Supermicro X9SCV-Q User manual

X9SCV-Q

X9SCV-QV4

USER’S MANUAL

Revision 1.0a

Manual Revision 1.0a

Release Date: September 8, 2011

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document. Information in this document is subject to change without notice.

Other products and companies referred to herein are trademarks or registered trademarks of their

respective companies or mark holders.

Printed in the United States of America

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,

SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE

USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF

THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.

SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED

WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,

INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class B

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

manufacturer’s instruction manual, may cause interference with radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, you are encouraged to try to correct the interference by one

or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

Consult the dealer or an experienced radio/television technician for help.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

iii

Preface

About This Manual

This manual is written for system integrators, PC technicians and

knowledgeable PC users. It provides information for the installation and use of the

X9SCV-Q motherboard product series. This product is intended to be

professionally installed and serviced by a technician.

About This Motherboard

The X9SCV-Q motherboard series is a value-driven product aimed at users who de-

mand a reduced-cost, low-power motherboard for PC or storage server applications.

The X9SCV-Q motherboard series features an Intel® "Sandy Bridge-M" CPU on a

G2 socket. They also offer many features, including two SO-DIMM support, 4 SATA

2.0 ports, 2 SATA 3.0 ports, an on-board VGA, 2 HDMI ports, and an LVDS header

on the X9SCV-QV4. This enables the X9SCV-Q motherboard series to deliver

cost-effective performance in a small form-factor package.

Manual Organization

Chapter 1 describes the features, specications and performance of the mainboard

and provides detailed information about the chipset.

Chapter 2 provides hardware installation instructions. Read this chapter when in-

stalling the processor, memory modules and other hardware components into the

system. If you encounter any problems, see Chapter 3, which describes trouble-

shooting procedures for video, memory and system setup stored in the CMOS.

Chapter 4 includes an introduction to the BIOS and provides detailed information

on running the CMOS Setup utility.

Appendix A provides BIOS Error Beep Codes.

Appendix B lists Driver Installation Instructions.

Appendix C provides the UEFI BIOS Recovery Instructions.

Preface

iv

X9SCV-Q Motherboard Series User’s Manual

Conventions Used in the Manual:

Special attention should be given to the following symbols for proper installation and

to prevent damage done to the components or injury to yourself:

Danger/Caution: Instructions to be strictly followed to prevent catastrophic

system failure or to avoid bodily injury

Warning: Critical information to prevent damage to the components or

data loss.

Important: Important information given to ensure proper system installa-

tion or to relay safety precautions.

Note: Additional Information given to differentiate various models or pro-

vides information for correct system setup.

v

Contacting Supermicro

Headquarters

Address: Super Micro Computer, Inc.

980 Rock Ave.

San Jose, CA 95131 U.S.A.

Tel: +1 (408) 503-8000

Fax: +1 (408) 503-8008

Email: [email protected] (General Information)

[email protected] (Technical Support)

Web Site: www.supermicro.com

Europe

Address: Super Micro Computer B.V.

Het Sterrenbeeld 28, 5215 ML

's-Hertogenbosch, The Netherlands

Tel: +31 (0) 73-6400390

Fax: +31 (0) 73-6416525

Email: [email protected] (General Information)

[email protected] (Technical Support)

[email protected] (Customer Support)

Asia-Pacic

Address: Super Micro Computer, Inc.

4F, No. 232-1, Liancheng Rd.

Chung-Ho 235, Taipei County

Taiwan, R.O.C.

Tel: +886-(2) 8226-3990

Fax: +886-(2) 8226-3991

Web Site: www.supermicro.com.tw

Technical Support:

Email: [email protected]

Tel: 886-2-8226-5990

vi

X9SCV-Q Motherboard Series User’s Manual

Table of Contents

Preface

About This Manual ........................................................................................................ iii

About This Motherboard ................................................................................................ iii

Manual Organization .....................................................................................................iii

Conventions Used in the Manual: .................................................................................iv

Contacting Supermicro ...................................................................................................v

Chapter 1

Introduction

1-1 Overview ......................................................................................................... 1-1

Checklist .......................................................................................................... 1-1

X9SCV-Q Image .......................................................................... 1-2

X9SCV-Q Layout ............................................................................................. 1-3

X9SCV-QV4 Image ..................................................................... 1-4

X9SCV-QV4 Motherboard Layout ................................................................... 1-5

X9SCV-Q / X9SCV-QV4 Quick Reference ..................................................... 1-6

Motherboard Features ..................................................................................... 1-8

X9SCV-Q Motherboard Series Block Diagram ............................................. 1-10

