WARRIOR Item 57383-UPC 792363573832 Owner's manual

!"#"$%&'(%)*+#"$*%,$-%.$$/-00)))1.,(+&(2(*"3.$14&5

65,"7%&'(%$*4.8"4,7%#'//&($%,$-%/(&9'4$#'//&($:.,(+&(2(*"3.$14&5

Owner’s Manual & Safety Instructions

Save This Manual Keep this manual for the safety warnings and precautions, assembly,

operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the

back of the manual near the assembly diagram (or month and year of purchase if product has no number).

Keep this manual and the receipt in a safe and dry place for future reference. 20h

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-888-866-5797 as soon as possible.

2020 by Harbor Freight Tools

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

Tools required for assembly an d se rv ic e may n ot b e in cl uded.

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

Page 2 ;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1 Item 57383

EF;6GH IJ6KFGLIM NFLMG6MFMO6E6GPJ

G,+7*%&2%O&8$*8$#

Safety ......................................................... 2

Specifications ............................................. 7

Setup .......................................................... 8

Operation ................................................... 10

Maintenance .............................................. 12

Parts List and Diagram .............................. 14

Warranty .................................................... 16

QFKMLMR%EHNSITE%FMU%U6;LMLGLIME

This is the safety alert symbol. It is used to alert you to potential

personal injury hazards. Obey all safety messages that

follow this symbol to avoid possible injury or death.

Indicates a hazardous situation which, if not avoided,

will result in death or serious injury.

Indicates a hazardous situation which, if not avoided,

could result in death or serious injury.

Indicates a hazardous situation which, if not avoided,

could result in minor or moderate injury.

Addresses practices not related to personal injury.

LNJIKGFMG%EF;6GH%LM;IKNFGLIM

R*8*(,7%J&)*(%G&&7%E,2*$V%Q,(8"83#

K*,9%,77%#,2*$V%),(8"83#=%"8#$('4$"&8#=%"77'#$(,$"&8#%,89%#/*4"2"4,$"&8#%/(&W"9*9%)"$.%$."#%/&)*(%$&&71%

Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.

E,W*%,77%),(8"83#%,89%"8#$('4$"&8#%2&(%2'$'(*%(*2*(*84*1

The term “power tool” in the warnings refers to your mains-operated (corded)

power tool or battery-operated (cordless) power tool.

1. Q&(X%,(*,%#,2*$V

a. Y**/%)&(X%,(*,%47*,8%,89%)*77%7"$1%

Cluttered or dark areas invite accidents.

b. U&%8&$%&/*(,$*%/&)*(%$&&7#%"8%*Z/7&#"W*%

,$5&#/.*(*#=%#'4.%,#%"8%$.*%/(*#*84*%&2%

27,55,+7*%7"<'"9#=%3,#*#%&(%9'#$1%Power tools

create sparks which may ignite the dust or fumes.

c. Y**/%4."79(*8%,89%+V#$,89*(#%,),V%

)."7*%&/*(,$"83%,%/&)*(%$&&71%Distractions

can cause you to lose control.

Page 3;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1Item 57383

EF;6GHIJ6KFGLIMNFLMG6MFMO6 E6GPJ

2. 67*4$("4,7%#,2*$V

a. J&)*(%$&&7%/7'3#%5'#$%5,$4.%$.*%&'$7*$1%

M*W*(%5&9"2V%$.*%/7'3%"8%,8V%),V1%U&%8&$%'#*%

,8V%,9,/$*(%/7'3#%)"$.%*,($.*9%[3(&'89*9\%

/&)*(%$&&7#1%Unmodified plugs and matching

outlets will reduce risk of electric shock.

b. FW&"9%+&9V%4&8$,4$%)"$.%*,($.*9%&(%

3(&'89*9%#'(2,4*#=%#'4.%,#%/"/*#=%

(,9",$&(#=%(,83*#%,89%(*2("3*(,$&(#1%

There is an increased risk of electric shock

if your body is earthed or grounded.

c. U&%8&$%*Z/&#*%/&)*(%$&&7#%$&%(,"8%&(%)*$%

4&89"$"&8#1%Water entering a power tool

will increase the risk of electric shock.

d. U&%8&$%,+'#*%$.*%4&(91%M*W*(%'#*%$.*%4&(9%

2&(%4,((V"83=%/'77"83%&(%'8/7'33"83%$.*%/&)*(%

$&&71%Y**/%4&(9%,),V%2(&5%.*,$=%&"7=%#.,(/%

*93*#%&(%5&W"83%/,($#1%Damaged or entangled

cords increase the risk of electric shock.

e. Q.*8%&/*(,$"83%,%/&)*(%$&&7%&'$9&&(#=%

'#*%,8%*Z$*8#"&8%4&(9%#'"$,+7*%2&(%&'$9&&(%

'#*1%Use of a cord suitable for outdoor

use reduces the risk of electric shock.

f. L2%&/*(,$"83%,%/&)*(%$&&7%"8%,%9,5/%7&4,$"&8%

"#%'8,W&"9,+7*=%'#*%,%3(&'89%2,'7$%4"(4'"$%

"8$*(('/$*(%[R;OL\%/(&$*4$*9%#'//7V1%Use of

a GFCI reduces the risk of electric shock.

3. J*(#&8,7%#,2*$V

a. E$,V%,7*($=%),$4.%).,$%V&'%,(*%9&"83%,89%

'#*%4&55&8%#*8#*%).*8%&/*(,$"83%,%

/&)*(%$&&71%U&%8&$%'#*%,%/&)*(%$&&7%)."7*%

V&'%,(*%$"(*9%&(%'89*(%$.*%"827'*84*%&2%

9('3#=%,74&.&7%&(%5*9"4,$"&81%%A moment

of inattention while operating power tools

may result in serious personal injury.

b. P#*%/*(#&8,7%/(&$*4$"W*%*<'"/5*8$1%F7),V#%

)*,(%*V*%/(&$*4$"&81%%Protective equipment

such as dust mask, non-skid safety shoes, hard

hat, or hearing protection used for appropriate

conditions will reduce personal injuries.

c. J(*W*8$%'8"8$*8$"&8,7%#$,($"831%68#'(*%$.*%

#)"$4.%"#%"8%$.*%&22?/&#"$"&8%+*2&(*%4&88*4$"83%

$&%/&)*(%#&'(4*%,890&(%+,$$*(V%/,4X=%/"4X"83%

'/%&(%4,((V"83%$.*%$&&71%Carrying power tools

with your finger on the switch or energizing power

tools that have the switch on invites accidents.

d. K*5&W*%,8V%,9]'#$"83%X*V%&(%)(*84.%

+*2&(*%$'(8"83%$.*%/&)*(%$&&7%&81%%A wrench

or a key left attached to a rotating part of the

power tool may result in personal injury.

e. U&%8&$%&W*((*,4.1%Y**/%/(&/*(%2&&$"83%,89%

+,7,84*%,$%,77%$"5*#1 This enables better control

of the power tool in unexpected situations.

f. U(*##%/(&/*(7V1%U&%8&$%)*,(%7&&#*%47&$."83%

&(%]*)*7(V1%Y**/%V&'(%.,"(=%47&$."83%

,89%37&W*#%,),V%2(&5%5&W"83%/,($#1%%

Loose clothes, jewelry or long hair

can be caught in moving parts.

g. L2%9*W"4*#%,(*%/(&W"9*9%2&(%$.*%4&88*4$"&8%

&2%9'#$%*Z$(,4$"&8%,89%4&77*4$"&8%

2,4"7"$"*#=%*8#'(*%$.*#*%,(*%4&88*4$*9%

,89%/(&/*(7V%'#*91%%Use of dust collection

can reduce dust-related hazards.

h. U&%8&$%7*$%2,5"7",("$V%3,"8*9%2(&5%2(*<'*8$%

'#*%&2%$&&7#%,77&)%V&'%$&%+*4&5*%

4&5/7,4*8$%,89%"38&(*%$&&7%#,2*$V%

/("84"/7*#1%%A careless action can cause

severe injury within a fraction of a second.

i. Only use safety equipment that has been

approved by an appropriate standards agency.

Unapproved safety equipment may not provide

adequate protection. Eye protection must be

ANSI-approved and breathing protection

must be NIOSH-approved for the

specific hazards in the work area.

j. Do not lay the tool down until it has come to

a complete stop. Moving parts can grab the

surface and pull the tool out of your control.

k. When using a handheld power tool,

maintain a firm grip on the tool with

both hands to resist starting torque.

l. Do not leave the tool unattended when the

Battery Pack is connected. Turn off the tool,

and remove the Battery Pack before leaving.

m. This product is not a toy.

Keep it out of reach of children.

n. People with pacemakers should consult their

physician(s) before use. Electromagnetic fields in

close proximity to heart pacemaker could cause

pacemaker interference or pacemaker failure.

o. The warnings, precautions, and instructions

discussed in this instruction manual cannot

cover all possible conditions and situations

that may occur. It must be understood by the

operator that common sense and caution are

factors which cannot be built into this product,

but must be supplied by the operator.

4. J&)*(%$&&7%'#*%,89%4,(*

a. U&%8&$%2&(4*%$.*%/&)*(%$&&71%P#*%$.*%4&((*4$%

/&)*(%$&&7%2&(%V&'(%,//7"4,$"&81%%The correct

power tool will do the job better and safer

at the rate for which it was designed.

b. U&%8&$%'#*%$.*%/&)*(%$&&7%"2%$.*%#)"$4.%

9&*#%8&$%$'(8%"$%&8%,89%&221%%Any power

tool that cannot be controlled with the switch

is dangerous and must be repaired.

Page 4 ;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1 Item 57383

EF;6GH IJ6KFGLIM NFLMG6MFMO6E6GPJ

c. U"#4&88*4$%$.*%/7'3%2(&5%$.*%/&)*(%

#&'(4*%,890&(%(*5&W*%$.*%+,$$*(V%/,4X=%

"2%9*$,4.,+7*=%2(&5%$.*%/&)*(%$&&7%+*2&(*%

5,X"83%,8V%,9]'#$5*8$#=%4.,83"83%

,44*##&("*#=%&(%#$&("83%/&)*(%$&&7#1%%

Such preventive safety measures reduce the

risk of starting the power tool accidentally.

d. E$&(*%"97*%/&)*(%$&&7#%&'$%&2%$.*%(*,4.%&2%

4."79(*8%,89%9&%8&$%,77&)%/*(#&8#%'82,5"7",(%

)"$.%$.*%/&)*(%$&&7%&(%$.*#*%"8#$('4$"&8#%

$&%&/*(,$*%$.*%/&)*(%$&&71%%Power tools are

dangerous in the hands of untrained users.

e. N,"8$,"8%/&)*(%$&&7#%,89%,44*##&("*#1%

O.*4X%2&(%5"#,7"385*8$%&(%+"89"83%&2%5&W"83%

/,($#=%+(*,X,3*%&2%/,($#%,89%,8V%&$.*(%

4&89"$"&8%$.,$%5,V%,22*4$%$.*%/&)*(%$&&7^#%

&/*(,$"&81%L2%9,5,3*9=%.,W*%$.*%/&)*(%$&&7%

(*/,"(*9%+*2&(*%'#*1%%Many accidents are

caused by poorly maintained power tools.

f. Y**/%4'$$"83%$&&7#%#.,(/%,89%47*,81%%Properly

maintained cutting tools with sharp cutting edges

are less likely to bind and are easier to control.

g. P#*%$.*%/&)*(%$&&7=%,44*##&("*#%,89%$&&7%+"$#%

*$41%"8%,44&(9,84*%)"$.%$.*#*%"8#$('4$"&8#=%

$,X"83%"8$&%,44&'8$%$.*%)&(X"83%4&89"$"&8#%

,89%$.*%)&(X%$&%+*%/*(2&(5*91%%Use of the

power tool for operations different from those

intended could result in a hazardous situation.

h. Y**/%.,897*#%,89%3(,#/"83%#'(2,4*#%

9(V=%47*,8%,89%2(**%2(&5%&"7%,89%3(*,#*1%%

Slippery handles and grasping surfaces

do not allow for safe handling and control

of the tool in unexpected situations.

5. E*(W"4*

a. _,W*%V&'(%/&)*(%$&&7%#*(W"4*9%+V%,%

<',7"2"*9%(*/,"(%/*(#&8%'#"83%&87V%"9*8$"4,7%

(*/7,4*5*8$%/,($#1%%This will ensure that

the safety of the power tool is maintained.

b. Maintain labels and nameplates on the tool.

These carry important safety information.

If unreadable or missing, contact

Harbor Freight Tools for a replacement.

6. S,$$*(V%$&&7%'#*%,89%4,(*

a. J(*W*8$%'8"8$*8$"&8,7%#$,($"831%Ensure the

switch is in the off-position before connecting

to battery pack, picking up or carrying the

power tool. Carrying the power tool with your

finger on the switch or energizing power tool

that have the switch on invites accidents.

b. U"#4&88*4$%$.*%+,$$*(V%/,4X%2(&5%$.*%

/&)*(%$&&7%+*2&(*%5,X"83%,8V%,9]'#$5*8$#=%

4.,83"83%,44*##&("*#=%&(%#$&("83%/&)*(%

$&&71%Such preventive safety measures reduce

the risk of starting the power tool accidentally.

c. K*4.,(3*%&87V%)"$.%$.*%4.,(3*(%#/*4"2"*9%+V%

$.*%5,8'2,4$'(*(1%A charger that is suitable

for one type of battery pack may create a risk

of fire when used with another battery pack.

d. P#*%/&)*(%$&&7#%&87V%)"$.%#/*4"2"4,77V%

9*#"38,$*9%+,$$*(V%/,4X#1%Use of any other

battery packs may create a risk of injury and fire.

e. Q.*8%+,$$*(V%/,4X%"#%8&$%"8%'#*=%X**/%"$%,),V%

2(&5%&$.*(%5*$,7%&+]*4$#=%7"X*%/,/*(%47"/#=%

4&"8#=%X*V#=%8,"7#=%#4(*)#%&(%&$.*(%#5,77%5*$,7%

&+]*4$#=%$.,$%4,8%5,X*%,%4&88*4$"&8%2(&5%

&8*%$*(5"8,7%$&%,8&$.*(1%Shorting the battery

terminals together may cause burns or a fire.

f. P89*(%,+'#"W*%4&89"$"&8#=%7"<'"9%5,V%+*%

*]*4$*9%2(&5%$.*%+,$$*(V`%,W&"9%4&8$,4$1%

If contact accidentally occurs, flush with

water. If liquid contacts eyes, additionally

seek medical help. Liquid ejected from the

battery may cause irritation or burns.

g. U&%8&$%'#*%,%+,$$*(V%/,4X%&(%/&)*(%$&&7%$.,$%

"#%9,5,3*9%&(%5&9"2"*91%Damaged or modified

batteries may exhibit unpredictable behavior

resulting in fire, explosion or risk of injury.

h. U&%8&$%*Z/&#*%,%+,$$*(V%/,4X%&(%/&)*(%

$&&7%$&%2"(*%&(%*Z4*##"W*%$*5/*(,$'(*1%

Exposure to fire or temperature above

265°F may cause explosion.

i. ;&77&)%,77%4.,(3"83%"8#$('4$"&8#%,89%9&%

8&$%4.,(3*%$.*%+,$$*(V%/,4X%&(%/&)*(%$&&7%

&'$#"9*%&2%$.*%$*5/*(,$'(*%(,83*%#/*4"2"*9%

"8%$.*%"8#$('4$"&8#1%Charging improperly or at

temperatures outside of the specified range may

damage the battery and increase the risk of fire.

j. _,W*%#*(W"4"83%/*(2&(5*9%+V%,%<',7"2"*9%

(*/,"(%/*(#&8%'#"83%&87V%"9*8$"4,7%

(*/7,4*5*8$%/,($#1%This will ensure that

the safety of the product is maintained.

k. U&%8&$%5&9"2V%&(%,$$*5/$%$&%(*/,"(%$.*%/&)*(%

$&&7%&(%$.*%+,$$*(V%/,4X%*Z4*/$%,#%"89"4,$*9%

"8%$.*%"8#$('4$"&8#%2&(%'#*%,89%4,(*1

l. The battery Charger gets hot

during use. The Charger’s heat

can build up to unsafe levels and

create a fire hazard if it does not

receive adequate ventilation, due to an electrical

fault, or if it is used in a hot environment. Do

not place the Charger on a flammable surface.

Do not obstruct any vents on the Charger.

6#/*4",77V%,W&"9%/7,4"83%$.*%O.,(3*(%

&8%4,(/*$#%,89%('3#`%$.*V%,(*%8&$%&87V%

27,55,+7*=%+'$%$.*V%,7#&%&+#$('4$%W*8$#%'89*(%

$.*%O.,(3*(1%%Place the Charger on a stable,

solid, nonflammable surface (such as a stable

metal workbench or concrete floor) at least 1

foot away from all flammable objects, such as

drapes or walls. Keep a fire extinguisher and a

smoke detector in the area. Frequently monitor

the Charger and Battery Pack while charging.

Page 5;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1Item 57383

EF;6GHIJ6KFGLIMNFLMG6MFMO6 E6GPJ

7. T"$."'5%S,$$*(V%E,2*$V%Q,(8"83#

TLG_LPN%SFGG6KL6E%EGIK6%

F%TFKR6%FNIPMG%I;%6M6KRH%FMU%%

QLTT%!6MG%;LK6%IK%6aJTIU6%

L;%NLEGK6FG6U-

a. Y**/%S,$$*(V%J,4X%9(V1

b. UI%MIG%UI%FMH%I;%G_6%;ITTIQLMR%

GI%G_6%SFGG6KH%JFOY-

b% I/*8=

b% U(&/=

b% E.&($?4"(4'"$=

b% J'84$'(*=

b% L84"8*(,$*=%&(

b% 6Z/&#*%$&%$*5/*(,$'(*#%3(*,$*(%$.,8%cABd;1

c. Charge Battery Pack only according

to its Charger’s instructions.

d. Inspect Battery Pack before every use;

do not use or charge if damaged.

8. E,2*$V%"8#$('4$"&8#%2&(%,77%&/*(,$"&8#

a. P#*%$.*%,'Z"7",(V%.,897*[#\1%Loss of

control can cause personal injury.

b. S(,4*%$.*%$&&7%/(&/*(7V%+*2&(*%'#*1%This

tool produces a high output torque and without

properly bracing the tool during operation, loss

of control may occur resulting in personal injury.

c. _&79%$.*%/&)*(%$&&7%+V%"8#'7,$*9%3("//"83%

#'(2,4*#=%).*8%/*(2&(5"83%,8%&/*(,$"&8%

).*(*%$.*%4'$$"83%,44*##&(V%&(%2,#$*8*(#%

5,V%4&8$,4$%."99*8%)"("83%&(%"$#%&)8%4&(91%

Cutting accessory contacting a “live” wire may

make exposed metal parts of the power tool “live”

and could give the operator an electric shock.

d. Let bit cool before touching, changing

or adjusting it. Bits heat up dramatically

while in use, and can burn you.

e. If the drill bit jams, release the

Trigger immediately; drill torque

can cause injury or break bit.

9. E,2*$V%L8#$('4$"&8#%).*8%'#"83%7&83%9("77%+"$#

a. M*W*(%&/*(,$*%,$%."3.*(%#/**9%$.,8%$.*%

5,Z"5'5%#/**9%(,$"83%&2%$.*%9("77%+"$1%

At higher speeds, the bit is likely to bend if

allowed to rotate freely without contacting

the workpiece, resulting in personal injury.

b. F7),V#%#$,($%9("77"83%,$%7&)%#/**9%,89%)"$.%

$.*%+"$%$"/%"8%4&8$,4$%)"$.%$.*%)&(X/"*4*1%

At higher speeds, the bit is likely to bend if

allowed to rotate freely without contacting

the workpiece, resulting in personal injury.

c. F//7V%/(*##'(*%&87V%"8%9"(*4$%7"8*%)"$.%$.*%

+"$%,89%9&%8&$%,//7V%*Z4*##"W*%/(*##'(*1%%

Bits can bend causing breakage or loss

of control, resulting in personal injury.

10. !"+(,$"&8%E,2*$V

This tool vibrates during use.

Repeated or long-term exposure to vibration may

cause temporary or permanent physical injury,

particularly to the hands, arms and shoulders.

To reduce the risk of vibration-related injury:

a. Anyone using vibrating tools regularly or for

an extended period should first be examined

by a doctor and then have regular medical

check-ups to ensure medical problems are not

being caused or worsened from use. Pregnant

women or people who have impaired blood

circulation to the hand, past hand injuries,

nervous system disorders, diabetes, or

Raynaud’s Disease should not use this tool.

If you feel any symptoms related to

vibration (such as tingling, numbness,

and white or blue fingers), seek medical

advice as soon as possible.

b. Do not smoke during use. Nicotine reduces

the blood supply to the hands and fingers,

increasing the risk of vibration-related injury.

c. Wear suitable gloves to reduce the

vibration effects on the user.

d. Use tools with the lowest vibration

when there is a choice.

e. Include vibration-free periods each day of work.

f. Grip tool as lightly as possible (while still keeping

safe control of it). Let the tool do the work.

g. To reduce vibration, maintain the tool as

explained in this manual. If any abnormal

vibration occurs, stop use immediately.

Page 6 ;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1 Item 57383

EF;6GH IJ6KFGLIM NFLMG6MFMO6E6GPJ

R(&'89"83

GI%JK6!6MG%6T6OGKLO%E_IOY%FMU%U6FG_%;KIN%LMOIKK6OG%RKIPMULMR-%

O.*4X%)"$.%,%<',7"2"*9%*7*4$("4",8%"2%V&'%,(*%"8%9&'+$%,#%$&%).*$.*(%$.*%&'$7*$%"#%/(&/*(7V%

3(&'89*91%%U&%8&$%5&9"2V%$.*%/&)*(%4&(9%/7'3%/(&W"9*9%)"$.%$.*%4.,(3*(1%%U&%8&$%'#*%$.*%4.,(3*(%

"2%$.*%/&)*(%4&(9%&(%/7'3%"#%9,5,3*91%%L2%9,5,3*9=%.,W*%"$%(*/,"(*9%+V%,%#*(W"4*%2,4"7"$V%+*2&(*%

'#*1%%L2%$.*%/7'3%)"77%8&$%2"$%$.*%&'$7*$=%.,W*%,%/(&/*(%&'$7*$%"8#$,77*9%+V%,%<',7"2"*9%*7*4$("4",81

6Z$*8#"&8%O&(9#

M&$*- Extension cords must not be used with this item’s Charger.

EV5+&7&3V

Double Insulated

Volts

Alternating Current

Amperes

xxxx/min.

No Load Revolutions per Minute (RPM)

WARNING marking concerning Risk

of Eye Injury. Wear ANSI-approved

safety goggles with side shields.

Read the manual before

set-up and/or use.

WARNING marking

concerning Risk of Fire.

Do not cover Charger

ventilation ducts.

Charge on fireproof surface only.

WARNING marking concerning

Risk of Electric Shock.

Properly connect Charger’s power

cord to appropriate outlet.

WARNING marking concerning

Risk of Explosion.

Do not puncture, short, or open

battery packs and do not charge

damaged battery packs.

Page 7;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1Item 57383

EF;6GHIJ6KFGLIMNFLMG6MFMO6 E6GPJ

E/*4"2"4,$"&8#

Charger Input Rating 120VAC / 60Hz / 0.4A

Battery Rating 12V / 1.3 mAh

Battery Type Li-ion

No Load Speed 0-550 RPM

Chuck Size 3/8 in

Page 8 ;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1 Item 57383

EF;6GH IJ6KFGLIM NFLMG6MFMO6E6GPJ

E*$'/%?%S*2&(*%P#*-

%K*,9%$.*%6MGLK6%LNJIKGFMG%EF;6GH%LM;IKNFGLIM%#*4$"&8%,$%$.*%+*3"88"83%&2%$."#%

5,8',7%"847'9"83%,77%$*Z$%'89*(%#'+.*,9"83#%$.*(*"8%+*2&(*%#*$%'/%&(%'#*%&2%$."#%/(&9'4$1

M&$*- For additional information regarding the parts listed in the

following pages, refer to Parts List and Diagram on page 14.

O.,(3"83

1. Place the Battery Pack on a dry fireproof surface in

a room where the temperature is from 50–104° F.

M&$*- If recharging a newly spent Battery Pack,

allow it to cool completely before charging.

2. Examine the Battery Pack. It must be

undamaged, and a Li-ion type Battery Pack.%%

U&%8&$%4.,(3*%,%4(,4X*9=%&/*8=%&(%

7*,X"83%S,$$*(V%J,4X=%&(%4.,(3*%,%

8&8?(*4&55*89*9%$V/*%&2%S,$$*(V%J,4X1

3. The Battery Pack’s terminals are designed to fit

this Charger specifically. If the Battery Pack does

to not fit the Charger properly, do not try to insert it.

U&%8&$%2&(4*%,%S,$$*(V%J,4X%"8$&%$.*%O.,(3*(1

4. Plug the Power Supply into a grounded,

120VAC, 60Hz receptacle.

5. Connect the Power Supply to the Charger.

6. Slide the Battery Pack onto the Charger.

M&$*- The Battery Pack’s capacity will increase

somewhat during the first few charging cycles.

A fully discharged Battery Pack will take about 3 to 5

hours to fully charge. %Recharging the Battery Pack

for more than 5 hours can damage the battery cells.

7. While charging, the Battery Pack, Charger, and

Power Supply may become warm to the touch.

This is normal, and does not indicate a problem.

8. The red LED will light continuously when the

Battery Pack is charged. Unplug the Charger and

disconnect it from the Battery Pack when finished.

9. Allow the Battery Pack to cool

completely before using it.

10. Press the Battery Buttons to release

Battery Pack from the Charger.

Page 9;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1Item 57383

EF;6GHIJ6KFGLIMNFLMG6MFMO6 E6GPJ

;'84$"&8#

Y*V7*##%O.'4X

T*8#%

O&W*(

G("33*(

G&(<'*%

K"83

U"(*4$"&8%

E)"$4.

S,$$*(V%

S'$$&8

S,$$*(V%J,4X

Page 10 ;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1 Item 57383

EF;6GH IJ6KFGLIM NFLMG6MFMO6E6GPJ

I/*(,$"83%L8#$('4$"&8#

%K*,9%$.*%6MGLK6%LNJIKGFMG%EF;6GH%LM;IKNFGLIM%#*4$"&8%,$%$.*%+*3"88"83%&2%$."#%

5,8',7%"847'9"83%,77%$*Z$%'89*(%#'+.*,9"83#%$.*(*"8%+*2&(*%#*$%'/%&(%'#*%&2%$."#%/(&9'4$1

E*$$"83%,89%G*#$"83

GI%JK6!6MG%E6KLIPE%LMfPKH%;KIN%FOOLU6MGFT%IJ6KFGLIM-%

N,X*%#'(*%$.,$%$.*%G("33*(%"#%"8%$.*%&22?/&#"$"&8%,89%(*5&W*%"$#%S,$$*(V%

J,4X%+*2&(*%/*(2&(5"83%,8V%/(&4*9'(*%"8%$."#%#*4$"&81

U("77%S"$%L8#$,77,$"&8

OFPGLIMg Wear heavy-duty work gloves to provide

protection when inserting and removing drill bits.

Drill bits become very hot during use.

Do not remove drill bits until the bit has cooled.

1. While holding the ring behind the collar of the

Chuck with one hand, rotate the collar of the

Chuck counterclockwise until the jaws of the

drill are opened enough to fit the drill bit.

2. Use a drill bit designed for the workpiece type.

Place the desired drill bit or screwdriver bit

into the drill between the Chuck Jaws.

M&$*- In addition to single or double-ended

screwdriver bits, adapters with hex shafts with

matching socket heads can also be used.

3. Hand tighten the Chuck until the bit is held securely

in place, centered between the Chuck Jaws.

4. Set the desired torque setting by rotating

the Torque Adjustment Ring.

a. P#*%$.*%8'5+*(*9%$&(<'*%#*$$"83#%2(&5%

>%$&%ch%2&(%9("W"83%#4(*)#=%+&7$#%,89%8'$#1

• The torque setting required depends on the

being driven. In the case of screws, consider

the size, length, and type of material.

• If a pilot hole has been drilled into the material,

a lower torque setting will be required.

• Fix the torque setting low enough to allow

a safety margin. Use a very low torque

setting when first driving small screws into

soft materials. Then adjust the setting as

the proper force required is determined.

b. P#*%$.*%#*$$"83%5,(X*9%+V%$.*%

9("77%"4&8%2&(%9("77"831

MIGLO6-%P#*%#.,(/%+"$#1%%U'77=%+*8$=%&(%9,5,3*9%

+"$#%)"77%4,'#*%#$(*##%&8%$.*%9("77%,890&(%+(*,X1

Q&(X/"*4*%,89%Q&(X%F(*,%E*$%P/

1. Designate a work area that is clean and well lit.

The work area must not allow access by children

or pets to prevent distraction and injury.

2. Secure loose workpieces using a vise or clamps

(not included) to prevent movement while working.

3. There must not be objects, such as utility lines,

nearby that will present a hazard while working.

Page 11;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1Item 57383

EF;6GHIJ6KFGLIMNFLMG6MFMO6 E6GPJ

R*8*(,7%L8#$('4$"&8#%2&(%P#*

1. Make sure that the Trigger is in the

off-position, then attach the Battery Pack.

2. Make sure that the Battery Pack clicks into

place securely. Be sure the Battery Pack

is securely seated into the Drill Handle

so it does not fall off during use.

3. Slide the Direction Switch (which should initially

be centered in the “lock” position) to the right for

forward drilling/fastening, or to the left for reversing

the operation. Use the “reverse” setting only to

remove screws or to release jammed drill bit.

QFKMLMRg Most drill bits are designed for use in

the forward, clockwise direction. Do not use a drill

bit in the opposite direction than it is designed for.

4. QFKMLMRg%%GI%JK6!6MG%E6KLIPE%LMfPKH-%

U&%8&$%4.,83*%9"(*4$"&8%&2%(&$,$"&8%)."7*%

O.'4X%"#%(&$,$"831%%Wait until Chuck has come

to a complete stop before changing direction.

5. If using the Drill to insert or remove screws, position

the driver tip in the screw to insert or remove.

6. If drilling a hole, hold the Drill above the area to drill.

7. Press the Trigger to start the drill. The Work

Light will also activate once the Switch is

pressed and turn off once Switch is released.

8. When inserting or removing a screw or bolt, use

slight pressure at first to keep the screw driver bit in

the head of the screw or bolt and cause the screw

or bolt to thread into or unthread from the material.

9. When drilling a hole, let the Drill do the work,

using only enough pressure to follow the

drill as it cuts the hole in the material.

OFPGLIMg The tool will restart automatically if stalled.

10. When finished using the Drill, release the

Trigger and center the Direction Switch to lock

the trigger mechanism as a safety measure.

11. To prevent accidents, turn off the tool and

remove its Battery Pack after use. Clean, then

store the tool indoors out of children’s reach.

Page 12 ;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1 Item 57383

EF;6GH IJ6KFGLIM NFLMG6MFMO6E6GPJ

N,"8$*8,84*%,89%E*(W"4"83%L8#$('4$"&8#

%J(&4*9'(*#%8&$%#/*4"2"4,77V%*Z/7,"8*9%"8%$."#%5,8',7%5'#$%

+*%/*(2&(5*9%&87V%+V%,%<',7"2"*9%$*4.8"4",81

GI%JK6!6MG%E6KLIPE%LMfPKH%;KIN%FOOLU6MGFT%IJ6KFGLIM-%

N,X*%#'(*%$.,$%$.*%G("33*(%"#%"8%$.*%&22?/&#"$"&8%,89%(*5&W*%"$#%S,$$*(V%

J,4X%+*2&(*%/*(2&(5"83%,8V%/(&4*9'(*%"8%$."#%#*4$"&81

GI%JK6!6MG%E6KLIPE%LMfPKH%;KIN%GIIT%;FLTPK6-%

U&%8&$%'#*%9,5,3*9%*<'"/5*8$1%%L2%,+8&(5,7%8&"#*%&(%W"+(,$"&8%

&44'(#=%.,W*%$.*%/(&+7*5%4&((*4$*9%+*2&(*%2'($.*(%'#*1

O7*,8"83=%N,"8$*8,84*=%,89%T'+("4,$"&8

1. S6;IK6%6FO_%PE6= inspect the general

condition of the tool. Check for:

• leaking, swollen, or cracked battery pack,

• loose hardware,

• misalignment or binding of moving parts,

• cracked or broken parts, and

• any other condition that may

affect its safe operation.

2. F;G6K%PE6= wipe external surfaces

of the tool with clean cloth.

3. Li-Ion BATTERY MUST BE RECYCLED OR

DISPOSED OF PROPERLY.

Do not short, incinerate or open battery.

4. Disconnect battery pack and store battery pack,

charger, and tool in dry, indoor area out of

reach of children and away from metal objects

(i.e., paperclips, coins) to prevent shorting.

Page 13;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1Item 57383

EF;6GHIJ6KFGLIMNFLMG6MFMO6 E6GPJ

G(&'+7*#.&&$"83

J(&+7*5 J&##"+7*%O,'#*# T"X*7V%E&7'$"&8#

Tool will not start. 1. Battery Pack not properly

connected.

2. Battery Pack not properly

charged.

3. Battery Pack burnt-out.

4. Internal damage or wear.

(Carbon brushes or

Trigger, for example.)

1. Remove Battery Pack, make sure there are no

obstructions, reinsert the Battery Pack according

to its shape (it should only fit one way), and press

firmly until the Battery Pack locks in place.

2. Make sure Charger is connected and

operating properly. Give enough time for

Battery Pack to recharge properly.

3. Dispose of old Battery Pack

properly or recycle. Replace Battery Pack.

4. Have technician service tool.

Tool operates slowly. 1. Forcing tool to work too fast.

2. Battery Pack wearing out.

1. Allow tool to work at its own rate.

2. Dispose of old Battery Pack

properly or recycle. Replace Battery Pack.

Performance

decreases over time.

1. Carbon brushes worn

or damaged.

2. / Bit dull or damaged.

1. Have qualified technician replace brushes.

2. Keep / bits sharp. Replace as needed.

Excessive noise

or rattling.

Internal damage or wear. (Carbon

brushes or bearings, for example.)

Have technician service tool.

Overheating. 1. Forcing tool to work too fast.

2. / Bit dull or damaged.

3. Blocked motor housing vents.

1. Allow tool to work at its own rate.

2. Keep / bits sharp. Replace as needed.

3. Wear ANSI-approved safety goggles and

NIOSH-approved dust mask/respirator while

blowing dust out of motor using compressed air.

% ;&77&)%,77%#,2*$V%/(*4,'$"&8#%).*8*W*(%9",38&#"83%&(%#*(W"4"83%$.*%$&&71%%%

U"#4&88*4$%S,$$*(V%J,4X%,89%O.,(3*(%/&)*(%#'//7V%+*2&(*%#*(W"4*1

Page 14 ;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1 Item 57383

EF;6GH IJ6KFGLIM NFLMG6MFMO6E6GPJ

J,($#%T"#$%,89%U",3(,5

JT6FE6%K6FU%G_6%;ITTIQLMR%OFK6;PTTH

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM

IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR

MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS

QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE

ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY

STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND

LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY

ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS

THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

J,($#%T"#$%,89%U",3(,5%?%U("77

J,($ U*#4("/$"&8 i$V

1 Cover Plate 1

2 Push Rod 1

3 Connector For Battery Pack 1

4 Switch 1

5 Battery Pack 1

6 Right Housing 1

7 Gear Box With Motor 1

8 Tapping Screw ST2.9x16 11

J,($ U*#4("/$"&8 i$V

9 Tapping Screw ST2.9x18 2

10 Front Cover Of Housing 1

11 Torque Setting Cover 1

12 Keyless Chuck 1

13 Screw M5 1

14 Left Housing 1

15 Charger (not shown) 1

Page 15;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1Item 57383

EF;6GHIJ6KFGLIMNFLMG6MFMO6 E6GPJ

J,($#%T"#$%,89%U",3(,5%?%;7,#.7"3.$

J,($ U*#4("/$"&8 i$V

1a Lampshade 1

2a Lamp Panel 1

3a Lamp Bowl 1

4a Circuit Board 1

5a Screw 2

6a Locating Pin Spring 1

7a Contact Rivet 2

8a Power Contact Shaft Sleeve 2

9a Left Lamp Base 1

10a Left Housing 1

J,($ U*#4("/$"&8 i$V

11a Connector for battery pack 1

12a Right Housing 1

13a Screw 9

14a Right Lamp Base 1

15a Switch Spring 1

16a Switch Button 1

17a Switch 1

18a Location Pin 2

19a Corner Lamp Contact Piece 2

K*4&(9%J(&9'4$^#%E*(",7%M'5+*(%_*(*-%

M&$*-%L2%/(&9'4$%.,#%8&%#*(",7%8'5+*(=%(*4&(9%5&8$.%,89%V*,(%&2%/'(4.,#*%"8#$*,91

M&$*- Some parts are listed and shown for illustration purposes only, and are not available individually

as replacement parts. Specify UPC 792363573832 when ordering parts from this list.

cABj>%F3&'(,%K&,9%%b%%O,7,+,#,#=%OF%D>khc%%b%%>?@@@?@AA?BCDC

T"5"$*9%Dh%U,V%Q,((,8$V

Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards,

and warrants to the original purchaser that this product is free from defects in materials and workmanship for the

period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly,

to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper

installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries

to persons or property, or for incidental, contingent, special or consequential damages arising from the use of

our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the

above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.

To take advantage of this warranty, the product or part must be returned to us with transportation charges

prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise.

If our inspection verifies the defect, we will either repair or replace the product at our election or we may

elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will

return repaired products at our expense, but if we determine there is no defect, or that the defect resulted

from causes not within the scope of our warranty, then you must bear the cost of returning the product.

This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

WARRIOR Item 57383-UPC 792363573832, 57383 Owner's manual

Related papers

Other documents