Akai AL2415TC User manual

Category
LED TVs
Type
User manual

The Akai AL2415TC is a feature-rich device that offers a wide range of capabilities to enhance your entertainment experience. With its ability to receive ATV, DTV, PC, and other input sources, you can enjoy a variety of content on its vibrant LED display. The USB port allows for convenient media playback, while the PVR functionality lets you record your favorite shows for later viewing. Additionally, the TV features various sound modes, aspect ratios, and parental control options to customize your viewing experience.

The Akai AL2415TC is a feature-rich device that offers a wide range of capabilities to enhance your entertainment experience. With its ability to receive ATV, DTV, PC, and other input sources, you can enjoy a variety of content on its vibrant LED display. The USB port allows for convenient media playback, while the PVR functionality lets you record your favorite shows for later viewing. Additionally, the TV features various sound modes, aspect ratios, and parental control options to customize your viewing experience.

P1-P17
P18-P37
1
Table Of Contents
1
2
Important Safety Instruction
Warnings and Cautions
3
4
Functional Parts(TV)
ATV Source
8-10
Rear View Of TV Set
5
Operation-Remote Control
6
Select Input Source
7
Basic Operation
7
Other Source
11
PC Source
11
DTV Source
11-12
USB Source
12
PVR Source
13-15
Table of Contents
Troubleshooting Tips
16
2
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE AND OBJECTS FILLED WITH LIQUIDS,
SUCH AS VASES, SHOULD NOT BE PLACED ON THIS APPARATUS.
The lighting flash with arrow head within a triangle is intended to tell the user that
parts inside the product are a risk of electric shock to persons.
The exclamation point within a triangle is intended to tell the user that important
operating and servicing instructions are in the papers with the appliance.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT
REMOVE COVER OR BACK. NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Important Safety Instruction
3
Warnings And Cautions
Caution
Do not drop or push objects into the television cabinet slots
or openings. Never spill any kind of liquid on the television
receiver.
Caution
Do not insert anything in the ventilation holes. If metal or
something flammable enters, it may result in fire or electric shock.
Caution
Do not place your television on an unstable cart , stand , shelf or
table. Serious injury to an individual, and damage to the television,
may result if it should fall.
Caution
Do not block the ventilation holes in the back cover.
Adequate ventilation is essential to prevent failure of electrical
component.
To prevent fire or electrical shock hazard, Do not expose the
television receiver to rain or moisture.
Warning
4
1
2
Functional Parts( TV )
To turn the TV power ON
Put the TV set on the correct place, then connect the DC plug of the AC-DC adaptor to the DC 12V socket
at the back of the TV set. Connect the adaptor main cord to the wall outlet ,then the LED indicator lamp
turns red/blue and the TV set is at Standby/work Mode. At Standby Mode, if Standby Button is pressed
the power indicator will change to blue. It will flash a few seconds before the picture appears.
To turn the TV power OFF
Press the Standby Button to make the TV set in Standby Mode, then disconnect the power plug from the
wall outlet.
NOTE:
If TV is the selected input without signal received and NO operation is performed for about 5 minutes
continuously, the TV set will enter standby mode. For any inputs other than TV, the TV set will not enter
standby mode automatically without users instruction. If you are not going to use this TV set for a long
time, switch off the set and disconnect the power plug from the wall outlet.
Front View of LED Set
1.
2. LED indicator lamp
Remote Sensor
5
Rear View Of TV Set
NOTE:
Precautions when connecting to other equipment.
When using external equipment with this TV set, please read the instruction manual of the external
equipment.
Switch off all power supplies to the equipment and TV set before connection.
Always ensure that the input and output terminals are correctly connected.
The UPDATE terminals just use to update the system software.
Back View of LED Set
1. Standby Button
2. SOURCE Button
MENU Button
3. P+ Button
P- Button
4. V+ Button
V- Button
6
Operation-Remote Control
STANDBY:
AUTO: Press to do auto configuration directly in PC source.
MUTE: Press to mute the sound. Press again or press
VOL+ to unmute.
0-9: Press 0-9 to select a TV channel directly when you are watching
TV.To enter page number in teletext mode and so on.
-/-- :Press this button to enter a program number with different
digits.eg. - for 1,-- for 11,--- for 111,---- for 1111.