1-2 Chipset Overview ..........................................................................................1-11

1-3 PC Health Monitoring .................................................................................... 1-12

Recovery from AC Power Loss ..................................................................... 1-12

Onboard Voltage Monitoring ........................................................................ 1-12

Fan Status Monitor with Software ................................................................. 1-12

1-4 Power Conguration Settings........................................................................ 1-13

Slow Blinking LED for Suspend-State Indicator ........................................... 1-13

BIOS Support for USB Keyboard.................................................................. 1-13

Main Switch Override Mechanism ................................................................ 1-13

1-5 Power Supply ................................................................................................ 1-13

1-6 Super I/O ....................................................................................................... 1-14

Chapter 2

Installation

2-1 Static-Sensitive Devices .................................................................................. 2-1

Precautions ..................................................................................................... 2-1

Unpacking ....................................................................................................... 2-1

Tools Needed .................................................................................................. 2-2

Location of Mounting Holes ............................................................................ 2-2

vii

Table of Contents

2-2 Motherboard Installation .................................................................................. 2-2

Installation Instructions .................................................................................... 2-3

2-3 System Memory .............................................................................................. 2-4

How to Install SO DIMMs ............................................................................... 2-4

Memory Support .............................................................................................. 2-4

The SO DIMM Socket ..................................................................................... 2-5

2-4 Connectors/I/O Ports ....................................................................................... 2-6

Back Panel Connectors and I/O Ports ............................................................ 2-6

ATX PS/2 Keyboard/Mouse Ports .............................................................. 2-7

Universal Serial Bus (USB) ........................................................................ 2-8

Serial Ports ................................................................................................. 2-9

VGA Connector ........................................................................................ 2-10

LAN Ports ..................................................................................................2-11

HDMI Port ................................................................................................2-11

Front Control Panel ....................................................................................... 2-12

JF1 Header Pins ...................................................................................... 2-12

Front Control Panel Pin Denitions............................................................... 2-13

Power LED .............................................................................................. 2-13

HDD LED .................................................................................................. 2-13

NIC1/NIC2 LED Indicators ....................................................................... 2-13

Overheat (OH)/Fan Fail LED.................................................................... 2-14

Power Fail LED ........................................................................................ 2-14

NMI Button .............................................................................................. 2-14

Reset Button ........................................................................................... 2-15

Power Button ........................................................................................... 2-15

2-5 Connecting Cables ........................................................................................ 2-16

ATX Power Connectors ........................................................................... 2-16

4-pin 12V Power Source .......................................................................... 2-16

Fan Headers ............................................................................................. 2-17

Front Panel Audio Header ........................................................................ 2-18

Chassis Intrusion ..................................................................................... 2-18

SATA DOM Power .................................................................................... 2-19

Power SMB I

2

C Connector ...................................................................... 2-19

SGPIO 1/2 Headers ................................................................................. 2-20

Overheat/Fan Fail LED (JOH1) ................................................................ 2-20

Power LED/Speaker ................................................................................. 2-21

Internal Speaker/Buzzer ........................................................................... 2-21

TPM Header ............................................................................................. 2-22

LVDS header (X9SCV-QV4 only) ............................................................. 2-23

viii

X9SCV-Q Motherboard Series User’s Manual

2-6 Jumper Settings ............................................................................................ 2-24

Explanation of Jumpers ............................................................................ 2-24

LAN Port Enable/Disable ......................................................................... 2-25

SMB (I

2

C) Bus to PCI Slots...................................................................... 2-25

Power Force On Enable/Disable .............................................................. 2-25

CMOS Clear ............................................................................................. 2-26

Legacy Wake-On-LAN Header ................................................................. 2-26

USB Wake-Up .......................................................................................... 2-27

TPM Support Enable ................................................................................ 2-28

Watch Dog Enable/Disable ...................................................................... 2-28

2-7 Onboard Indicators ........................................................................................ 2-29

LAN Port LEDs ......................................................................................... 2-29

Onboard Power LED ................................................................................ 2-30

2-8 Serial ATA and HDD Connections ................................................................. 2-31

SATA Connections (SATA1~SATA6) ........................................................ 2-31

Chapter 3

Troubleshooting

3-1 Troubleshooting Procedures ........................................................................... 3-1

Before Power On ............................................................................................ 3-1

No Power ........................................................................................................ 3-1

No Video ......................................................................................................... 3-1

Memory Errors ............................................................................................... 3-2

If You Lose the System’s Setup Conguration ............................................... 3-2

3-2 Technical Support Procedures ........................................................................ 3-2

3-3 Frequently Asked Questions ........................................................................... 3-3

3-4 Returning Merchandise for Service................................................................. 3-5

Chapter 4

BIOS

4-1 Introduction ...................................................................................................... 4-1

Starting BIOS Setup Utility .............................................................................. 4-1

How To Change the Conguration Data ......................................................... 4-1

How to Start the Setup Utility ......................................................................... 4-2

4-2 Main Setup ...................................................................................................... 4-2

System Overview: The following BIOS information will be displayed: ....... 4-3

System Time/System Date ........................................................................ 4-3

Processor ................................................................................................... 4-3

System Memory ........................................................................................ 4-3

ix

Table of Contents

4-3 Advanced Setup Congurations...................................................................... 4-4



BOOT Feature .............................................................................................. 4-4

Quiet Boot .................................................................................................. 4-4

AddOn ROM Display Mode ........................................................................ 4-4

Bootup Num-Lock ....................................................................................... 4-4

Wait For 'F1' If Error ................................................................................... 4-5

Interrupt 19 Capture ................................................................................... 4-5

Watch Dog Function ................................................................................... 4-5

Power Button Function ............................................................................... 4-5

Restore on AC Power Loss ........................................................................ 4-5



Processor & Clock Options .......................................................................... 4-5

Clock Spread Spectrum ............................................................................. 4-5

Hardware Prefetcher .................................................................................. 4-5

Adjacent Cache Line Prefetch ................................................................... 4-6

Intel® Virtualization Technology ................................................................. 4-6

Execute-Disable Bit Capability (Available when supported by the OS and

the CPU) ..................................................................................................... 4-6

Intel® AES-NI ............................................................................................. 4-6

Intel® Hyper Threading Technology ........................................................... 4-6

Active Processor Cores .............................................................................. 4-6

EIST ............................................................................................................ 4-6

CPU C3 Report, CPU C6 Report ............................................................... 4-7

Turbo Mode ................................................................................................ 4-7



Chipset Conguration ................................................................................... 4-7



CPU Bridge Conguration ............................................................................ 4-7

Memory Frequency .................................................................................... 4-7



System Agent Conguration ......................................................................... 4-7

VT-d ............................................................................................................ 4-7

PEG#0 Gen ................................................................................................ 4-8

Initiate Graphics Adapter ............................................................................ 4-8

GbE Controller ............................................................................................ 4-8

Wake on LAN ............................................................................................. 4-8

USB Functions ........................................................................................... 4-8

Legacy USB Support .................................................................................. 4-8

BIOS EHCI Hand-Off.................................................................................. 4-8

Azalia HD Audio ......................................................................................... 4-8

Azalia Internal HDMI ................................................................................. 4-9

x

X9SCV-Q Motherboard Series User’s Manual



IDE/SATA Conguration ............................................................................... 4-9

SATA Controller(s) ...................................................................................... 4-9

SATA Mode Selection ................................................................................. 4-9

Aggressive LPM Support (AHCI and RAID SATA Mode) .......................... 4-9

Serial ATA Port 0~5 .................................................................................... 4-9

Software Preserve ...................................................................................... 4-9

Hot Plug ...................................................................................................... 4-9

Spin Up Device .......................................................................................... 4-9



PCIe/PCI/PnP Conguration ....................................................................... 4-9

PCI ROM Priority ...................................................................................... 4-10

PCI Latency Timer .................................................................................... 4-10

Active State Power Management ............................................................. 4-10

PCIe Max Read Request Size ................................................................. 4-10

PCIe Slot 1 Option ROM .......................................................................... 4-10

Onboard LAN Option ROM Select ........................................................... 4-10

Load Onboard LAN1/LAN2 Option ROM ................................................. 4-10



Super IO Device Conguration ................................................................. 4-10

Serial Port 1 / Serial Port 2 ...................................................................... 4-10

Serial Port 1 ~ 2 Settings ..........................................................................4-11



Remote Access Conguration ....................................................................4-11

Bits per Second (BPS) ............................................................................. 4-12

Flow Control ............................................................................................. 4-12



Hardware Health Conguration ........................................................4-12

Fan Speed Control Mode ......................................................................... 4-12

CPU Temperature ..................................................................................... 4-12

PCH, System, Peripheral Temperature .................................................... 4-13

Fan 1 ~ 3 Speed ...................................................................................... 4-13

Vcore_CPU, VCC_SA, VCore_GFX, 5VCC, 12V, 3.3VCC, 3VSB, and VBAT

4-13



ACPI Conguration ..................................................................................... 4-13

High Precision Event Timers .................................................................... 4-13

Suspend Mode ......................................................................................... 4-14

PS/2 KB/MS Wake Up ............................................................................. 4-14



Trusted Computing Conguration .............................................................. 4-14

TPM Support ............................................................................................ 4-14

TPM State ................................................................................................ 4-14



Intel TXT(LT) Conguration ........................................................................ 4-15

Secure Mode Extensions (SMX) .............................................................. 4-15

xi

Intel TXT (LT) Support .............................................................................. 4-15

AMT Conguration ..................................................................................... 4-15

AMT .......................................................................................................... 4-15

Un-Congure AMT/ME ............................................................................. 4-15

WatchDog Timer ....................................................................................... 4-15

4-4 Event Logs .................................................................................................... 4-16

Smbios Event Log .................................................................................... 4-16

Erase Event Log ....................................................................................... 4-16

When Log is Full ...................................................................................... 4-16

MECI ......................................................................................................... 4-16

METW ....................................................................................................... 4-16

4-5 Security Settings ........................................................................................... 4-17

Administrator Password .......................................................................... 4-17

User Password: ........................................................................................ 4-17

Boot Sector Virus Protection .................................................................... 4-17

4-6 Boot Settings ................................................................................................ 4-18

Setup Prompt Timeout ............................................................................. 4-18

Boot Option #1, Boot option #2, Boot Option #3, etc .............................. 4-18

Hard Disk Drives ...................................................................................... 4-18

4-7 Exit Options ................................................................................................... 4-19

Save Changes and Exit ........................................................................... 4-19

Discard Changes and Exit ...................................................................... 4-19

Discard Changes ...................................................................................... 4-19

Restore Defaults ....................................................................................... 4-19

Save As User Defaults ............................................................................. 4-20

Restore User Defaults .............................................................................. 4-20

Boot Override ........................................................................................... 4-20

Launch EFI Shell from lesystem device ................................................. 4-20

Appendix A

POST Error Beep Codes

Recoverable POST Error Beep Codes ......................................................................A-1

Appendix B

Software Installation Instructions

B-1 Installing Drivers ..............................................................................................B-1

B-2 Conguring Supero Doctor III .........................................................................B-2

Table of Contents

xii

X9SCV-Q Motherboard Series User’s Manual

Notes

Chapter 1: Introduction

1-1

Chapter 1

Introduction

1-1 Overview

Checklist

Congratulations on purchasing your computer motherboard from an acknowledged

leader in the industry. Supermicro boards are designed with the utmost attention to

detail and to provide you with the highest standards in quality and performance.

Please check that the following items have all been included with your motherboard.

If anything listed here is damaged or missing, contact your retailer.

All the following items are included in the retail box only.

•One (1) Supermicro Mainboard

•Two (2) SATA cables

•One (1) I/O shield

•One (1) Supermicro CD containing drivers and utilities

•One (1) User's/BIOS Manual

1-2

X9SCV-Q Motherboard Series User's Manual

X9SCV-Q Image

Note: All graphics and images shown in this manual were based upon the latest

PCB Revision available at the time of publishing of the manual. The motherboard

you've received may or may not look exactly the same as the image shown in

this manual.

Chapter 1: Introduction

1-3

X9SCV-Q Layout

Important Notes to the User

•Jumpers not indicated are for testing only.

•See Chapter 2 for detailed information on jumpers, I/O ports and JF1 front

panel connections.

•" " indicates the location of "Pin 1".

1-4

X9SCV-Q Motherboard Series User's Manual

X9SCV-QV4 Image

Note: All graphics and images shown in this manual were based upon the latest

PCB Revision available at the time of publishing of the manual. The motherboard

you've received may or may not look exactly the same as the image shown in

this manual.

Chapter 1: Introduction

1-5

X9SCV-QV4 Motherboard Layout

Important Notes to the User

•Jumpers not indicated are for testing only.

•See Chapter 2 for detailed information on jumpers, I/O ports and JF1 front

panel connections.

•" " indicates the location of "Pin 1".

1-6

X9SCV-Q Motherboard Series User's Manual

X9SCV-Q / X9SCV-QV4 Quick Reference

(not drawn to scale)

JPT1

J1

SLOT1

JWD1

JI2C1

JI2C2

JBT1

JOH1

LED1

SP1

JL1

JPF1

JP1

JD1

TPM1

J9

JWF1

JUSB1

I-SATA6 I-SATA3

I-SATA5 I-SATA2

I-SATA4 I-SATA1

J5

J7

JP2

JP3

JPUSB1

JF1

JPI2C

J16

J12

FAN2

FAN3

PS/2 (TOP)

J8

COM1 (TOP)

VGA

LAN1

LAN2

U14

U20

JPL2

JPL1

FAN1

CPU

SODIMM1

SODIMM2

Jumper Description Default Setting

JBT1 CMOS Clear

(See Chapter 2)

JWD1 Watch Dog Timer

Pins 1-2 (Reset)

JI2C1/JI2C2 SMB to PCI Slots (See Chapter 2)

JPF1 Power Force On Open (Disabled)

JPL1/JPL2 LAN1/LAN2 Enable Pins 1-2 (Enabled)

JPUSB1 USB Wake-up Pins 1-2 (Enabled)

JWOL Wake On LAN Pins 1-2 (Enabled)

JPT1 Trusted Platform Module (TPM) Enable Pins 1-2 (Enabled)

Jumper Descriptions

JWOL

Note*: On the X9SCV-QV4 motherboard, JP2 & JP3 are replaced with an LVDS header.

LVDS: See Note*

Chapter 1: Introduction

1-7

Connectors/LED Description

J1 Front Panel Audio Header

LED1 Power LED

SLOT1

PCI-E x16 Gen 2 Slot

JOH1 Overheat LED

SP1 Onboard Speaker/Buzzer

JD1 Power LED/Speaker Header

TPM1 TPM Header

J9 4-pin 12V Power Source for internal Hard Drive/DVD Drive

JWF1 DOM Power Connector

I-SATA1~I-SATA6 SATA Connectors (White connectors: SATA 3, Black: SATA 2)

JF1 Front Panel Control Header

J16 4-Pin ATX Power Connector (X9SCV-QV4 Only)

J12 24-Pin ATX Power Connector (X9SCV-Q Only)

FAN2, FAN3, FAN1 CPU Fan, System Fan and Auxilliary Fan Headers

JL1 Chassic Intrusion Header

PS/2 PS/2 Mouse and Keyboard Combo Back Panel Connector

J8, U20 USB4/5, USB0~3 Back Panel Connectors

COM1, JP1 (COM2) COM1 Back Panel Serial Port, COM2 Internal Serial Header

VGA VGA Back Panel Port

LAN1/LAN2 LAN1/LAN2 Back Panel Ports

U14 HDMI1 (Top), HDMI2 Back Panel Ports

JPI2C JPI2C, PWR supply (I2C) System Management Bus

JUSB1 USB12 (Type A Internal USB Ports)

J7, J5 USB10/11, USB6/7 Internal USB Headers

JP2, JP3 or LVDS

X9SCV-Q: SGPIO 1, SGPIO 2, Serial General Purpose I/O headers

X9SCV-QV4: LVDS header

SODIMM1/SODIMM2 SODIMM Memory Sockets

CPU CPU / Processor

Ports and Connectors

1-8

X9SCV-Q Motherboard Series User's Manual

Motherboard Features

CPU Single Intel® Sandy Bridge-M CPU (Socket G2)

Memory Two (2) SO-DIMM slots support up to 16 GB of DDR3, un-

buffered, 1066/1333 MHz, non-ECC SO-DIMM memory

Supports dual-channel memory bus

DIMM sizes

SO-DIMM 1 GB, 2 GB, 4 GB and 8GB

Chipset Intel® QM67 (3.9W)

Expansion Slots One (1) PCI-E x 16, Gen 2 Slot

Graphics Intel (Integrated)

Network Connections Two (2): One (1) Intel 82579LM and One (1) Intel 82574L

Two (2) RJ-45 Rear IO Panel Connectors with Link and

Activity LEDs

I/O Devices SATA Connections

SATA 3.0 Ports Two (2) (SATA 1/2)

RAID 0, 1 Support

SATA 2.0 Ports Four (4) (SATA 3~6)

RAID 0, 1, 5, 10

USB Devices

Six (6) USB ports on the rear I/O panel (USB 0~5)

Five (5) USB connectors for front access USB 12 (Type A)

and USB6/7, USB10/11 (USB headers).

HDMI Ports

Two (2) Back panel HDMI ports

LVDS Header

One (1) LVDS Header (X9SCV-QV4 Only)

Graphics

One (1) Back panel VGA port

Audio Devices

One (1) Front Audio Mic/Headphone Header

Keyboard/Mouse

Combination PS/2 Keyboard/Mouse port on the I/O

backpanel

Serial (COM) Ports

Two (2) Fast UART 16550 connections: one 9-pin RS-232

port (Backpanel COM1 port) and one header (COM2)

Page is loading ...

Supermicro X9SCV-Q User manual

Supermicro X9SCV-Q User manual

Related papers

Other documents