16
EN
2 Perform the network installation.
1), Press .
2), Select [Setup], and press OK.
3), Select [Network] > [Network Installation], and press OK.
4), Follow the instructions on the TV screen to complete the installation. If necessary, use the
Alphanumeric buttons on the remote control to enter a password.
Caution
Before you connect to a network, familiarize yourself with the network router, media server software for
DLNA, and networking principles. If necessary, read documentation accompanying network components.
Philips is not responsible for lost, damaged, or corrupt data.
iPhone
storage device in this player.
What you need
Download the smartphone control application for Philips from the iTunes store to your iPhone.
Connect your iPhone to the same home network (see the user manual of the iPhone for
details).
iPhone control
1 Insert a disc or USB storage device into this player.
2 On the iPhone screen, tap the smartphone control icon.
If the control icon is not displayed, download the smartphone control application for Philips
to the iPhone.
After a search, the name of this player is displayed.
3 Select this player from the iPhone screen.
» The iPhone used as a remote control for this player is enabled.
» The control buttons are displayed on the iPhone screen, and control functions can vary from
play modes.
4 From the iPhone screen, touch the source tab, and then select the DISC or USB option.
» The folders in the disc or USB storage device are displayed.
5
6 Tap the control buttons on the iPhone screen to control the play.
To exit the application, press the home button on the iPhone.