Digicom network adapter User manual

Category
WLAN access points
Type
User manual

This manual is also suitable for

Digicom network adapter

Digicom network adapter is a versatile networking device that can be used in various scenarios to enhance your wireless connectivity. It supports multiple modes of operation, including Access Point, Wireless Bridge (Point-to-Point & Multipoint), and Wireless Client Ethernet.

In Access Point mode, it acts as the central hub for wireless communication, allowing multiple wireless devices to connect and communicate with each other. This mode is ideal for creating a wireless network in your home or office, enabling you to share files, access the internet, and utilize network resources wirelessly.

Digicom network adapter

Digicom network adapter is a versatile networking device that can be used in various scenarios to enhance your wireless connectivity. It supports multiple modes of operation, including Access Point, Wireless Bridge (Point-to-Point & Multipoint), and Wireless Client Ethernet.

In Access Point mode, it acts as the central hub for wireless communication, allowing multiple wireless devices to connect and communicate with each other. This mode is ideal for creating a wireless network in your home or office, enabling you to share files, access the internet, and utilize network resources wirelessly.

MOBILE & WIRELESS
For further information: [email protected] or http://www.digicom.it
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. All other brands, products and trademarks are property of their respective owners.
l 1 Ethernet port 10BaseT
l Access Point mode, Wireless Bridge (PP
& MP) mode and Ethernet Client mode
supported
l IEEE 802.11b 2.4 GHz, 12 channels
Wireless Technology
l Frequency range 2400 - 2497 MHz
l Wireless operating speed: Automatic,
11Mbit/s, 5.5Mbit/s, 2Mbit/s, 1Mbit/s
l Closed space area coverage (depending
on building structure): 25m @ 11 Mbit/s,
100-300m @ 5.5/2/1 Mbit/s
l Minimum reception sensitivity (typical):
-84dBm to 11Mbit/s, -90dBm to 2Mbit/s
l Roaming standard 802.11
l WEP data cryptography 64bit and 128bit
l DSSS Direct Sequence Spread Spectrum
configuration
l External antenna
l Led indicators: Power, LAN, Wireless,
Activity
l Flash upgradable
l SNMP and DHCP Client support
l Wi-Fi and Airport® interoperable
l Power Supply 5Vdc. 1.0A
l Operating temperature: 0-55°C
l Humidity: 10-95% non condensing
l Size: 140 x 89 x 29 mm
l CE Mark
WaveGATE 20.01.2003
Discover the convenience of a Wireless solution!
DESCRIPTION
WaveGATE, Wireless Networking with no barriers
Small size and multifunction, WaveGATE is the most
suitable solution to carry out Wireless LAN for offices
or at home.
WaveGATE is Access Point
WaveGATE is in the center of the Wireless
communications, concentrating the communications of
the Wireless Clients and as Gateway to the wired
LAN.
All the PCs in the LAN, both wired and wireless, will
be able to communicate among them, exchanging
data and documents, to share resources, peripherals
and Internet access.
Thanks to the Roaming function, WaveGATE allows
the complete mobility of the Wireless stations inside a
covered area with multiple Access Points, connected
via Ethernet, without interruption of the connection.
WaveGATE is Bridge
No more problems in taking the wired LAN where it is
not possible to arrive with the UTP cables. For
example consider two buildings inside an industrial
area or two points far from each other in the same
building. Using the Wireless technology it is possible
now to take the LAN where unreachable before. Both
the Point-to-Point Bridge mode (two LANs) and
Multipoint mode are supported (three or more LANS).
WaveGATE is Wireless Client Ethernet
When it is not possible to integrate embedded
equipments, Linux box or other computers in a
Wireless LAN, due to a particular operating system or
for the missing PCMCIA or USB slots, WaveGATE
transforms in WCE mode (Wireless Client Ethernet): it
becomes a Wireless Ethernet card; it is sufficient that
the host has an Ethernet port.
WaveGATE is easy to configure, via LAN or Wireless
network or through a proper Windows® utility.
WaveGATE
The supported DHCP Client functionatily
allows the transparent integration of the
Wireless LAN into a structure of organized
addresses. The use of external antennas
allows to optimize the radio coverage.
Code: 8E4134
  • Page 1 1

Digicom network adapter User manual

Category
WLAN access points
Type
User manual
This manual is also suitable for

Digicom network adapter

Digicom network adapter is a versatile networking device that can be used in various scenarios to enhance your wireless connectivity. It supports multiple modes of operation, including Access Point, Wireless Bridge (Point-to-Point & Multipoint), and Wireless Client Ethernet.

In Access Point mode, it acts as the central hub for wireless communication, allowing multiple wireless devices to connect and communicate with each other. This mode is ideal for creating a wireless network in your home or office, enabling you to share files, access the internet, and utilize network resources wirelessly.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI