose of used battery

promptly.

Keep away from children.

! Ne pas manipuler les batteries

au lithium qui fuient ou sont

endommagées.

! Une batterie non conforme

présente un danger d'explosion.

La remplacer seulement par une

batterie identique ou de type

équivalent recommandé par le

fabricant. Évacuer les batteries

usées selon les directives du

fabricant.

! La manutention incorrecte du

module de batterie de cet

appareil présente un risque

d'incendie ou de brûlures

chimiques. Ne pas démonter,

incinérer ou exposer à une

température de plus de 100°C.

Évacuer promptement la

batterie usée. Garder hors de

portée des enfants.

ix

Industry Canada Notice

NOTICE: The Industry Canada label

identifies certified equipment. This

certification means that the equipment

meets certain telecommunications

network protective, operational and safety

requirements as prescribed in the

appropriate Terminal Equipment

Technical Requirements document(s). The

Department does not guarantee the

equipment will operate to the userís

satisfaction.

Before installing this equipment, users

should ensure that it is permissible to be

connected to the facilities of the local

telecommunications company. The

equipment must also be installed using an

acceptable method of connection.

The customer should be aware that

compliance with the above conditions

may not prevent degradation of service in

some situations.

Repairs to certified equipment should be

coordinated by a representative

designated by the supplier. Equipment

malfunctions or any repairs or alterations

made by the user to this equipment may

give the telecommunications company

cause to request that the user disconnect

the equipment.

Users should ensure for their own

protection that the electrical ground

connections of the power utility, telephone

lines and internal metallic water pipe

system, if present, are connected together.

This precaution may be particularly

important in rural areas.

CAUTION: Users should not attempt to

make such connections themselves, but

should contact the appropriate electrical

inspection authority, or electrician, as

appropriate.

NOTICE: The Ringer Equivalence

Number (REN) assigned to each terminal

device provides an indication of the

maximum number of terminals allowed to

be connected to a telephone interface. The

termination on an interface may consist of

any combination of devices subject only to

the requirement that the sum of the Ringer

Equivalence Numbers of all the devices

does not exceed 5. The Ringer Equivalence

Number for this equipment is 0.79 B (for

Lucentmodem),or0.0B(forHomePNA

modem).

Avis de L’industrie Canada

AVIS: L’étiquette d’Industrie Canada

identifielematérielhomologué.

Cette étiquette certifie que le matériel est

conforme aux normes de protection,

d’exploitation et de sécurité des réseaux de

télécommunications, comme le

prescrivent les documents concernant les

exigences techniques relatives au matériel

terminal. Le Ministère n’assure toutefois

pas que le matériel fonctionnera à la

satisfaction de l’utilisateur.

Avant d’installer ce matériel, l’utilisateur

doit s’assurer qu’il est permis de le

raccorder aux installations de l’entreprise

locale de télécommunication. Le matériel

doit également être installé en suivant une

méthodeacceptéederaccordement.

L’abonné ne doit pas oublier qu’il est

possible que la conformité aux conditions

énoncées ci-dessus n’empêche pas la

dégradation du service dans certaines

situations.

Les réparations de matériel homologué

doivent être coordonnées par un

représentant désigné par le fournisseur.

L’entreprise de télécommunications peut

demander à l’utilisateur de débrancher un

appareil à la suite de réparations ou de

modifications effectuées par l’utilisateur

ou à cause de mauvais fonctionnement.

Pour sa propre protection, l’utilisateur doit

s’assurer que tous les fils de mise à la terre

de la source d’énergie électrique, des

x

lignes téléphoniques et des canalisations

d’eau métalliques, s’il y en a, sont raccordés

ensemble. Cette précaution est

particulièrement importante dans les régions

rurales.

Avertissement: L’utilisateur ne doit pas

tenter de faire ces raccordements lui-même; il

doit avoir recours à un service d’inspection

des installations électriques, ou à un

électricien, selon le cas.

AVIS: L’indice d’équivalence de la sonnerie

(IES) assigné à chaque dispositif terminal

indiquelenombremaximaldeterminauxqui

peuvent être raccordés à une interface.

La terminaison d’une interface téléphonique

peut consister en une combination de

quelques dispositifs, à la seule condition que

la somme d’indices d’équivalence de la

sonnerie de tous les dispositifs n’excède pas

5.L’indiced’équivalencedelasonneriedece

matériel est de 0.79 B (pour Lucent modem),

ou 0.0 B (pour HomePNA modem).

xi

Contents

Notice to Users .................................................................................... ii

Owner’s Record................................................................................... ii

Safety Information and Caution ................................................... iii

Regulatory Information.......................................................................v

FCC Part 68 ......................................................................................... vi

Telephone Consumer Protection Act of 1991 (United States) .... vii

Telephone Consumer Guidelines (Canada).................................. vii

Disposal of Lithium Battery ............................................................ vii

Industry Canada Notice.....................................................................ix

Avis de L’industrie Canada...............................................................ix

Chapter 1 — Identifying Components................................1

Front View....................................................................................................2

Drives.....................................................................................................3

Buttons and Switches ..........................................................................6

Indicators...............................................................................................7

Connectors ............................................................................................8

Rear View ...................................................................................................10

Icons .....................................................................................................11

I/O Connectors ..................................................................................13

Expansion Slots ..................................................................................18

Remote Control..........................................................................................19

PCV-RX490TV ....................................................................................19

Chapter 2 — Configuring Your System ............................21

Accessing the BIOS Setup Utility............................................................22

Changing the Display's Power Management Settings.........................23

VAIO Digital Studio™ System Reference Manual

xii

Chapter 3 — Removing, Installing, and Replacing

Components....................................................................... 27

Removing the Side Cover .......................................................................28

Replacing the Side Cover ........................................................................29

Installing a PCI Add-In Card .................................................................30

Removing a PCI Add-in Card ................................................................32

Replacing the Lithium Battery ...............................................................34

Installing System Memory ......................................................................37

Removing a Memory Module ................................................................41

Removing a Slot Cover.............................................................................43

Covering an Open I/O Slot ....................................................................44

Installing a 3.5-inch Internal Hard Disk Drive......................................45

To prepare a startup disk (PCV-RX490TV model only)...............45

To install a 3.5-inch internal hard disk drive (all models)...........46

To set up the new hard drive with the startup disk

(PCV-RX490TV model only).............................................................49

To identify the additional hard disk space for Giga Pocket use

(PCV-RX490TV model only).............................................................49

Removing the Power Supply...................................................................50

Replacing the Power Supply ...................................................................51

Chapter 4 — System Board ............................................... 53

Connectors and Headers..........................................................................54

Front Panel Header............................................................................54

Floppy Disk Drive Header ..............................................................55

Memory Module (RIMM) Slots .......................................................56

PCI Slots ..............................................................................................57

AGP Slot ..............................................................................................58

IDE Headers........................................................................................59

Power Supply and Aux Power Headers ........................................60

Keyboard and Mouse Ports .............................................................62

USB Ports and USB Header..............................................................63

Ethernet Port ......................................................................................65

Serial , Printer, and i.LINK Ports.....................................................65

Fan Headers .......................................................................................69

Game Port ...........................................................................................70

Headphones, Line In, Mic Jacks.......................................................71

i.LINK Headers ..................................................................................72

CD-IN Header ....................................................................................73

AUX-IN Header .................................................................................74

Video Header......................................................................................75

xiii

CLR CMOS Jumper ...........................................................................76

Chapter 5 — Fax/Modem Card..........................................77

HomePNA Modem...................................................................................78

Connectors .........................................................................................78

Lucent 1648 Modem..................................................................................79

Connectors .........................................................................................79

Chapter 6 — Giga Pocket Card..........................................81

Chapter 7 — Video Card....................................................83

Connectors .................................................................................................84

Chapter 8 — CMOS Setup Options ...................................85

Main Screen ...............................................................................................87

Advanced Screen ......................................................................................89

Power Screen..............................................................................................92

Boot Screen ................................................................................................93

Exit Screen ..................................................................................................94

Chapter 9 — Miscellaneous Technical Information .........95

User and Supervisor Passwords ............................................................96

Beep Code Error Messages .....................................................................97

PCI Configuration Status and Error Messages ....................................98

DMA Channel Assignments .................................................................100

System I/O Address Map .....................................................................101

Memory Map .........................................................................................105

IRQ Summary ..........................................................................................107

Chapter 10 — Specifications............................................109

Processors .............................................................................................109

Chipset ....................................................................................................109

AGP Bus ...................................................................................................109

PCI Bus ....................................................................................................110

Memory Modules ..................................................................................110

Memory Configurations .......................................................................110

L2 Cache ..................................................................................................110

Graphics ..................................................................................................110

VAIO Digital Studio™ System Reference Manual

xiv

Audio .......................................................................................................111

Communications ...................................................................................112

Giga Pocket I/O (PCV-RX490TV only)................................................112

I/O and Expansion Slots .......................................................................112

Floppy Disk Drive and Controller ......................................................113

Hard Drives and Controllers ...............................................................113

Optical Drives..........................................................................................114

System BIOS ...........................................................................................116

Index................................................................................. 117

1

Chapter 1

Identifying Components

The following sections identify and describe each component that is

visible from the exterior of the VAIO Digital Studio™ computer. Internal

components are identified in the appropriate section of this manual.

VAIO Digital Studio™ System Reference Manual

2

Front View

All Models

Identifying Components

3

Drives

PCV-RX462DS/PCV-RX463DS/PCV-RX465DS/PCV-RX470DS/PCV-RX480DS

Drive Description

Floppy disk drive 3.5-inch, 1.44 MB.

DVD-ROM drive

*

* The DVD-ROM data transfer standard 1X rate is 1350 KBps.

CD-RW read

†

DVD-ROM read

‡

CD-R/CD-ROM read

**

† Data on a CD-RW is read at a variable transfer rate, ranging from 13X at the innermost track to 32X at

the outermost track. The average data transfer rate is 22.5X (3375 KBps).

‡ Data on a DVD-ROM is read at a variable transfer rate, ranging from 6.6X at the innermost track to 16X

at the outermost track. The average data transfer rate is 11.3X (15255 KBps).

** Data on a CD-R/CD-ROM is read at a variable transfer rate, ranging from 17.5X at the innermost track to

40X at the outermost track. The average data transfer rate is 28.6X (4293 KBps).

32X maximum performance

16X maximum performance

40X maximum performance

CD-RW drive

††

†† The CD-RW/CD-R/CD-ROM data transfer standard 1X rate is 150 KB per second (KBps).

CD-RW read

‡‡

CD-R/CD-RW write

***

CD-R/CD-ROM read

†††

‡‡ Data on a CD-RW is read at a variable transfer rate, ranging from 8X at the innermost track to 20X at the

outermost track. The average data transfer rate is 14X (2100 KBps).

20X maximum performance

8X maximum performance

32X maximum performance

DVD-ROM drive

CD-RW drive

Floppy disk drive

VAIO Digital Studio™ System Reference Manual

4

PCV-RX490TV

***Data on a CD-R/CD-RW is written at a constant transfer rate of 2X, 4X, 8X (max. for CD-RW), or 12X,

depending on the speed you select.

†††Data on a CD-R/CD-ROM is read at a variable transfer rate, ranging from 13X at the innermost track to

32X at the outermost track. The average data transfer rate is 22.5X (3375 KBps).

Drive Description

Floppy disk drive 3.5-inch, 1.44 MB.

DVD-RW drive

*

* The DVD-ROM data transfer standard 1X rate is 1350 KBps. The CD-RW/CD-R/CD-ROM data transfer

standard rate is 150 KBps.

DVD-ROM read

†

DVD-RW/DVD-R read

‡

CD-ROM read

**

CD-RW/CD-R read

††

CD-R write

CD-RW write

‡‡

DVD-R write

***

DVD-RW write

4X maximum performance

2X maximum performance

24X maximum performance

16X maximum performance

8X maximum performance

4X maximum performance

2X maximum performance

1X maximum performance

CD-ROM drive

CD-R/CD-ROM

†††

CD-RW

‡‡‡

40X maximum performance

28X maximum performance

DVD-RW drive

CD-ROM drive

Floppy disk drive

Identifying Components

5

† Data on a DVD-ROM is read at a variable transfer rate, ranging from 2X at the innermost track to 4X at

the outermost track. The average data transfer rate is 3.3X (4455 KBps).

‡ Data on a DVD-RW/DVD-R is read at a constant transfer rate of 2X.

** Data on a CD-ROM is read at a variable transfer rate, ranging from 10.3X at the innermost track to 24X

at the outermost track. The average data transfer rate is 17.2X (2580 KBps).

†† Data on a CD-RW/CD-R is read at a variable transfer rate, ranging from 6.9X at the innermost track to 16X

at the outermost track. The average data transfer rate is 11.5X (1725 KBps).

‡‡ Data on a CD-RW/CD-R is written at a constant transfer rate of 4X (max for CD-RW), or 8X depending on

the speed you select. High-speed writing to a CD-RW disc is not supported.

***Data on a DVD-RW/DVD-R is written at a constant transfer rate of 1X (max. for DVD-RW), or 2X,

depending on the speed you select.

†††Data on a CD-R/CD-ROM is read at a variable transfer rate, ranging from 17X at the innermost track to

40X at the outermost track. The average data transfer rate is 28.5X (4275 KBps).

‡‡‡Data on a CD-RW is read at a variable transfer rate, ranging from 12X at the innermost track to 28X at

the outermost track. The average data transfer rate is 20X (3000 KBps).

VAIO Digital Studio™ System Reference Manual

6

Buttons and Switches

All Models

Button or switch Description

Power/Stand by switch Turns system power on, off, or into Stand by

mode.

Floppy disk eject button Ejects a floppy disk.

Optical disc eject button Automatically opens and closes the optical drive

tray.

Optical disc eject

Floppy disk eject

Power/Stand by

Page is loading ...

Sony PCV-RX462DS User manual

Sony PCV-RX462DS User manual

Related papers

Other documents