:Returns to the previously viewed programme.
CH+/-: Press to scan through or to select a channel.
VOL+/-: Press to increase / decrease the sound level.
ASPECT: To select the aspect of screen.
NICAM: Change audio mode in ATV source: Stero/ Dual I/II/Mono.Change
audio mode in other source: Left/Right.
DISPLAY:Press to display the source and channels information.
/ / ◄ / ►/ K: Allows you to navigate the on-screen menus and
adjust the system settings to your preference.
MENU:Brings up the LED main menu to the screen in TV mode.
EXIT: Press EXIT to exit menu or sub menu.
SOURCE:Press to select the input source.
PMODE:Press repeatedly to cycle through the available video picture
modes.
SMODE:Press to cycle through the different sound settings.
SLEEP:Let you select amount of time before your TV turn itself off
automatically.
FAV:Press to display FAV menu in TV mode.
FAV+/-:Press to select the channel in fav channel.
EPG:Press to show the Electronic Program Guide menu.
TEXT:Switch On or Off the teletext mode.
HOLD:Hold On or Off for current page display.
TV/RADIO: Press to select TV or RADIO mode.
SUBTITLE:To switch the dialogue at the bottom of the screen.
INDEX: INDEX request the index page.
REVEAL: Press REVEAL to reveal or hidden the hidden words.
SUBPAGE: Press SUBPAGE to sub coded page access.
LANG: To show the list of audio languages available for the
current channel.
: Play/pause or begin to timeshift.
: Stop recording
: Press to go to the previous chapter.
: Press to go to the next chapter.
: Press to timeshift or play a program in fast rewind mode.
: Play a program in fast forward mode.
: To begin recording.
RED/ GREEN/ YELLOW/ BLUE: Navigation buttons in TV mode.
Switch on LED TV when at standby mode.
O
SOURCE
EXIT
TV/RADIO
LANG
AUTO
7
SELECT INPUT SOURCE
DTV
ATV
AV
SCART
YPBPR
PC
HDMI
USB
Press SOURCE button to display the input source list;
Press / button to select the input source you want to watch;
Press OK button to enter the selected source;
Press MENU button to display the MAIN OSD MENU;
Press ◄ / ► button to select the MENU you want to
adjust;
Press OK button or button to enter the sub menu;
Press / button to select the entry, then press
OK button to enter and press / to adjust the
value of selected entries;
You can press MENU or EXIT button to save and
return back to the previous menu .
BASIC OPERATION
Setup Wizard
There are Setup Wizard operations if the TV system is first time opened.
Setup Wizard(1)
Press ▼ / ▲ button to select the Language that you want to choose.
Press OK button to choose and enter the next step;
Press ► button to select Cancel. Choose Yes, there wil be Setup Wizard operations when open the TV next time.
Setup Wizard(2)
Press ▼ / ▲ button to select the Country that you want to choose.
Press OK button to choose and enter the next step;
Press ► button to select Previous or Cancel, and press OK button to confirm the selection;
Setup Wizard(3)
Press OK button to start Auto Scan;
Press ▼ button to the buttom line ,then press ◄ / ► button to select Previous or Cancel.
Setup Wizard(4)
Press Key MENU or EXIT to stop searching
Brightness
Contrast
Saturation
Sharpness
50
50
50
50
Picture Mode
Color Temp
NR
MPEG NR
Cinema Mode
Custom
Normal
Medium
Low
Low
VIDEO
Move
Exit
Select
简 介简 介
8
ATV Source
Video Menu
Press / / / button to select
Brightness/Contrast/Saturation/Sharpness,
then press OK button to enter and press ◄ /
button to adjust.
Press / / ◄ / ► button to select Picture
Mode/Color Temp/NR/MPEG NR/Cinema,
then press OK button to enter and press /
button to select which mode you want.
Brightness
Contrast
Saturation
Sharpness
50
50
50
50
Picture Mode
Color Temp
NR
MPEG NR
Cinema Mode
Custom
Normal
Medium
Low
Low
VIDEO
Move
Exit
Select
Audio Menu
AUDIO
Volume
Balance
Treble
Bass
50
0
50
51
SPDIF Output
EqualiZer
OFF
Move
Exit
Select
Press / / / button to select
Volume/Balance/Treble/Bass/ SPDIF,
then press OK button to enter and press / button
to adjust.
Press / / ◄ / ► button to select SPDIF output/E
qualizer, then press OK button to enter and Press /
button to select the Mode of SPDIF output or
Equalizer.
TV
Program Edit
EPG
Auto Search
Manual Search
Move
Exit
Select
TV MENU
Program Edit: Press / / ◄ / ► button to select
Program Table, then press OK button to enter.
Service Type: Press / / ◄ / ► button to select
Service Type, then press OK button to enter and press
OK button to adjust.
Network: Press / / ◄ / ► button to select Network, then press OK button to enter and press OK button to select
All, Rowridge, Crystal Palace, Digital Finland, Winter Hill.
Press RED button on the remote control to rename the program. Press / button to select different characters.
Press GREEN button to delete the program you dont want to remain.
Press YELLOW button to change the places of the two programs.
Press BLUE button to move the program to the new place.
FAV: Press / button to select you want to make it a favorite channel, then press ► button to select fav and press
OK buttonto confirm, press OK button again will set it to a normal channel.
9
ATV Source
Lock: Press / button to select you want to lock channel, then press ► button to select lock and press OK button
to confirm. press OK button again to cancel channel lock.
Skip: Press / button to select you want to skip channel, then press ► button to select skip and press OK button
to confirm.press OK button again to cancel skip channel.
Auto Search : Press / / ◄ / ► button to select Auto Search, then press OK button to enter.
Press / button to select Analog( or ATV), then press OK button to start search.Press / button to select
Digital, then press OK button to enter.
DVB-T: Press / button to select Aerial(or DTV), then press OK button to start searching DVB-T.
DVB-C: Press / button to select Cable, then press OK button to set the information of DVB-C Searching.
Network ID: Press ▼ / ▲ / ◄ / ► button to select Network ID, then press OK button to enter. Press ◄ / ► button to
select Auto or press the number button to set the ID by yourself, then press OK button to confirm the setting and back
to the previous menu.
Frequency: Press ▼ / ▲ / ◄ / ► button to select Frequency, then press OK button to enter. Press ◄ / ► button to
select Auto or press the number button to set the Frequency by yourself, then press OK button to confirm the setting
and back to the previous menu.
Symbol Rate: Press ▼ / ▲ / ◄ / ► button to select Symbol Rate, then press OK button to enter. Press ◄ / ► button
to select Auto or press the number button to set the Symbol Rate by yourself, then press OK button to confirm the
setting and back to the previous menu.
Demodulation: Press ▼ / ▲ / ◄ / ► button to select Demodulation, then press OK button to enter.
Press ▼ / ▲ button to select Auto \16QAM\64QAM\128QAM\256QAM. then press OK button to confirm the setting
and back to the previous menu.
Service Type: Press ▼ / ▲ / ◄ / ► button to select Service Type, then press OK button to enter. Press ▼ / ▲
button to select All Services or Free Services.then press OK button to confirm the setting and back to the previous
menu.
Scan Type: Press ▼ / ▲ / ◄ / ► button to select Scan Type, then press OK button to enter.
Press ▼ / ▲ button to select Quick Scan or Full Scan. then press OK button to confirm the setting and back to
the revious menu. Press ▼ / ▲ button to select Start, Press Start to search. After setting the above
information,Press ▼ / ▲ button to select Start, Press Start to search.
Manual Search: Press / / ◄ / ► button to select Manual Search, then press OK button to enter.
Channel No.: Press ◄ / ► button to select Channel No., then press / button to adjust.
Color System : Press ◄ / ► button to select Color System, then press / button to select Auto, SECAM, PAL.
Sound System: Press ◄ / ► button to select Sound System, then press / button to select B/G, L/L, D/K, I.
AFT: Press ◄ / ► button to select AFT, then press / button to select On or Off.
Frequency: Press ◄ / ► button to select Frequency, then press / button to adjust.
Press / / ◄ / ► button to select Country/OSD
Language/Teletext Language, then press OK button
to enter and press / button to select.
Press / / ◄ / ► button to select Reset/Setup
Wizard, then press OK button to enter and press /
button to select Yes or No.
SETUP MENU
Country
OSD Language
Teletext Language
Audio Language
Subtitle
SETUP
Norway
English
English
Setup Wizard
Reset
Move
Exit
Select
10
ATV Source
Press / button to select Time Mode/Sleep
Time/Current Time, then press OK button to enter and
press / button to select Auto or Manual.
Date: Press / button to select year, then press /
button to choose the year of current time, Chooses the
month and the day withthe similar method.
Time: Press / button to select hour, then press /
button to choose the hour of current time, Chooses the
minute with the similarmethod.
NOTE:Only when you set the Time Mode
Manual,you can set the Current Time .
TIME MENU
Time Mode
Sleep Time
Current Time
Wake UP Timer
PVR Timer
Auto
Off
TIME
Move
Exit
Select
OTHERS MENU
Format: Press / / ◄ / ► button to select Format, then press OK button to enter.
Press OK button to select FAT32, EXT3 or EXT2.After the designation, press / button to select OK button, will
demonstratethe following dialog box.
Press ◄ / ► button to select Yes, then press OK button to format the device, otherwise cancels the formatting.For
more information please refer to USB channel.
Screen Mode: Press / / ◄ / ► button to select Screen Mode.
Parental Control: Press / / ◄ / ► button to select Parental Control, then press OK button to enter.
Input password to enter, default password is 8888
Parental Lock: Press / / ◄ / ► button to select Parental Lock, then press OK button to enter and press /
button to select Off or On.When parental lock is at the off state, does not need to input the password to enter the
parental control menu directly.
Parental Rating: Press / / ◄ / ► button to select Parental Rating, then press OK button to enter and press
/ button to select between 3and 18.
Change PIN: Press / / ◄ / ► button to select Change PIN, then press OK button to enter.i
After inputting the old password, will demonstrate that inputs the new password dialog box. Input your new
password.
After inputting the new password, will demonstrate the confirmation password dialog box. Input your new password
again.After inputting the confirm password, will demonstrate Password Changed!.
Blue Screen: Press / / ◄ / ► button to select Blue Screen, then press OK button to enter and press /
button to select Off or On.
OTHERS
USB
Screen Mode
Parent Control
Blue Screen
Auto
Off
Move
Exit
Select
Press / / ◄ / ► button to select
USB/SLOT/Partition, then press OK button to enter.
Press / / ◄ / ► button to select Select, then press
OK button to enter.
Press / / ◄ / ► button to select All, then Press ◄ /
► / / button to select the program you want to play.
Press / / ◄ / ► button to select
Picture/Music/Movie, then Press ◄ / ► / / button
to select the picture you want to look. Press OK button to
enter the picture/song/Movie you have selected.
11
OTHER Source
AV/YPBPR/HDMI/SCART
Notes:
1.Video / Audio / Setup / Time menu and description are the same with the ATV source.
2.AV/YPBPR/HDMI/SCART Source non-TV menu.
Press / / ◄ / ► button to select
V.Position/H.Position/Phase/Clock, then press OK
button to enter and press ◄ / ► button to adjust.
Press / / ◄ / ► button to select Auto Adjust/Auto
Phase, then press OK button to auto adjust V.Position
and H.Position.
Reset: Press / / ◄ / ► button to select Reset, then
press OK button to return to factory settings.
Notes:
1.Video / Audio / Setup / Time menu and description
are the same with the ATV source.
2.Others menu and description are the same with the
ATV source.
PC Source
PC MENU
PC
V.Position
H.Position
Phase
Clock
Auto Adjust
Auto Phase
Reset
50
50
50
50
Move
Exit
Select
DTV Source
TV
Program Edit
EPG
Auto Search
Manual Search
Move
Exit
Select
DTV MENU
EPG: Press / / ◄ / ► button to select EPG, then
press OK button to enter.Press / / ◄ / ► button to
select program, then press OK button to remind, there
will be a iron right of the programs name.
Auto Search: Press / / ◄ / ► button to select Auto
Search, then press OK button to enter.
Manual Search: Press / / ◄ / ► button to select
Manual Search, then press OK button to enter.
12
Audio Language: Press / / ◄ / ► button to select
Audio Language/Teletext Language, then press OK
button to enter and press / button to choose.
Subtitle: Press / / ◄ / ► button to select Subtitle,
then press OK button to enter.
Subtitle: Press / / ◄ / ► button to select Subtitle,
then press OK button to enter and press / button to
choose On or Off.
Notes:
1. Press SUBTITLE button on the remote control to enter
and press / button to choose On or Off.
2. When subtitle is at “Off” state, the subtitle mode and
subtitle language show gray, will not be available.
Subtitle Mode: Press / / ◄ / ► button to select
Subtitle Mode, then press OK button to enter and press
/ button to choose Normal or Hard of Hearing.
SETUP MENU
Country
OSD Language
Audio Language
Teletext Language
Subtitle
SETUP
Norway
English
English
Setup Wizard
Reset
Move
Exit
Select
DTV Source
Common Interface
Note: The Common Interface Menu only display after CI card inserted
Press / / ◄ / ► button to select Common Interface, then press OK button to enter and press / button to
choose.
Press / / ◄ / ► button to select the options , then press OK button to see the detailed information of the CI card.
Press ◄ / ► button to select Others in the main menu, then press OK or button to enter.
Notes:
1.Video / Audio / Time menu and description are the same with the ATV source.
2.Others menu and description are the same with the ATV source.
Press MENU button on the front of panel or MENU on the remote control to display the main menu.
Press SOURCE button on the remote control, then press / button to select USB and press OK or button to
enter.
USB Source
USB
F i l e N a me : M Y RE C O RD
F i l e P a th : / m nt A l l
A l l
P i c t u r e
M u s i c
M o v i e
MYRECORD
Music Phone
111.mp3
Goodbye.mp3
DSC04632.JPG
DSC04633.JPG
DSC04634.JPG
La_lasla_Boni
Up/Down
Left/Right
Select
Picture
Press / button to select Picture and press OK button
to show all folders and the picture document.
Press / / ◄ / ► button to choose some picture
demonstration
Press OK button demonstration
Press ◄ / ► button to select , then press OKbutton to
view the previous picture.
Press ◄ / ► button to select , then press OKbutton to
view the next picture.
Press ◄ / ► button to select , then press OK button
clockwise rotating the picture.
Press ◄ / ► button to select , then press OK button
anti-clockwise rotating the picture.
Press ◄ / ► button to select , then press OK button the
menu will appear Press / button to select Repeat,
then Press ◄ / ► button select On or Off. This clause
uses in establishing whether to circulate the broadcast
picture.
Press / button to select Shuffle, then press ◄ / ►
button select On or Off. This clause uses in establishing
the picture to broad-cast stochastically.
Subtitle Language: Press / / ◄ / ► button to select Subtitle Language/Alt.Language1/2/3,
then press OK button to enter and press / button to choose.
13
PVR
Instant Recorder
Note:Make sure you have insert the USB device to the TV board before you start to do the recording.
only working for digital TV.
Press RECORD button on your remote control to start record whenever you want to start.
The LED will keep blue and there will be a recording iron on the left top of the display screen during
recording:
Press RECORD button again to set the During time of recording, to select the hour and minute,
press ▼ / ▲ button to set the number. Press button to confirm you record time setting and back to the
previous operation.
It will stop recording when have recorded for the Duration Time.
Press STOP button on your remote control to stop recording, there will be a dialog as follows:
press ◄ / ► button to select OK(to exit) or Cancel(continue recording), press OK button on
your remote control to confirm your choose.
Note: During recording,you can not callout Input Source,Menu,Text,EPG,MHEG ,FAV List and so
on unless you stop RECORD first.
Press POWER button to enter the standby mode,the recording is continue backstage.
During recording,you cant change the channel unless you stop recording first;
The PVR function doesnt support recording Subtitle, Radio Channel and locked channel.
DVB subtitles will not be recorded
14
PVR Timer
Press MENU button on the front of panel or MENU on the remote control to display the main menu.
Press ◄ / ► button to select Time in the main menu, then press OK button or to enter.
1. Press button to select PVR Timer.
2. Press OK button to enter and press ▼ / ▲ button to edit.
3. After finishing your adjustment, Press Menu or EXIT button to save and back to the previous
menu.
▼ / ▲
Timer NO
Press ▼ / ▲ button to select Time NO, then press OK button to enter and press ▼ / ▲ button to select
Timer NO, you can set 8 different PVR WakeUp Timers in all.
Timer Mode
Press ▼ / ▲ button to select Timer Mode , then press OK button to enter and press ▼ / ▲ button to
select Off, Once,Daily or Weekly.
Note:You can not set the following options if you set the Timer Mode “Off.
Wakeup Channel
Press ▼ / ▲ button to select Wakeup Channel , then press OK button to enter the Channel List
and press ▼ / ▲ button to select the program which you want to record.
Wakeup Date
Press ▼ / ▲ button to select Wakeup Date , then press ◄ / ► button to select the year, month and day,
press ▼ / ▲ button to set the number.
Press button to confirm you date setting and back to the previous operation.
On Time
Press ▼ / ▲ button to select On Time , then to select the minute and second ,p ress ▼ / ▲ button to
set the number.
Press button to confirm you start record time setting and back to the previous operation.
Duration
Press ▼ / ▲ button to select Duration ,press ◄ / ► button to select the hour and minute, press ▼ / ▲ button
to set the number.
Press button to confirm you record time setting and back to the previous operation.
PVR Timer
15
EPG Timer for PVR
Press ▼ / ▲ / ◄ / ► button to select EPG, then press OK button to enter.
Press ▼ / ▲ / ◄ / ► button to select program, then press Red button to wakeup record, there
will be a iron right of the programs name.
Note:You cant record the program which have been played
Timeshift
Press Timeshift button on your remote control to start Timeshift, the scene will stop,you can see
a dialog as f ollows a few seconds later:
Then you can press Timeshift button again to play the program.
Press OK button to callout the control bar in the bottom of the screen as follows:
The time have played
Free space and available timeshift time of your USB
The time have timeshifted
Press Stop button on your remote control or on the control bar in the bottom of the the screen to stop
Timeshift,there will be a dialog as follows:
Press OK to stop Timeshift and press Cancel to continue Timeshift.
Press Fastforward button to fastforward and press Fastback to fastback the play.
Note: During Timeshift,you can not callout Input Source, Menu,Text,EPG,MHEG ,FAV List
and so on unless you stop it first.
Press POWER button will stop the Timeshift;
During recording,you cant change the channel unless you stop it first;
The Timeshift function doesnt support Timeshift Radio Channel and locked channel.
The current programs channel No. and channel
name.
The current programs name.
The current programs broadcast date and
start-stop time.
Troubleshooting Tips
Before calling for service, you can check the following items on symptoms and solutions.
No picture:
Check other channel, maybe station problem.
Adjust the tuning control.
Ensure that the input setting is at TV state.
Ensure that the LCD is on.
Ensure that the equipment is connected properly.
No sound and distorted sound:
Ensure that the input settings for the TV and sound are proper.
Adjust the tuning control.
Probably local interference, such as an appliance.
Re-orient aerial(if indoor type).
Ensure that the equipment is connected properly.
No remote Control:
Check the battery are installed with the correct polarity.
Point the remote control unit at the remote control sensor and operate.
Remove the obstacles between the remote control and the remote control sensor.
Operate the remote control unit at a distance of not more than 8 meters from the remote control sensor.
NO SIGNAL displayed
Check if the wire is connected correctly.
Ensure the computer or other equipments are at power on mode.
Ensure the TV input setting is at pc mode.
INVALID FORMAT displayed
Check if the input setting is compatible to the monitor specification.
Led lamp indicator on but no picture
Check the monitor setting :contrast ,brightness.
Check if the wire is connected correctly.
Some unusual spots on screen:
Some dot defects may appear on the screen, like red, green or blue, Spots, However, this will have no
impact or effect on the monitor performance.
(PC mode)
(PC mode)
Lost password:
On the password screen , enter the following master password: 4886
You may use the master password to set a new password as desired .
Please remember your password and keep it carefully.
16
17
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18

Akai AL2415TC User manual

Category
LED TVs
Type
User manual

The Akai AL2415TC is a feature-rich device that offers a wide range of capabilities to enhance your entertainment experience. With its ability to receive ATV, DTV, PC, and other input sources, you can enjoy a variety of content on its vibrant LED display. The USB port allows for convenient media playback, while the PVR functionality lets you record your favorite shows for later viewing. Additionally, the TV features various sound modes, aspect ratios, and parental control options to customize your viewing experience.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI